Deployment of RSYNC on a Solaris host
This section describes how a Solaris application server host can be configured with RSYNC for LFMT collection.
Installation of RSYNC on Solaris
- Download the following software packages from the website www.sunfreeware.com:
- libgcc-3.4.6-sol10-sparc-local.gz
- popt-1.16-sol10-sparc-local.gz
- libiconv-1.14-sol10-sparc-local.gz
- libintl-3.4.0-sol10-sparc-local.gz
- rsync-3.0.9-sol10-sparc-local.gz
- Copy each file to the /usr/sfw/bin directory on the Solaris host.
- Unzip and install the file libgcc-3.4.6-sol10-sparc-local.gz from the
/usr/sfw/bin directory, as follows:
- Enter the following commands to unzip the file and start the installation:
gunzip libgcc-3.4.6-sol10-sparc-local.gz pkgadd -G -d libgcc-3.4.6-sol10-sparc-local
- When prompted for the packages to be processed, enter all or press Enter.
- When prompted if you want to create the base directory, enter y.
When installation is complete, the following message appears:
Installation of <SMClgcc346> was successful. - Enter the following commands to unzip the file and start the installation:
- Unzip and install the file popt-1.16-sol10-sparc-local.gz from the
/usr/sfw/bin directory, as follows:
- Enter the following commands to unzip the file and start the
installation:
gunzip popt-1.16-sol10-sparc-local.gz pkgadd -G -d popt-1.16-sol10-sparc-local
- When prompted for the packages to be processed, enter all or press Enter.
When installation is complete, the following message appears:
Installation of <SMCpopt> was successful. - Enter the following commands to unzip the file and start the
installation:
- Unzip and install the file libiconv-1.14-sol10-sparc-local.gz from the
/usr/sfw/bin directory, as follows:
- Enter the following commands to unzip the file and start the
installation:
gunzip libiconv-1.14-sol10-sparc-local.gz pkgadd -G -d libiconv-1.14-sol10-sparc-local
- When prompted for the packages to be processed, enter all or press Enter.
When installation is complete, the following message appears:
Installation of <SMCliconv> was successful. - Enter the following commands to unzip the file and start the
installation:
- Unzip and install the file libintl-3.4.0-sol10-sparc-local.gz from the
/usr/sfw/bin directory, as follows:
- Enter the following commands to unzip the file and start the
installation:
gunzip libintl-3.4.0-sol10-sparc-local.gz pkgadd -G -d libintl-3.4.0-sol10-sparc-local
- When prompted for the packages to be processed, enter all or press Enter.
When installation is complete, the following message appears:
Installation of <SMClintl> was successful. - Enter the following commands to unzip the file and start the
installation:
- Unzip and install the file rsync-3.0.9-sol10-sparc-local.gz from the
/usr/sfw/bin directory, as follows:
- Enter the following commands to unzip the file and start the
installation:
gunzip rsync-3.0.9-sol10-sparc-local.gz pkgadd -G -d rsync-3.0.9-sol10-sparc-local
- When prompted for the packages to be processed, enter all or press Enter.
When installation is complete, the following message appears:
Installation of <SMCrsync> was successful. - Enter the following commands to unzip the file and start the
installation:
- Make sure that RSYNC is in the /usr/bin directory. To check, enter the
command which rsync. You will get one of two responses:
- /usr/bin/rsync—RSYNC is in the correct directory.
- <install directory/rsync>—RSYNC is not in the correct directory; enter cp <install directory/rsync> /usr/bin to copy it to the correct directory.
- Repeat this procedure, starting at step 2 for each Solaris host.
This page was last edited on November 29, 2019, at 14:41.
Comments or questions about this documentation? Contact us for support!