Jump to: navigation, search

settings



  


ucs-reconnect-timeout

Default Value: 80000
Valid Values: Any integer greater than 0. Should be set higher than UCS's DAP time-out
Changes Take Effect: At start/restart


Specifies, in milliseconds, the timeout of E-mail Server's connection to UCS. Starting in release 8.1.400.00, if UCS has the timeout set to 0 for its DAP connection, this is interpreted as 60 seconds. Previously 0 was interpreted as an infinite timeout. The default value of 65 seconds for the connection from E-mail Server to UCS then ensures that E-mail Server works well with UCS out of the box; that is, without changing any default values.

Specifies, in milliseconds, the timeout of E-mail Server's connection to UCS. Starting in release 8.1.400.00, if UCS has the timeout set to 0 for its DAP connection, this is interpreted as 60 seconds. Previously 0 was interpreted as an infinite timeout. The default value of 65 seconds for the connection from E-mail Server to UCS then ensures that E-mail Server works well with UCS out of the box; that is, without changing any default values.

Important
To avoid inconsistency, E-mail Server, like every other client of UCS, should have the timeout of its connection to UCS set to a higher value than the timeout of UCS's connection to its Database Access Point (DAP). This allows UCS to consistently either perform long queries or abort them, in accord with the clients' requirements.

Feedback

Comment on this article:

blog comments powered by Disqus
This page was last modified on May 14, 2015, at 12:41.