- 1 Entry Block
- 1.1 Name Property
- 1.2 Block Notes Property
- 1.3 Exceptions Property
- 1.4 Application Root Property
- 1.5 Global Commands Property
- 1.6 Global Properties Property
- 1.7 Scripts Property
- 1.8 Variables Property
- 1.9 System Variables
- 1.10 Condition Property
- 1.11 Logging Details Property
- 1.12 Log Level Property
- 1.13 Enable Status Property
Use an Entry block to begin an application. Only one Entry block can be present in each application. The Entry block:
- Sets global error (exception) handlers.
- Defines all global application-level properties, global variables (which appear in the list of available variables for other blocks in the diagram), and global commands. See topic Variables in Callflows.
- Sets default application scripts and parameters.
- Accesses Expression Builder.
The Entry block is used as the entry point for a main callflow or a sub-callflow. It contains the list of all the variables associated with the callflow (referred to as global variables). Note: Outlinks starting from the Entry block cannot be renamed or assigned a name through the Properties view. The Entry block has the following properties:
Find this property's details under Common Properties.
Block Notes Property
Can be used for both callflow and workflow blocks to add comments.
Note on No Input and No Match Events
When selecting exceptions for the Entry block, use both com.genesyslab.composer.toomanynoinputs / com.genesyslab.composer.toomanynomatches and noinput/nomatch to catch all the possible no input and no match events. The selection of com.genesyslab.composer.toomanynoinputs / com.genesyslab.composer.toomanynomatches is required when noinput / nomatch exceeds the maximum retries in the lower block. The selection of noinput / nomatch is required when the lower block does not retry at all.
- com.genesyslab.composer.toomanynoinputs occurs when the number of no inputs exceeds the maximum retries in the Menu, Input, DBInput, and Record blocks, and the blocks do not have local noinput exception ports.
- com.genesyslab.composer.toomanynomatches occurs when the number of no matches exceeds the maximum retries in the Menu, Input, DBInput, and Record blocks, and the blocks do not have a local nomatch exception port.
Note on error.badfetch.badxmlpage
NGI no longer supports this event. If upgrading an application from an earlier version of Composer that supported this event in its Entry object, you will need to modify that object via the Exceptions property dialog box.
Application Root Property
You have the option to specify a VXML file to be used as an application root document allowing multiple callflows to share variables. Background: Starting with 8.1.1, each Composer Project can have (at most) one root document (VXML file). If a Project has no root document, each callflow is its own stand-alone application. If a Project contains a root document, the set of callflows with Entry blocks that reference that root document make up the application.
- If a callflow or sub-callflow references an application root document, the variables specified in the application root become available for selection in all dialogs in that diagram.
- Variables defined in the application root directly under the <vxml> tag become available as global variables to callflows and sub-callflows that access them.
To select an application root document:
- Click the Application Root row in the block property table.
- Click the button to open the Select Resource dialog box.
- Select the VXML file in the Project src folder and click OK.
Global Commands Property
The Global Commands property sets rootmap elements for the entire application. A rootmap element is a phrase (user-defined phrase or external grammar) and/or tone the application reacts to at any time the application is running. Use the Global Commands property to set rootmap elements for the entire application. The application uses these rootmap elements as global grammars (subsets of a spoken language that callers are expected to use) in each Input block. Composer creates one outport for each rootmap element; the outport specifies the application path in the event to which the rootmap element is matched. Use the Entry block Global Commands property to set rootmap elements for a subcallflow as well. Note: The RootMap elements defined in the Entry block do not apply to blocks inside a subcallflow. To add, delete, or arrange global phrases, DTMF keys, and grammars:
- Click the Global Commands row in the block's property table.
- Click the button to open the Set Rootmap Commands dialog box.
Fields in Set Rootmap Commands Dialog Box
- Name-- Displays the name of the command.
- DTMF Option--Displays the DTMF key to recognize.
- Phrase-- Displays the phrase to recognize.
- Grammar--Displays the built-in or custom grammar used.
Genesys recommends that you use only the GRXML grammar. Otherwise, GSL support--which is not a part of the VoiceXML 2.1 specification--deprecates over time. Note: Built-in grammar support for languages other than U.S. English is dependent on the ASR vendor. Before using this feature, make sure that your ASR Engine supports built-in grammars for your language.
Use the Add button to enter global phrases, DTMF keys, and grammars.
- Click Add to enable Command Details fields.
- In the Name* box, accept the default name or change it.
- From the DTMF Option drop-down list, select the global DTMF key.
- In the Phrase box, type the phrase.
- In the Grammar drop-down list, select a grammar. The grammar source is the custom or built-in grammar for recognition.
Use the Up and Down buttons to reorder your rootmap elements. Select the element you want to reposition, and then click Up or Down, as necessary.
To delete a phrase, DTMF key, or grammar entry:
- Select an entry from the list.
- Click Delete.
Global Properties Property
This property allows suppression of data within the Nuance 9 platform ASR logs. For more information on this property, see the Properties topic on the Genesys Voice Platform wiki. Use Global Properties to select global settings for VXML properties, Automatic Speech Recognition vendor-specific properties or Text-to-Speech vendor-specific properties. To enter properties and values:
- Click the Global Properties row in the block's property table.
- Click the button to open the Global Property Settings dialog box.
- Click Add to enable the Property Name and Property Value fields.
- Enter or select a Property Name by doing one of the following:
- Select the Property Name from the drop-down list, or
- Type the Property Name in the Property Name field.
- Enter or select a Property Value by doing one of the following:
- Select the Property Value from the drop-down list, or
- Type the Property Value in the Property Value field.
- Click OK.
- For this property, enter the filename of your file (for example: script.js). If there are multiple files to be loaded, you can delimit by using the | character; for example: script1.js|script2.js.
- Then place the custom ECMAScript file in the Scripts subfolder of your project.
There is also a Global Variable SCRIPTSDIR, which specifies the default folder for the scripts files (and works very similar to VOXFILESDIR for audio files).
Variables can be predefined system variables (provided by Composer, which you cannot delete) or user-defined variables. See the Variables in Callflows topic for more information. Many Composer blocks have properties that require you to select a variable. Examples:
- The following callflow blocks contain a mandatory Output Result property: Menu, Record, DB Input, Grammar Menu, Input, Get Access Number Block, Transfer, and Statistics. After defining variables in the Entry block, you supply this property by selecting the variable to contain the output result.
- When creating a new voice project, a Project-level flag, Enable_ICM, controls whether ICM variables are available for selection and assignment to variables within Composer's Entry block.
To declare for the application or subcallflow:
- Click the Variables row in the block's property table.
- Click the button to open the Application Variables dialog box.
The above figure shows the dialog box after click the Add button. The Value field for the new variable (Var0) contains a button to access Expression Builder. Important! When defining a variable name, the name:
- Must not start with a number or underscore.
- May consist of letters, numbers, or underscores.
When you define and initialize a variable that is expected to be played as a date later on in the callflow, define the value using the following format: yyyyymmdd. Example: MyDate=20090618. You must use this format; Composer does not perform any conversions in this case. When you define and initialize a variable that is expected to be played as a time later on in the callflow, define a 12 hour-based value using the following format: hhmmssa or hhmmssp. Example: MyTime=115900a or MyTime=063700p. Define a 24 hour-based value using the following format: hhmmssh Example: MyTime=192000h. You must use this format; Composer does not perform any conversions in this case. If variables are set as part of provisioning by the Genesys VoiceXML provisioning system, and if these variables have the same names as variables set in the Variables property dialog box, the VoiceXML provisioning system values take precedence over the global variables set here. Many blocks enable the use of variables rather than static data. For example, the Prompt block can play the value of a variable as Text-to-Speech. Variables whose values are to be used in other blocks must be declared here so that they appear in the list of available variables in other blocks. The value collected by an Input block or a Menu block is saved as a session variable whose name is the same as the block Name.
These variables apply only to the Entry block, unless otherwise indicated.
- APP_LANGUAGE--Holds the application language setting. The value should be the RFC 3066 language tag of an installed language pack. Examples of valid RFC 3066 language tags include en-US and fr-FR. This setting also acts as a default language for the application. This variable may be set using the Set Language block for a multilingual application.
- APP ASR LANGUAGE--Holds the language locale for ASR resources. You must define this variable if the application needs to use a different language locale for ASR from TTS resources.
- GRAMMARFILEDIR--Gives the relative path from the application to the directory that contains the grammar files. By default, it is set to ../Resources/Grammars. If a voice application supports multiple languages, you can enable the application to switch between them, by changing the value of this variable. In the Subcallflow_Start block, the GRAMMARFILEDIR global variables are not defined by default. This allows the subcallflows to inherit the value of this variable from the main callflow. If the subcallflow overrides this value, the variable can be defined in the Subcallflow_Start block.
- VOXFILEDIR--Gives the relative path in the application to the directory that contains the audio files (.vox/.wav). By default, it is set to ../Resources/Prompts. If a voice application supports multiple languages, you can enable the application to switch between them, by changing the value of this variable. In the Subcallflow_Start block, the VOXFILEDIR global variables are not defined by default. This allows the subcallflows to inherit the value of this variable from the main callflow. If the subcallflow overrides this value, the variable can be defined in the Subcallflow_Start block.
- EnableReports--Enables VAR reporting. (Reporting blocks)
- EnableSNMP--Enables the SNMP block, if present in the application
- CallUUID--Session connection Universal ID
- GVPSessionID--The Genesys Userdata Session ID
- LAST_EVENT_NAME--Stores the name of the last event or error that was handled in the Entry block.
- LAST_EVENT_MSG--Stores the message of the last event or error that was handled in the Entry block
- LAST_EVENT_URL--Stores the URL of the last event or error that was handled in the Entry block.
- LAST_EVENT_ELEMENT--Stores the element name of the last event or error that was handled in the Entry block
- LAST_EVENT_LINE--Stores the line number of the last event or error that was handled in the Entry block
- EnableFCR--A flag for enabling Full Call Recording
- COMPOSER WSSTUBBING
- App_OPM--Used for fetching OPM parameters. Stores JSON content passed by GVP in session variables. Available throughout the callflow diagram. The OPM block works with this variable by extracting values from it into application variables. Available for main callflows only.
- OCS_RecordURI--Used by Outbound blocks. Its default value will be set from userdata passed into the application. For workflows (SCXML): _genesys.ixn.interactions[InteractionID].udata.GSW_RECORD_URI.For callflows: (VXML) session.com.genesyslab.userdata.GSW_RECORD_URI.
- OCS_URI--Used by Outbound blocks. Holds the OCS resource path ([http|https]://<host>:<port>). Its default value will be deduced from OCS_Record_URI. You may change this variable value in order to use a different OCS application for all Outbound blocks in the workflow.
- OCS_Record--Used by Outbound blocks. Holds the Record Handle value deduced from OCS_Record_URI.
Note: Request URi parameters created in IVR Profiles during the VoiceXML application provisioning are passed to the Composer generated VoiceXML application as request-uri parameters in the session.connection.protocol.sip.requesturi session array. An Entry block variable can use these parameters by setting the following expressions to the variable values: typeof session.connection.protocol.sip.requesturi['var1'] == 'undefined' ? "LocalDefaultValue" : session.connection.protocol.sip.requesturi['var1']. If parameters are set as part of IVR Profiles provisioning in the Genesys VoiceXML provisioning system, and if these parameters have the same names as variables set in the Entry block's Variables property with the above mentioned sip.requesturi expression, then the SIP-Request-URI parameters will take precedence over the user variable values set in the Entry block.
Many blocks enable the use of variables rather than static data. For example, the Prompt block can play the value of a variable as Text-to-Speech. Variables whose values are to be used in other blocks must be declared here so that they appear in the list of available variables in other blocks. The value collected by an Input block or a Menu block is saved as a session variable whose name is the same as the block name.
You can use the Variable name field for either of the following purposes:
- To enter the name of a new variable.
- To change the name of an existing variable. To do this, select an existing variable from the list of variables. The variable's name appears in the Variable box, and you can the change its value in the Value box.
The Variable name field will not accept the following special characters:
- less-than sign (<)
- greater-than sign (>)
- double quotation mark ()
- apostrophe (‘)
- asterisk (*)
- ampersand (&)
- pound (#)
- percentage (%)
- semi colon (;)
- question mark (?)
- period (.)
The variable Value field will not accept the following special characters:
- less-than sign (<)
- greater-than sign (>)
- double quotation mark ()
- apostrophe (‘)
- ampersand (&)
- plus sign (+)
- minus sign (-)
- asterisk (*)
- percentage (%)