channel-any_name_for_sms Section
- default-reply-address
- driver-classname
- inbound-route
- password
- reconnection-timeout
- session-by-address
- session-by-text
- x-debug-mode
- x-smpp-address-range
- x-smpp-bind-mode
- x-smpp-comms-timeout
- x-smpp-delivery-report
- x-smpp-dest-addr-npi
- x-smpp-dest-addr-ton
- x-smpp-empty-message
- x-smpp-enquire-link-timeout
- x-smpp-extraopt
- x-smpp-host
- x-smpp-inbound-enc-default
- x-smpp-outbound-enc-default
- x-smpp-port
- x-smpp-receive-timeout
- x-smpp-response-max-waiting-time
- x-smpp-sar-max-segments
- x-smpp-sar-prompt-responses
- x-smpp-service-type
- x-smpp-src-addr-npi
- x-smpp-src-addr-ton
- x-smpp-submit-max-rate
- x-smpp-submit-window-size
- x-smpp-system-id
- x-smpp-system-type
- x-smpp-ucs2-enc-schema
- x-smpp-use-msg-payload
- x-smpp-validity-period
default-reply-address
Default Value: No default value
Valid Values: Any valid phone number for SMS messages.
Changes Take Effect: After restart
Specifies the default reply phone number for outbound SMS messages. This value is used when the FROM-phone number is not specified in the ESP request.
driver-classname
Default Value: com.genesyslab.mcr.smserver.channel.sms_mms.opensmpp.SmppDriver
Valid Values: com.genesyslab.mcr.smserver.channel.sms_mms.opensmpp.SmppDriver
Changes Take Effect: After restart
Specifies the class name of the driver used to connect to a media service provider.
inbound-route
Default Value: No default value
Valid Values: Comma-separated list of endpoints
Changes Take Effect: After restart
Specifies the endpoints for inbound messages arriving from the media channel.
For example:
101:sms_endpoint -- endpoint for 'regular' interactions, which are processed in 'paging' mode
101:sms_endpoint, 101:chat_endpoint -- same as previous, plus additional end point that Chat Server uses to place interactions in 'chat session' mode
password
Default Value: No default value
Valid Values: An empty string, or a valid password.
Changes Take Effect: After restart
Specifies the password used to connect to the messaging provider (SMSC,MMSC, and others).
reconnection-timeout
Default Value: 180
Valid Values: Any integer greater than or equal to 10.
Changes Take Effect: After restart
Specifies the delay, in seconds, before the server starts the reconnection procedure for this media channel if the connection was lost.
session-by-address
Default Value: No default value
Valid Values: Empty string or valid regular expression.
Changes Take Effect: After restart
Specifies the regular expression that is used to detect a request for session mode. The server matches an inbound message's destination address (a call center's inbound phone number) against this regular expression. If the matching result is true, and a chat session is not already in progress for this mobile client, and an inbound route is not a single-mode paging route, the server initiates a chat session.
session-by-text
Default Value: No default value
Valid Values: Empty string or valid regular expression.
Changes Take Effect: After restart
Specifies the regular expression that is used to detect a request for session mode. The server matches an inbound message's content against this regular expression. If the matching result is true, and a chat session is not already in progress for this mobile client, and an inbound route is not a single-mode paging route, the server initiates a chat session.
x-debug-mode
Default Value: false
Valid Values: true, false
Changes Take Effect: Immediately
If set to true, an extended form of logging is set for the server. If set to false, a reduced form of logging is set for the server.
x-smpp-address-range
Default Value: No default value
Valid Values: An empty string or a range of phone numbers in form of a regular expression
Changes Take Effect: After restart
This option is used in the bind command to specify a set of addresses (phone numbers) serviced by the External Short Message Entity (ESME). A single address can also be specified. This option may be omitted if the range is unspecified. Messages addressed to any destination in this range are routed to the ESME. UNIX Regular Expression notation must be used to specify a range of addresses. Full explanations of UNIX regular expressions can be found in section 5 of the standard on-line UNIX manuals (man 5 regexp).
x-smpp-bind-mode
Default Value: auto
Valid Values:
- auto: The behavior is as in previous releases: SMS Server tries to bind with SMSC using a duplex transceiver connection. If that fails, it tries two simplex connections, one transmitter and one receiver.
- trx: SMS Server tries to bind with SMSC using a duplex transceiver connection only.
- txrx: SMS Server tries to bind with SMSC using two simplex connections, one transmitter and one receiver
Changes Take Effect: After restart
Specifies the mode that SMS Server uses to bind with the SMSC.
x-smpp-comms-timeout
Default Value: 60
Valid Values: 1 - 600
Changes Take Effect: After restart
Specifies the timeout, in seconds, used for calls to underlying communication functions.
x-smpp-delivery-report
Default Value: noreports
Valid Values:
- noreports: No reports.
- reportboth: Both Successfully Delivered and Delivery Failed reports.
- reportndyd: Delivery Failed reports only.
- 0: Unknown
- 1: ISDN (E163/E164)
- 3: Data (X.121)
- 4: Telex (F.69)
- 6: Land Mobile (E.212)
- 8: National
- 9: Private
- 10: ERMES
- 14: Internet (IP)
- 18: WAP Client ID (to be defined by WAP Forum)
- 0: Unknown
- 1: International
- 2: National
- 3: Network-specific
- 4: Subscriber number
- 5: Alphanumeric
- 6: Abbreviated
- 1: IA5 (CCITT T.50)/ASCII (ANSI X3.4)
- 3: ISO 8859-1, Latin alphabet No. 1
- 6: Cyrillic (ISO-8859-5)
- 7: Latin/Hebrew (ISO-8859-8)
- 8: UCS2 (ISO/IEC-10646), is used with option x-smpp-ucs2-enc-schema
- 301: GSM 03.38, 8-bit packing
- 302: GSM 03.38, 7-bit packing
- 1: IA5 (CCITT T.50)/ASCII (ANSI X3.4)
- 3: ISO 8859-1, Latin alphabet No. 1
- 6: Cyrillic (ISO-8859-5)
- 7: Latin/Hebrew (ISO-8859-8)
- 8: UCS2 (ISO/IEC-10646), is used with option x-smpp-ucs2-enc-schema
- 301: GSM 03.38, 8-bit packing
- 302: GSM 03.38, 7-bit packing
- false - All required deliver_sm_resp PDUs (for each deliver_sm received) are sent after all segments of the multi-segmented message are received, reassembled and successfully submitted to Interaction Server.
- true - deliver_sm_resp PDU (for each deliver_sm received) is sent immediately for each segment of multi-segmented message received. The last response is sent after all segments are received, reassembled and successfully submitted to Interaction Server.
- 0: Unknown
- 1: ISDN (E163/E164)
- 3: Data (X.121)
- 4: Telex (F.69)
- 6: Land Mobile (E.212)
- 8: National
- 9: Private
- 10: ERMES
- 14: Internet (IP)
- 18: WAP Client ID (to be defined by WAP Forum)
- 0: Unknown
- 1: International
- 2: National
- 3: Network-specific
- 4: Subscriber number
- 5: Alphanumeric
- 6: Abbreviated
- UCS-2BE: Big Endian, Byte Order Mark (BOM) is not used.
- UCS-2LE: Little Endian, BOM is not used.
- UCS-2: BOM is used.
Changes Take Effect: After restart
Specifies the default types of delivery report that SMS Server requests for outbound messages.
x-smpp-dest-addr-npi
Default Value: 1
Changes Take Effect: After restart
Specifies the numbering plan indicator (NPI) used in the destination address of outbound messages. Note: Values are specified in SMPP Protocol V3.4. The parameters set by this option are overridden by the ESP request for an individual message if it contains different settings.
x-smpp-dest-addr-ton
Default Value: 1
Changes Take Effect: After restart
Specifies the type of number (TON) used in the destination address of outbound messages. Note: Values are specified in SMPP Protocol V3.4. The parameters set by this option are overridden by the ESP request for an individual message if it contains different settings.
x-smpp-empty-message
Default Value: No default value
Valid Values: Any string
Changes Take Effect: After restart
Specifies replacement text for inbound empty messages. If the option is empty or is not specified, then one blank character is used as a replacement.
x-smpp-enquire-link-timeout
Default Value: 60
Valid Values: Any integer greater than or equal to 30
Changes Take Effect: After restart
Specifies how often, in seconds, the server sends the SMPP enquire-link command to SMSC (to check the connection with the messaging provider). If a disconnected state is detected, SMS Servers starts the reconnection procedure for this messaging channel.
x-smpp-extraopt
Default Value: No default value
Valid Values: String with TLV options specification
Changes Take Effect: After restart
Specifies default values for extra options used in SMPP PDU. The option value is used by SMS Server to form extra options of PDU, if this value is not specified in ESP requests to SMS Server.
x-smpp-host
Default Value: No default value
Valid Values: Any valid host name
Changes Take Effect: After restart
Specifies the name of the messaging provider host.
x-smpp-inbound-enc-default
Default Value: 301
Changes Take Effect: After restart
Defines the encoding scheme used to decode inbound messages when no encoding value is specified in the PDU. If the 'deliver_sm' PDU contains a specific value in its 'data_coding' parameter, then SMS Server uses that value; otherwise it uses the value of this option.
x-smpp-outbound-enc-default
Default Value: 301
Changes Take Effect: After restart
Defines the encoding scheme used to code outbound messages. SMS Server places this value in the 'data_coding' parameter of the PDU, except that for encodings 301 and 302 it places the value 0 in the PDU.
x-smpp-port
Default Value: No default value
Valid Values: Any valid port
Changes Take Effect: After restart
Specifies the port used to connect to the messaging provider. only.
x-smpp-receive-timeout
Default Value: 60
Valid Values: 1-600
Changes Take Effect: After restart
Specifies, in seconds, the timeout for receiving data from the connection.
x-smpp-response-max-waiting-time
Default Value: 30000
Valid Values: Integer 1000 - 180000
Changes Take Effect: After restart
Specifies in milliseconds, the maximum time the server waits for a response from SMSC for a submitted SMPP message. SMS Server considers the submission to have failed after this waiting time expires.
x-smpp-sar-max-segments
Default Value: 255
Valid Values: Integer 2 - 255
Changes Take Effect: After restart
Specifies the maximum number of segments used in transmitting long messages to an SMS Center. Outbound messages that exceed this number are rejected by SMS Server and a negative response is sent to the ESP requester.
x-smpp-sar-prompt-responses
Default Value: false
Valid Values: true, false
Changes Take Effect: After restart
x-smpp-service-type
Default Value: No default value
Valid Values: Any string, no longer than 6 characters
Changes Take Effect: After restart
Indicates the SMS Application service associated with the message. This option can be omitted or specified as an empty string to specify default SMSC settings.
x-smpp-src-addr-npi
Default Value: 1
Changes Take Effect: After restart
Specifies the numbering plan indicator (NPI) used in the source address of outbound messages and in the address-range parameter of the SMPP bind command. Note: Values are specified in SMPP Protocol V3.4. The parameters set by this option are overridden by the ESP request for an individual message if it contains different settings.
x-smpp-src-addr-ton
Default Value: 1
Changes Take Effect: After restart
Specifies the type of number (TON) used in the source address of outbound messages and in the address-range parameter of the SMPP bind command. Note: Values are specified in SMPP Protocol V3.4. The parameters set by this option are overridden by the ESP request for an individual message if it contains different settings
x-smpp-submit-max-rate
Default Value: 10
Valid Values: Integer 1 - 1000
Changes Take Effect: After restart
Specifies the maximum number of messages per second sent by server to SMSC.
x-smpp-submit-window-size
Default Value: 10
Valid Values: Integer 1 - 1000
Changes Take Effect: After restart
Specifies the number of messages that the server will send without a confirmation from the SMSC. Once this limit is reached, the server stops sending, and will send new messages only after receiving confirmation of previous messages.
x-smpp-system-id
Default Value: No default value
Valid Values: string
Changes Take Effect: After restart
Specifies the login name used to connect to the messaging provider.
x-smpp-system-type
Default Value: No default value
Valid Values: An empty string (null value), or any valid name, no longer than 13 characters
Changes Take Effect: After restart
Specifies the type of External Short Message Entity (ESME) that is binding to the SMSC. Some SMSCs might not require the ESME to provide this detail; in that case, this option must be omitted or specified as an empty string.
x-smpp-ucs2-enc-schema
Default Value: UCS-2BE
Changes Take Effect: After restart
Specifies the encoding scheme that the SMS Server uses for UCS-2 encoding. The schema is used for inbound and outbound messages. Note: This option is applicable to inbound messages if x-smpp-inbound-enc-default is set to 8 and to outbound messages if x-smpp-outbound-enc-default is set to 8.
x-smpp-use-msg-payload
Default Value: false
Valid Values: true, false
Changes Take Effect: After restart
Specifies the default method for including the content of outbound messages in SNPP PDUs: as a mandatory parameter (false), or as the optional parameter 'message_payload' (true). The option is applicable to outbound messages.
x-smpp-validity-period
Default Value: No default value
Valid Values: Absolute time format or relative time format. See SMPP documentation
Changes Take Effect: After restart
Specifies the validity period. The validity_period parameter indicates the SMSC expiration time, after which the message
should be discarded if it has not been delivered to the destination. It can be defined in absolute time format
or relative time format; see the SMPP documentation.
For example, a value of 020610233429000R would be interpreted as a relative period of 2 years, 6 months, 10 days, 23 hours, 34
minutes and 29 seconds from the current SMSC time.