Jump to: navigation, search

mediacontroller Section

PDF This Page



     


allow_dialog_transfer

Default Value: 1

Valid Values:

  • true Enable transfers through dialog
  • false Disable transfers through dialog
    Changes Take Effect: immediately
    Allows SIP dialog transfer. If this parameter is set to false, all incoming SIP REFER will be automatically rejected with SIP 403. Otherwise, the request will be forward to the CCXML application.

    >> Back to Top

    bridge_server

    Default Value: $LocalIP$:5060
    Valid Values: A valid IP address:Port can only contain alphanumeric characters, '.', '-', ':', ' ','/' and '\' characters
    Changes Take Effect: immediately


    The address of SIP Bridge Server for use when the two end-points cannot be joined due to media bridging limitations.
    Bridge Server must be able to
  • send media to multiple end-points
  • send and receive from distinct end-points and
  • have transcoding capability.

    >> Back to Top

    bridge_server.defaultmaxsize

    Default Value: 4
    Valid Values: From 1 to 1000 inclusive
    Changes Take Effect: immediately


    This controls the confmaxsize URI parameter when conference is set up in the bridge server.

    >> Back to Top

    bridge_server.defaultreserve

    Default Value: 4
    Valid Values: From 1 to 1000 inclusive
    Changes Take Effect: immediately


    This controls the confreserve URI parameter when conference is set up in the bridge server.

    >> Back to Top

    bridge_server.profile

    Default Value: Default Conference
    Valid Values:
    Changes Take Effect: immediately


    The name of device profile to use with the configured Bridge Server.

    >> Back to Top

    bridge_sips_server

    Default Value: $LocalIP$:5061
    Valid Values: A valid IP address:Port can only contain alphanumeric characters, '.', '-', ':', ' ','/' and '\' characters
    Changes Take Effect: immediately


    The address of SIP secure Bridge Server for use when the two end-points cannot be joined due to media bridging limitations.
    Bridge Server must be able to
  • send media to multiple end-points
  • send and receive from distinct end-points and
  • have transcoding capability.

    >> Back to Top

    codec_check_exclusion.payloads

    Default Value: 13
    Valid Values:
    Changes Take Effect: immediately


    A list of space delimited payloads that will be excluded during codec checking for join result determination.

    >> Back to Top

    conference.defaultreserve

    Default Value: 8
    Valid Values:
    Changes Take Effect: immediately


    Default URI confreserve parameter for conference server if requested reserve size is not defined

    >> Back to Top

    defaultrejectcode

    Default Value: 480
    Valid Values:
    Changes Take Effect: immediately


    Specifies the default SIP Response code to use when an incoming call is rejected by the application

    >> Back to Top

    full_audio_codec

    Default Value: 0|pcmu|audio/basic|8000|1 8|pcma|audio/x-alaw-basic|8000|1 9|g722|audio/g722|8000|1 23|g726-16|audio/g726-16|8000|1 22|g726-16|audio/g726-16|8000|1 2|g726-32|audio/g726|8000|1 125|g726-40|audio/g726-40|8000|1 18|g729|audio/g729|8000|1 3|gsm|audio/x-gsm|8000|1 105|AMR|audio/AMR|8000|1 112|AMR-WB|audio/AMR-WB|16000|1 101|telephone-event|none|8000|1
    Valid Values:
    Changes Take Effect: immediately


    This defines the audio codecs that get set in the SDP in an initial offer with no media bridge. Codec entry has to be in the format of: payload|name|mime|rate|#channels. Each codec entry is separated by a whitespace.

    >> Back to Top

    full_video_codec

    Default Value: 34|h263|video/H263|90000|1 99|h263-1998|video/H263-1998|90000|1 113|H264|video/H264|90000|1
    Valid Values:
    Changes Take Effect: immediately


    This defines the video codecs that get set in the SDP in an initial offer with no media bridge. Codec entry has to be in the format of: payload|name|mime|rate|#channels. Each codec entry is separated by a whitespace.

    >> Back to Top

    inbound_allowed_media

    Default Value: dynamic
    Valid Values: Must be one of the following:

  • dynamic
  • audio video
  • audio
  • video
    Changes Take Effect: immediately
    The default allowed media types for an inbound call. All inbound calls will be limited to this set of media types in terms of SDP exchange. If set to dynamic, media type is determined from the capability SDP of the inbound call (if capability SDP is not available, it defaults to audio and video).

    >> Back to Top

    sdp.defaultipversion

    Default Value: true
    Valid Values: ipv4, ipv6
    Changes Take Effect: immediately


    Default IP version to be used in SDP message, apply to initiated SDP offer to unjoined endpoint. Valid values are "ipv4" or "ipv6".

    >> Back to Top

    sdp.localhost

    Default Value: $LocalIP$
    Valid Values:
    Changes Take Effect: immediately


    The local host IPv4 address (only the host part) that will be used in SDP.

    >> Back to Top

    sdp.localhost.ipv6

    Default Value: $LocalIPv6$
    Valid Values:
    Changes Take Effect: immediately


    The local host IPv6 address (only the host part) that will be used in SDP.

    >> Back to Top

    sip.allowedunknownheaders

    Default Value:


    Valid Values:
    Changes Take Effect: immediately


    This parameter takes a space delimited list of acceptable unknown header list. Unknown headers received from SIP messages that are not part of this list will be ignored. It will not be accessable from the application. Specifying a wilcard (*) means all unknown headers are allowed.

    >> Back to Top

    sipproxy

    Default Value: $LocalIP$:5060
    Valid Values: A valid IP address:Port can only contain alphanumeric characters, '.', '-', ':', ' ','/' and '\' characters
    Changes Take Effect: immediately


    The address of SIP Proxy for outbound SIP requests. Should be specified like 10.10.30.205:5070

    >> Back to Top

    sipsecure

    Default Value: 0

    Valid Values:
  • true Using SIP Secure protocol
  • false Not using SIP Secure protocol
    Changes Take Effect: immediately
    If this flag is set to true, all the outbound sip requests would be in SIP secure protocol. Note, the hints attribute of the CCXML elements that initiates an out bound request can over write this configuration.

    >> Back to Top

    sipsproxy

    Default Value: $LocalIP$:5061
    Valid Values: A valid IP address:Port can only contain alphanumeric characters, '.', '-', ':', ' ','/' and '\' characters
    Changes Take Effect: immediately


    The address of SIP Secure Proxy for outbound SIP requests. Should be specified like 10.10.30.205:5071

    >> Back to Top
    • This page was last edited on July 24, 2017, at 09:10.
    Comments or questions about this documentation? Contact us for support!