Jump to: navigation, search

Tenant1 Section



  


AccessGroup

Default Value:
Valid Values:
Changes Take Effect: After restart


The Access Group controls enabling of Digest Authentication for a tenant. The users configured under access group are allowed to send HTTP requests to SSG.

DialPrefix

Default Value:
Valid Values:
Changes Take Effect: After restart


The dial prefix, if present, will be prepended to all the target numbers. This applies to all outbound calls (across all IVR profiles) for the tenant. The dial prefix can be used, for example, to select a specific trunk in SIP Server or to select a specific ROUTE in PSTN Connector or to pass some predefined numbers to the switch (if the outbound call is going out via a switch) or any combination of these. Please see GVP User Guide for more details. This parameter is optional.

RPDN

Default Value:
Valid Values:
Changes Take Effect: After restart


The Routing Point DN is used by SSG to make outbound calls in case of Legacy GVP VXML Interpreter is used to play the IVR

TGDN

Default Value:
Valid Values:
Changes Take Effect: After restart


The Trunk Group DN parameter is used by SSG to fetch the resource information like available ports, total ports etc and also to make outbound calls in case of Next Generation VXML Interpreter is used to play the IVR. The tenant name is same as TGDN.

Feedback

Comment on this article:

blog comments powered by Disqus
This page was last modified on 24 July 2017, at 02:10.