Jump to: navigation, search

GatewayManager Section



  


LocalSIPPort

Default Value: 5170
Valid Values:
Changes Take Effect: After restart


Specifies local SIP Port Number to be used by PSTN Connector for SIP Communication

SessionTimerSE

Default Value: 1800
Valid Values:
Changes Take Effect: After restart


The time interval in seconds which a call session must be refreshed, otherwise the session expires.

SessionTimerSupport

Default Value: true
Valid Values:
Changes Take Effect: After restart


Controls whether Session Timer support is enabled for a call session

TNZXferPrehangupWaitTime

Default Value: 4000
Valid Values:
Changes Take Effect: After restart


Time to wait before hangup after receving the successful response for dialing digits

UserAgentAddr

Default Value:
Valid Values:
Changes Take Effect: After restart


When PSTN Connector receives a TDM call, this is the destination to which it will send the SIP call. Usually this would be the SIP Server IP Address

UserAgentPort

Default Value:
Valid Values:
Changes Take Effect: After restart


The destination Port Number for PSTN Connector on the SIP side. This would be SIP Server Port Number

This page was last modified on July 24, 2017, at 01:09.

Feedback

Comment on this article:

blog comments powered by Disqus