Jump to: navigation, search

_throttle_ttl_2

Section: callback
Default Value: 3600
Valid Values: Any positive integer
Changes Take Effect: Immediately


Added in: 8.5.109.05
Specifies the duration in seconds used for the callbacks limit set in _throttle_callbacks_per_service_2. A second limitation can be introduced with the options _throttle_callbacks_per_service_1 and _throttle_ttl_1. Genesys recommends using these options to prevent high rates of callback requests in a given period of time. For instance, to set a limit of 500 callbacks in 5 minutes, but not more than 1000 callbacks in 1 hour, use the following configuration:

_throttle_callbacks_per_service_1=500
_throttle_ttl_1=300
_throttle_callbacks_per_service_2=1000
_throttle_ttl_2=3600

_throttle_ttl_1

Section: callback
Default Value: 300
Valid Values: Any positive integer
Changes Take Effect: Immediately


Added in: 8.5.109.05
Specifies the duration in seconds used for the callbacks limit set in _throttle_callbacks_per_service_1. A second limitation can be introduced with the options _throttle_callbacks_per_service_2 and _throttle_ttl_2. Genesys recommends using these options to prevent high rates of callback requests in a given period of time. For instance, to set a limit of 500 callbacks in 5 minutes, but not more than 1000 callbacks in 1 hour, use the following configuration:

_throttle_callbacks_per_service_1=500
_throttle_ttl_1=300
_throttle_callbacks_per_service_2=1000
_throttle_ttl_2=3600

_booking_expiration_timeout

Section: Voice - User Originated
Default Value: 30
Valid Values: integer
Changes Take Effect: Immediately


Used to book the access number resource for a period of time. The customer needs to make the call within the specified timeout to ensure a successful match.

This option is mandatory.

Known Issues and Recommendations

Genesys Mobile Services

The Known Issues and Recommendations section is a cumulative list for all 8.5.x releases of Genesys Mobile Services. This section provides the latest information on known issues and recommendations associated with this product. It includes information on when individual items were found and, if applicable, corrected. The Resolved Issues section for each release describes the corrections and may list additional issues that were corrected without first being documented as Known Issues.


See also Internationalization Issues.



Genesys does not recommend Cassandra deployment on Windows because of potential file system performance issues. For Windows deployments of GMS, use an external Cassandra installed on Linux. If you must deploy Cassandra on Windows, contact Customer Care.


Workspace Desktop Edition 8.5.111.21 is no longer able to display the Callback Preview Interactive Notification when a callback preview is distributed by the SCXML shipped with Genesys Mobile Services (GMS) 8.5.105.05 and above.
Workaround:

  1. Unzip the Callback.zip template shipped in the GMS installation folder, under service_templates.
  2. Edit the SubAgentInvitation.scxml file.
  3. Comment out the following line:
    userEventUserData['user-data'] = attachData;
  4. Zip the template back into Callback.zip with the new version of the file.
  5. Import the edited template using Service Management UI.
ID: IW-13349 Found In: 8.5.105.05 Fixed In: 

Changes to the Campaign and CampaignCallingList lists are not visible immediately after they have been made. These changes are not visible until after GMS is restarted.

ID: GMS-6960 Found In: 8.5.203.04 Fixed In: 

The Action setting is not applied during a scheduled purge of Context Services. As a result, the purge removes all services.

ID: GMS-6944 Found In: 8.5.203.02 Fixed In: 8.5.203.04

Chat v2 messages cannot be sent to the Android sample application.

ID: GMS-6919 Found In: 8.5.203.01 Fixed In: 8.5.203.04

CHAT API V2 compatibility is broken.

ID: GMS-6939 Found In: 8.5.110.07 Fixed In: 8.5.203.04

For Firefox and Microsoft Internet Explorer users, if you increase the size of the GMS Help window in your browser, you might not be able to reduce the size using the resize arrow. Workaround: Refresh your browser.

ID: GMS-6826 Found In: 8.5.202.03 Fixed In: 

The VOICE-WAIT-USERORIG Callback does not complete with the expected FAIL_INBOUND_TIMEOUT reason after the configured _booking_expiration_timeout is expired. Instead, the Callback stays in the QUEUED state with the "Position in queue: Not in queue" reason.

ID: GMS-6591 Found In: 8.5.201.04 Fixed In: 8.5.202.03

This issue affects customers who have a Callback service configured with a capacity service and whose office is opened during the switch from standard time to DST, also known as the Spring Switch. For a period of two weeks during and after the DST switch, the availability requests submitted to this Callback service may fail with the following exception: "Unparseable date: <DST timestamp>"

ID: GMS-6480 Found In: 8.5.200.07 Fixed In: 

The log-hidden-attributes option enables on the fly in GMS Server, but disables only after restart server.

ID: GMS-6477 Found In: 8.5.202.03 Fixed In: 

After rejecting a callback, the new position in queue is not recalculated in URS, even though EWT was changed.

ID: GMS-6471 Found In: 8.5.200.07 Fixed In: 

If you create a callback service using the new service template, update manually the following option in the <your_service_name>.URS_Queueing section of your GMS application:

_urs_strategy_update_sub_routine = SetRouteDelay

This configuration is mandatory to ensure that Callback scenarios will work.

ID: GMS-5819 Found In: 8.5.110.11 Fixed In: 8.5.111.08

User-originated callbacks may stay in QUEUED state if the call does not occur within the configured _booking_expiration_timeout.

ID: GMS-5650 Found In: 8.5.111.09 Fixed In: 8.5.114.09

The _throttle_ttl_1 and _throttle_ttl_2 options are not editable in the Configured Services tab of the GMS Service Management UI. To edit these options, use Genesys Administrator Extension or Configuration Manager.

ID: GMS-5640 Found In: 8.5.111.09 Fixed In: 8.5.114.09

GMS is not able to manage several statistic references that Statistics Server groups into a single statistic event. This scenario happens when the subscribed statistics are similar or if they share the same underlying definition but have different names.

ID: GMS-5389 Found In: 8.5.110.08 Fixed In: 8.5.110.11

The VQ alias name parameter must not include spaces in EWT queries. If your VQ alias name includes spaces, you should replace spaces with underscores, which renames the alias. For example, GMS Chat VQ Multimedia Switch should be renamed GMS_Chat_VQ_Multimedia_Switch.

ID: GMS-5348 Found In: 8.5.110.07 Fixed In: 

For a callback service with the Agent Disposition dialog enabled, if the customer hangs up while the call is being transferred to an agent, the final callback status will be COMPLETED / NO_AGENT_DISPOSITION, instead of the correct value COMPLETED / ABANDONED_IN_QUEUE.

ID: GMS-5073 Found In: 8.5.109.08 Fixed In: 8.5.114.09

If the agents are registered to a switch such that the option _ixn_redirect_confirm=false is required, and the Agent Disposition dialog is enabled, and the agents reject the call when it is redirected to them, the disposition dialog is not displayed.

ID: GMS-4651 Found In: 8.5.108.02 Fixed In: 8.5.110.07

For with a callback with _userterminated_first_connect_party=AGENT and _agent_preview_via_rp=true or _agent_first_via_rp=true, the callback will not be completed properly if the selected agent rejects the call.

ID: GMS-4597 Found In: 8.5.108.02 Fixed In: 

In a multi-tenant environment, GMS might incorrectly select a media server that did not belong to the tenant configured in the service. This issue affects the Chat and Email v1 and v2 APIs.

ID: GMS-4411 Found In: 8.5.107.15 Fixed In: 8.5.107.17

In a Chat Immediate scenario, user data may be lost if the session initiates on a given ORS node and gets further processing on another ORS node.

ID: GMS-4289 Found In: 8.5.107.05 Fixed In: 8.5.109.07

When a change happens at runtime in the GMS configuration of the startup statistics, GMS closes the connections to the statistics servers and opens them again, but the startup statistics are lost and not subscribed to again.

ID: GMS-4242 Found In: 8.5.106.18 Fixed In: 8.5.107.15

GMS uses a linear strategy to manage the ORS servers set in the Connections tab of the GMS Application. The behavior is different from the circular load balancing strategy used for the ORS URL list described in the Options tab.

ID: GMS-4204 Found In: 8.5.106.18 Fixed In: 8.5.107.15

When subscribing to changes to the business attributes defined in options, GMS stops if it finds any sub-folders in these business attributes.

ID: GMS-4096 Found In: 8.5.106.16 Fixed In: 8.5.107.15

Callback filter selection using a Custom Date Range does not always work properly when you set the start and end dates to the same date or when you set an interval of 30 days between the start and end dates.

ID: GMS-4048 Found In: 8.5.106.14 Fixed In: 8.5.106.16

For user-terminated scheduled callbacks where _wait_for_agent=false, the outbound call will occur immediately after the callback service is requested. This is true for regular scheduled callbacks and for scheduled callbacks that result from the retry_later agent disposition. The workaround is to set _wait_for_agent=true for scheduled callbacks.

ID: GMS-4024 Found In: 8.5.106.14 Fixed In: 8.5.107.15

When GMS starts with external Cassandra, all of the nodes specified in the cassandra/nodes option must be up and running.

ID: GMS-4000 Found In: 8.5.106.14 Fixed In: 

In the installation wizard, if you modify the 8080 value for the HTTP and HTTPS ports in the GMS Jetty HTTP and HTTPs Port tab, you may receive the following message after GMS starts:

Unable to contact GMS on port (8080). Please check web_port option in GMS Configuration

To bypass this issue, edit the web_port and web_scheme=https options in the server section of your GMS configuration to make it match the HTTP and HTTPS values that you modified during the installation.

ID: GMS-3998 Found In: 8.5.105.16 Fixed In: 

The Service Management User Interface displays 8.5.105.14version=8.5.105.16 instead of 8.5.105.16.

ID: GMS-3993 Found In: 8.5.105.16 Fixed In: 8.5.106.16

If your HTTP Headers are missing gms_user:

  • If your application uses NGINX and you do not explicitly set underscores in headers, NGINX will silently drop HTTP headers with underscores (that are perfectly valid according to the HTTP standard). This is done in order to prevent ambiguities when mapping headers to CGI variables because both dashes and underscores are mapped to underscores during that process.
  • If your application uses Apache, gms_user headers are now silently dropped. See the workaround in the Apache official documentation.
ID: GMS-3961 Found In: 8.5.106.14 Fixed In: 8.5.107.15

The customer call will not be disconnected if the callback ends in the COMPLETED (FAIL_AGENT_CONNECT) state when the maximum number of agent connection attempts is exceeded.

ID: GMS-3950 Found In: 8.5.106.14 Fixed In: 8.5.107.15

URS versions 8.1.400.42 - 8.1.400.45 that are compatible with URS strategies version 2.63 and 2.64 always return ewt=0 regardless of the ewt calculation method. This issue is fixed in URS 8.1.400.49 which is scheduled for general availability on 06/06/2018.

ID: URS-3881 Found In: 8.5.201.04 Fixed In: 

If you set the callback service parameter named _max_transfer_to_agent_attempts to a value greater than 1, you must set the on_route_error option to try_other in your URS configuration.

If your site is operating with Call Monitoring enabled, you should disable the timer set by the _agent_transfer_confirm_timeout callback service parameter (10 seconds by default). To disable this timer, set this parameter to a large value, for example 3600. If you do not disable the timer, the timer may create some issues when interacting with the callback SCXML strategy. One way of enabling Call Monitoring is by having all agents on an internal switch with the T-Server parameter named divert-on-ringing set to false. In this example, if the timer is not disabled, it may result in the call incorrectly progressing to the agent connected state.

ID: GMS-3874 Found In: 8.5.105.14 Fixed In: 8.5.107.15

Callbacks for which _agent_preview=true will end with an error if the first agent contacted rejects the callback.

ID: GMS-3816 Found In: 8.5.105.12 Fixed In: 8.5.105.14

Enabling the ADDP protocol on a Chat Server connection may cause the following Chat Server error when the connection is closed by GMS version 8.5.105 and earlier:

error: ConnTimerQueue.cpp:131 Invalid argument 'timeout >= 0' value
ID: GMS-3815 Found In: 8.5.000.07 Fixed In: 

You cannot set a comma-separated list of ORS URLs in the _ors parameter of your GMS services. GMS supports a single URL in this parameter.

ID: GMS-3735 Found In: 8.5.105.11 Fixed In: 8.5.105.14

Callback does not take into account the Capacity service when checking the slot limit set for scheduled requests.

ID: GMS-3491 Found In: 8.5.104.04 Fixed In: 8.5.106.14

The _cb_dim_channel service request parameter is not available in the Service Management UI. However, you can pass this parameter in your Service API queries to override the WEB default value. Possible values that you can set are WEB, IVR, and MOBILE.

ID: GMS-3426 Found In: 8.5.104.04 Fixed In: 8.5.105.05

If a client application cancels a callback, the callback may be resubmitted. To avoid this issue, client applications should cancel callbacks by using the Callback API Cancel-Callback query.

ID: GMS-3384 Found In: 8.5.104.04 Fixed In: 8.5.105.05

The callback SCXML does not parse properly the option _plugin_on_dial_invoke_on_call_failed and the parsing will always result in _plugin_on_dial_invoke_on_call_failed=true. To bypass this issue and disable this feature, do not set any value for _plugin_on_dial_invoke_on_call_failed. Internally, its default value is false and will work as expected.

ID: GMS-3359 Found In: 8.5.104.01 Fixed In: 8.5.109.05

Support for Mobile Chat Application in Background is broken.

ID: GMS-3082 Found In: 8.5.103.14 Fixed In: 8.5.103.15

In a multi-site environment, the Agent Preview dialog may not be displayed after accepting a call.

ID: GMS-3077 Found In: 8.5.103.14 Fixed In: 

In agent first scenarios, the disposition dialog is displayed to the agent only if preview is enabled.

ID: GMS-3076 Found In: 8.5.103.14 Fixed In: 8.5.106.14

In some rare cases, the state of the callback service may remain QUEUED and may not change to COMPLETED although the callback is being executed.

ID: GMS-2952 Found In: 8.5.103.10 Fixed In: 

If the only configured Orchestration Server (ORS) gets down, URS deletes the virtual callback interaction in the virtual queue. Once ORS gets back up and running, the session of the deleted virtual interaction keeps running instead of failing immediately and results in the failure of a callback waiting for an agent.

ID: GMS-2945 Found In: 8.5.103.10 Fixed In: 

The _retain_session_until_ixn_deleted callback service parameter is not parsed properly and its effective value will always be true.

ID: GMS-2817 Found In: 8.5.102.29 Fixed In: 8.5.106.14

The Service Management UI presents some French Canadian translation issues.

ID: GMS-2485 Found In: 8.5.102.11 Fixed In: 8.5.103.00

The IWS Plugin for Journey Timeline does not contain any data.

ID: GMS-2484 Found In: 8.5.102.11 Fixed In: 8.5.102.12

The RAM SIZE value is not set when choosing Chat Server only.

ID: GMS-2457 Found In: 8.5.101.11 Fixed In: 8.5.102.12

When GMS is under the load of chat sessions processing, refresh operations can be blocked for these chat sessions.

ID: GMS-2346 Found In: 8.5.101.05 Fixed In: 8.5.102.12

If a user application attempts to schedule a callback outside of office hours, the callback API returns a proposal of 5-time slots within the next 24 hours. Previously, the callback API was allowing to schedule callbacks outside of office hours.

ID: GMS-2036 Found In: 8.5.006.09 Fixed In: 8.5.100.05

In the Service Management UI > on the Tools > Patterns or Tools > Resources page, a newly added resource or pattern is not saved. To work around this issue, you can save the resource or pattern in Configuration Manager.

ID: GMS-1982 Found In: 8.5.006.09 Fixed In: 8.5.100.01

In the Context Services UI, the service/state/task data in the Selection tab becomes corrupted after collapsing the Anonymous ID and Customer ID result lists with services (if Customer ID is obtained through PhoneNumber or Email filters).

ID: GMS-1935 Found In: 8.5.006.09 Fixed In: 8.5.101.02

In the Context Services UI, the search items field searches only for media_type attributes.

ID: GMS-1901 Found In: 8.5.006.09 Fixed In: 8.5.102.06

When the Context Services UI displays a large number of service elements, rendering may cause issues with performance when you create new services, states or tasks.

ID: GMS-1889 Found In: 8.5.006.09 Fixed In: 

In a scheduled callback scenario, GMS creates a service slightly prior to the scheduled time based on the configured value of _request_execution_time_buffer. When the Callback SCXML receives the service request, it performs a secondary check to ensure that the call to the customer is not made too early, which is controlled by the _desired_connect_time_threshold parameter. When this secondary check is executed and if it is determined that it is too early to proceed, the Callback SCXML waits until it is time to proceed. The side effect of this behavior is that GMS does not receive any response from Orchestration Server (ORS) and the connection times out, which can be seen in the GMS logs. To work around this issue, configure the _desired_connect_time_threshold parameter to be greater than _request_execution_time_buffer so that the secondary check does not result in a wait situation.

ID: GMS-1858 Found In: 8.5.006.09 Fixed In: 8.5.006.09

In a callback delay service (_wait_for_agent=true), if user confirmation is enabled (_wait_for_user_confirm=true), the client receives an incorrect message You will receive a call from the agent instead of the correct message We will notify you when agent is available.

ID: GMS-1857 Found In: 8.5.006.09 Fixed In: 8.5.100.05

GMS does not filter the type of chat message by channel.

ID: GMS-1839 Found In: 8.5.004.06 Fixed In: 8.5.005.08

In a callback scenario requiring user confirmation and when _on_user_confirm_timeout is set to cancel, when the user does not confirm within the _user_confirm_timeout duration, the session waits and exits after _ttl has expired instead of immediately terminating.

ID: GMS-1838 Found In: 8.5.006.09 Fixed In: 8.5.006.09

The Preview Callback plug-in for Interaction Workspace does not robustly handle a situation when the agent interacts with it very close to the dialog expiration time.

ID: GMS-1794 Found In: 8.5.005.08 Fixed In: 

The GMS Sample now correctly handles the modification of the user name. Previously, the CometD channel was not reinitialized upon user name modification and the GMS sample was no longer receiving chat messages.

ID: GMS-1768 Found In: 8.5.004.05 Fixed In: 8.5.005.08

For callback, Orchestration Server (ORS) does not route the call when a SIP Server high availability switchover occurs.

ID: GMS-1749 Found In: 8.5.005.08 Fixed In: 8.5.103.10

On Linux, when you are installing GMS where there are several network interfaces, the IP address that is selected and written into the GMS Cassandra configuration file is not always correct (it depends on the alphabetical order of the network interfaces). For example: docker0 is before eth0, so the IP address of docker0 will be written into the cassandra.yaml file. Therefore, if you have several network interfaces on the host where you are going to install GMS, check the values in your cassandra.yaml file (located in the GMS etc directory), and if needed, change the seed value, the listen_address value, and the rpc_address value.

ID: GMS-1731 Found In: 8.5.005.08 Fixed In: 8.5.005.06

When installing a GMS Cluster with a single external Cassandra, the GMSs show an exception that the storage operation cannot perform using Consistency Level 3 or 2. This is because GMS expects to have at least as many Cassandra nodes in the cluster as number of GMS instances.

ID: GMS-1693 Found In: 8.5.005.08 Fixed In: 

The chat interaction is routed to an agent only when an agent is ready for voice. When ORS sends an HTTP request to URS to start a virtual interaction and place it in the virtual queue, MediaType=chat is not specified, resulting in URS to look for available agents and ready to accept voice instead of chat.

ID: GMS-1605 Found In: 8.5.003.05 Fixed In: 8.5.004.06

With the GMS samples, messages from the client are shown twice on the sample screen, however, the GMS logs indicate that the message was sent only once.

ID: GMS-1595 Found In: 8.5.004.05 Fixed In: 8.5.005.00

When security permissions are not sufficient to allow GMS to change options in Configuration Server, the following message is displayed in the Service Management UI: Error: Server Error.

ID: GMS-1592 Found In: 8.5.004.05 Fixed In: 8.5.005.08

The Service Management UI allows a voice callback to be defined without the _callback_number parameter.

ID: GMS-1551 Found In: 8.5.004.05 Fixed In: 8.5.005.08

Between GMS versions 8.5.003.xx and GMS 8.5.004.xx, the Cassandra version was upgraded to version 2.x, and the authentication and authorization implementation changed. In GMS 8.5.003.xx, legacy Cassandra classes were used to do the wrapper between the old and new implementation for the authentication and authorization feature. In Cassandra version 2.x, authentication and authorization use keyspaces and tables (no external files). These changes cannot be used in GMS 8.5.004.xx and higher instances with embedded Cassandra. Therefore, GMS 8.5.004.xx and higher versions cannot manage authentication and authorization with embedded Cassandra.

Note: For external Cassandra, the authentication and authorization configuration is described in the GMS documentation.

ID: GMS-1539 Found In: 8.5.004.05 Fixed In: 8.5.005.05

On Windows, If you want to use a GMS cluster with the embedded Cassandra, you must set the value of the configuration option run-repair to false in the cassandra section in Configuration Manager. If you want to repair the nodes, you must use Cassandra external tools (for example, nodetool).

ID: GMS-1538 Found In: 8.5.004.05 Fixed In: 8.5.005.08

In the Service Management UI > Reporting tab > Specify Date Range, the chart is empty when viewed with Mozilla Firefox. This is caused by a recent update in Firefox. The default format that the browser accepts has changed, and because of this, the format of the date being specified by the datepicker in the Specify Date Range box does not get handled properly.

ID: GMS-1511 Found In: 8.5.003.04 Fixed In: 8.5.004.05

The scxml files that are packaged into the Callback service template, which supports the GMS Classic Call Inbound service, cause the call to be dropped. To work around this issue, updated files are available in the Classic Callback Sample Composer project that you can download from the Classic Callback Sample page. Make sure that you use these scxml files when configuring a GMS Inbound service for Classic Callback scenarios.

ID: GMS-1494 Found In: 8.5.003.02 Fixed In: 8.5.003.04

When creating or reconfiguring a User Originated Callback service using the latest Callback template, the _src_route_point parameter is set to an empty string. While routing the call to the agent, this value (empty string) is used as the source of the call, which results in a routing failure. To work around this issue, in a service configured for a User Originated scenario, either set _src_route_point to undefined, or delete the parameter through the Service Managment UI, which allows the callback application to automatically determine the value of _src_route_point.

ID: GMS-1492 Found In: 8.5.003.02 Fixed In: 8.5.003.04

When creating or reconfiguring a Chat service using the latest Callback template, the _chat_endpoint parameter is set to an empty string. This value overrides the default value set in the chat section > default_chat_endpoint option, which results in the chat being sent to an incorrect endpoint. To work around this issue, in a service configured for a Chat scenario, either set _chat_endpoint to a valid value (you can use the default value), or delete the parameter through the Service Management UI, which allows the callback application to use the default value set in the chat section > default chat endpoint option.

ID: GMS-1491 Found In: 8.5.003.02 Fixed In: 8.5.003.04

In the Service Management UI, after refreshing a page, the Home page of the UI displays instead of the refreshed page.

ID: GMS-1489 Found In: 8.5.003.02 Fixed In: 

In the Service Management UI, when deleting a resource group, the resource_available and resource_total metrics are not automatically refreshed.

ID: GMS-1480 Found In: 8.5.003.02 Fixed In: 8.5.003.04

In the Service Management UI > Reporting tab, the time range does not get reset when you specify a different report range from the current selected one.

ID: GMS-1479 Found In: 8.5.003.02 Fixed In: 8.5.003.04

In the Service Management UI, when downloading the callback reports, the reports do not have the specified target parameter so the data depicted in the report is not consistent with what is displayed in the chart.

ID: GMS-1471 Found In: 8.5.003.02 Fixed In: 8.5.004.05

In the Service Management UI, when downloading reports, the reports are generated using the server’s local timezone. If the client browser is in a different timezone than the server, the time slice depicted in the generated report can be different from the time range specified in the client browser.

ID: GMS-1466 Found In: 8.5.003.02 Fixed In: 8.5.004.05

In some cases, ORS does not correctly terminate requests from GMS and this may result in an error message being logged as a result of a timeout. This does not affect the processing of the callback request.

ID: GMS-1431 Found In: 8.5.002.02 Fixed In: 8.5.004.05

In the Service Management UI > Reporting for Callbacks, when no data is available for the Target, the select boxes become disabled and the user is not able to switch to another Stat Type, such as Agent or Agent Group, even if the latter have data.

ID: GMS-1429 Found In: 8.5.002.02 Fixed In: 8.5.003.02

In the Service Management UI, the generated reports for callback that are downloaded do not accurately depict the data that is displayed in the graph. The data represented in the graph is accurate.

ID: GMS-1428 Found In: 8.5.002.02 Fixed In: 8.5.004.05

HTTP Basic Authentication does not work for Callback services.

ID: GMS-1428 Found In: 8.5.002.02 Fixed In: 8.5.004.05

In the Service Management UI, when Reporting on Callbacks or Resources and selecting Group By Data as A day, the generated graph does not accurately group the data by day, and therefore, the data represented in the graph is not accurate.

ID: GMS-1427, GMS-1424 Found In: 8.5.002.02 Fixed In: 8.5.003.02

In the Service Management UI > Reporting tab, the graph does not accurately filter out invalid data for certain times, and instead displays an empty graph. For example, if a user is reporting on a service for which data was pushed in today but not yesterday, the graph accurately displays the data for today, but for yesterday, an empty graph displays instead of the message: No Data available for the selected time period.

ID: GMS-1419 Found In: 8.5.002.02 Fixed In: 8.5.003.02

In the Service Management UI > Reporting data for Services, generated reports that are downloaded do not accurately break-up the data as specified by the Group By Data entry that was selected. Instead, the reports group the data in slices of 15 minutes (QUARTER_HOUR).

ID: GMS-1418 Found In: 8.5.002.02 Fixed In: 8.5.004.05

From a Genesys solution point of view, the GMS HTTP Basic Authentication feature on the Service, Storage, and Notification APIs cannot be set up when using ORS-based services that need GMS DFM (Service, Storage, and Notification).

ID: GMS-1404 Found In: 8.5.001.07 Fixed In: 8.5.004.05

The default DFM files that are hosted and generated in GMS do not take into account the port restriction in the URL. To work around this issue, download the DFM files from the Service Management UI > Tools > Download DFM tab and manually modify the files.

ID: GMS-1360 Found In: 8.5.001.07 Fixed In: 

The Create storage request from the Service API incorrectly returns the UUID instead of the userdata ID using application/x-www-form-urlencoded data.

ID: GMS-1351 Found In: 8.5.001.07 Fixed In: 8.5.002.02

Chat does not work in the following configuration:

  • Single-tenant Configuration Server (tenant name is Resources, with DBID=101)
  • Multi-tenant Configuration Server, using a tenant other than Environment, with DBID distinct from 1
ID: GMS-1309, GMS-1308 Found In: 8.5.001.07 Fixed In: 8.5.001.08

In the Service Management UI > Reporting tab, the callback reports do not display data correctly in the following cases:

  • When GMS is installed in a single-tenant Configuration Server.
  • When GMS is installed in a multi-tenant Configuration Server and the assigned tenant is not Environment (DBID = 1).
ID: GMS-1239 Found In: 8.5.000.07 Fixed In: 8.5.001.07

In the Service Management UI > Tools > Resources tab, the resource_available and resource_total fields do not display an accurate count after adding or removing resources. To work around this issue, refresh the window to update the fields.

ID: GMS-1222 Found In: 8.5.000.07 Fixed In: 8.5.001.07

When creating a business-hours service through the Service Management UI, the written data for Open dates is incorrect. To workaround this issue, you can correct the date in Configuration Manager (_bh_regularX options) after the service creation. For example:
_bh_regular2="Mon 08:00 - Tue 23:00"
should be replaced with:
_bh_regular2="Mon-Tue 08:00-23:00"

ID: GMS-1132 Found In: 8.1.200.25 Fixed In: 8.5.000.07

When GMS is running on JDK 7 64-bit, you must increase allocated stack space. To do this:

  1. Open the launcher.xml file.
  2. Locate the line containing "-Xss".
  3. Increase the value from 200k to 228k (minimum).

For example:

<parameter name="jvm_option21" displayName="jvm_option21" mandatory="true" hidden="true" readOnly="true">
<description><![CDATA[Cassandra related]]></description>
<valid-description><![CDATA[]]></valid-description>
<effective-description/>
<format type="string" default="-Xss228k" />
<validation></validation> 
</parameter>
ID: GMS-1120 Found In: 8.1.200.25 Fixed In: 8.5.000.07

GMS responds with an a Internal Server Error message instead of a BadRequest message when negative notification requests are received.

ID: GMS-1101 Found In: 8.1.200.25 Fixed In:  8.5.005.08

GMS does not write any logs during the start-up process. To work around this issue, start GMS from a console, which will show a log ouput. You can then save the logs to a file.

ID: GMS-1093 Found In: 8.1.200.25 Fixed In: 8.5.004.05

Only current Daylight Savings Time (DST) is taken into account. The service is not able to project DST in the future if scheduling after summer when winter DST is still in affect, and vice-versa. To workaround this issue, set an additional parameter _timezone_offset which stands for seconds offset when comparing timezone with UTC. This parameter may be +/-, so for example 7200 is 2h (GMT+2).

ID: GMS-1039 Found In: 8.1.200.25 Fixed In: 8.5.006.09

ORS sometimes fails to start when the DFM configuration is loaded on a GMS node that is not running. To workaround this issue, use ORS version 8.1.300.10 or later.

ID: GMS-1009 Found In: 8.1.200.25 Fixed In: 8.5.000.07

The Service API incorrectly allows the user to overwrite service configuration options by passing them as request parameters. (GMS-830)

ID: GMS-830 Found In: 8.1.200.25 Fixed In: 8.5.000.07

Default values for RAM allocation may be insufficient in the launcher.xml file, causing Genesys Mobile Services to stop running unexpectedly with a "Map failed" error. To prevent this, adjust the following options in your launcher.xml file before starting the Genesys Mobile Services application:

Option Name Minimum Recommended Value
Xms 256m
Xmx 512m
ID: ER# 310704162 Found In: 8.1.100.14 Fixed In: 

After an SCXML application error response from ORS, the related HTTP connection is not released correctly.

The recommended workaround for this situation is to reduce the timeout value and increase the number of connections allowed, so that the connection can safely timeout if an error response is returned. Accomplish this by editing the Genesys Mobile Services Application object configuration setting under the GMS section of the Options table, as shown below:

Name Value
http.connection_timeout 10
http.max_connections_per_route 20
http.max_connections_total 100
http.socket_timeout 10
ID:  Found In: 8.1.000.30 Fixed In: 


Internationalization Issues

Information in this section is included for international customers. Release numbers in the Found In and Fixed In fields refer to the English (US) release of Genesys Mobile Services unless otherwise noted in the issue description.


There are no internationalization issues for this product.


Feedback

Comment on this article:

blog comments powered by Disqus
This page was last modified on September 5, 2018, at 07:47.