Jump to: navigation, search

Main Toolbar

The Composer main toollbar is shown below (8.1.440 release). ToolBar814.png

Tip
Buttons on the main toolbar change based on the active perspective. Items in the toolbar might also be enabled or disabled based on the state of either the active view or editor. Sections of the main toolbar can be rearranged using the mouse.

Toolbar Buttons

The table below identifies buttons that can appear on the toolbar.  

CVNewbutton.gif
New

Select to create one of the following  new resources: Java Composer Project (includes callflows and workflows), .NET Composer Project, Project..., Grammar builder file, VoiceXML file, GrammarXML file, CallControlXML file, Backend JSP file, SCXML file, or Folder, or File.  You can also select Example or Other. Note: Before you can create a new file, you must create a project in which to store the file.

CVSavebutton.gif
Save

Saves the content of the active editor.

CVPrintbutton.gif
Print

Prints the contents of the active editor.

CVDebugbutton.gif
Debug

Re-launches the most recently launched application under debugger control, or launches the selected resource or active editor depending on the launch operation preference settings found on the Run/Debug > Launching preference page. Used for voice applications.

CVRunbutton.gif
Run

Re-launches the most recently launched application, or launches the selected resource or active editor depending on the launch operation settings found on the Run/Debug > Launching preference page. Click the down arrow to select Run As or Run Configurations. You can also organize favorites.

CVRunlasttoolbutton.gif
Run Last Tool

Allows you to quickly repeat the most recent launch in run mode or quickly run the selected resource, if that mode is supported (based on your current launch settings). Click the down arrow to select Run As or bring up the External Tool Configurations dialog box.

CVSearchbutton.gif
Search

Brings up a Search dialog box where you can perform one of the following  types of searches: File, Java, Java Script. The General > Search preference page allows you to set preferences for searches.

GAXServerPortal.gif
Launch GAX Server portal

Launches the Genesys Administrator Extension used by the GAX Server (see GAX Server OPM Block). Composer uses the host, port, username, and password used on the GAX Server Preferences page to fetch ARM parameters or audio resource IDs list.

AccDiagVar.gif
ButProjVar.gif
Access Project Variables

Opens a dialog box where you can set or delete application variables. The appearance of this button changes depending on what type of diagram you are working with. When working with a callflow or workflow, the button appears as shown on the top left. When working with an interaction process diagram, the button appears as shown on the bottom left.

ButNewJava.gif
Create Java Composer Project

Brings up a wizard dialog box for creating a new Java Composer Project.

ButNewNet.gif
Create .NET Composer Project

Brings up a wizard dialog box for creating a new .NET Composer Project.

ButNewCallFlow.gif
Create New Callflow

Brings up a wizard dialog box for creating a main callflow diagram or a sub-callflow diagram.

ButWorkflow.gif
Create New Workflow

Brings up a wizard dialog box for creating a main workflow diagram or sub-workflow diagram.

NewIPDButon.gif
Create New Interaction Process

Brings up a wizard dialog box for creating an interaction process diagram.

PropBut.gif
Show Properties View

Shows the properties of the selected diagram.

ButPrompts.gif
Open the Prompts Manager View

Displays the Prompts Manager view in the lower center pane of the Composer main window.

ButDBConn.gif
Open Database Connection Properties

Opens the Connection Profiles tab where you can define a database connection profile and test the connection. This button becomes enabled when you select the connection.properties file in the Project db folder.

GenerateAll.gif
Generate All

Opens the Generate all dialog box, which lets you create properly formatted VoiceXML or SCXML files for all callflow and/or workflows in the Project.

ButStartTom.gif
Start Tomcat

Starts the Tomcat web server, which can be used for testing and deployment. If Tomcat has already started, displays a message to this effect.

ButStopTom.gif
Stop Tomcat

Stops the Tomcat web server.

ConfigConn.gif
Connect to Configuration Server

Opens a dialog box where you can connect to Configuration Server. Used for routing applications. When you set up your Configuration Database (Configuration Server), you define certain database objects, such as agents (Persons), Agent Groups, Skills, and so on. These objects can be defined in Configuration Manager or in Genesys Administrator. When you use Composer to create SCXML routing strategies executed by Orchestration Server (and Universal Routing Server), there is a button to connect to Configuration Server. When creating a routing strategy in Composer, those Configuration Database objects will be available in the Composer routing strategy building blocks that use them. For example, you might be creating a routing strategy that routes to an Agent Group and using Composer’s Target block. The Agent Group you defined in the Configuration Database would be available for selection in the Target block.

ConfigDisConn.gif
Disconnect from Configuration Server

Disconnects from Configuration Server.

ButStatis.gif
Statistics Manager

Opens the Statistics Manager view for working with Universal Routing Server predefined statistics.  Used for routing applications.

ListObjMgrBut.gif
List Objects Manager

Opens the List Object Manager view, which allows you to create List Objects in Configuration Server. Use for creating parameterized applications. This provides System Administrators with the control to configure and change values from inside Configuration Server. Used for routing applications.

PublishBut.gif
Publish active interaction process diagram to Configuration Server

If an interaction process diagram is selected, this toolbar button appears.  

CVGenCode.gif
Generate Code

Creates a properly-formatted VoiceXML file from a callflow diagram or a SCXML file from a workflow diagram. Static pages (pure VXML or SCXML code) are generated in the src-gen folder of the Composer Project.

CVValidate.gif
Validate

Checks your diagram files and other source files for completeness and accuracy. In the case of errors, the Problems view becomes visible and error markers are put on the blocks that contain errors. Double clicking on an error in the Problems view will take you to the corresponding blocks that contain the errors. Review each of the errors and do the fixes, then validate again.

CVNextAnnotbutton.gif
Next Annotation

Selects the next annotation. Supported in the Java editor.

CVPrevAnnotbutton.gif
Previous Annotation

Selects the previous annotation. Supported in the Java editor.

CVLastEditLoc.gif
Last Edit Location

Reveals the location where the last edit occurred.

BackTo.gif
Back To

Reveals the previous editor location in the location history.

CVForwardTo.gif
Forward To

Reveals the next editor location in the location history.

ButGramConsOff.gif
Turn Grammar Constraints Off

When editing an XML file that has a set of constraints or rules defined by a DTD or an XML schema, you can turn the constraints on and off to provide flexibility in the way you edit, but still maintain the validity of the document periodically. When the constraints are turned on, and you are working in the Design view, the XML editor   prevents you from inserting elements, attributes, or attribute values not permitted by the rules of the XML schema or DTD, and from removing necessary or predefined sets of tags and values.

ReloadDep.gif
Reload Dependencies

If you make changes to a DTD file or XML schema associated with an XML file (that is currently open), click to update the XML file with these changes. The changes will be reflected in the guided editing mechanisms available in the editor, such as content assist.

ExpandAll.gif
Expand All

Select to expand all of the items in the Breakpoints view.

ButCollall.gif
Collapse All

Select to collapse all of the current elements in the view.

CVFontStyle.gif
Font Style

Allows you to change the font style of the selected text.

CVFontSize.gif
Font Size

Allows you to change the font size of the selected text.

CVBoldFont.gif
Bold Font Style

Allows you to bold the selected text.

CVItalicFont.gif
Italic Font Style

Allows you to change the selected text to italics.

CVFontColor.gif
Font Color

Allows you to change the font color of the select text.

CVFillColor.gif
Fill Color

Allows you to change the fill color of the selected object.

CVLineColor.gif
Line Color

Allows you to change the color of the selected line.

CVLineStyle.gif
Line Style

Allows you to change the style of the selected line.

CVApplyProp.gif
Apply Appearance Properties

Allows you to apply the applicable appearance properties of the first application shape to the other selected shapes.

CVSelectAll.gif
Select All

Selects all objects in the diagram.

CVArrangeAll.gif
Arrange All

Arranges all or only the selected objects in the diagram.

CVAlign.gif
Align

Aligns the selected objects in the callflow diagram: left, right, center, top, middle, bottom.

CVAutoSize.gif
Auto Size

Allows you to change the size of the selected object.

CVAllConnecLabels.gif
All Connector Labels

Shows labels for all connector lines in the diagram.  

CVNoConnLabels.gif
No Connector Labels

Hides labels for all connector lines in the diagram.

CVShowHideCompart.gif
Show/Hide Compartment

Shows or hides composite attributes within an editor, which can optionally be collapsed or expanded.

CVMagnif.gif
Magnification

Allows you to zoom and out of the current view, as well as to change the magnification from 5% to 400%. You can also  fit to height, width, or selection.

This page was last edited on November 30, 2018, at 18:46.
Comments or questions about this documentation? Contact us for support!