Jump to: navigation, search

Managing T-Server

This section describes how to configure, install, and start/stop T-Server for Skype for Business.

Configuring T-Server

  1. Using Genesys Administrator (or Configuration Manager), create an Application object of type T-Server in accordance with the procedure for server-type applications as described in the Management Framework Deployment Guide.
  2. On the Connections tab, add a SIP Server application to which this T-Server must connect. You can leave the default values for other fields.
  3. On the Options tab, configure common T-Server options that manage licensing and logging. (Sections [license] and [log].) See Configuration Options.
  4. Configure T-Server options in the [TServer] section:
    link-n-name—Mandatory option. This option defines the name of the section where you configure connection parameters for T-Server and Connector, where n is a consecutive number for a Connector—for example, link-1-name=connector1.
    • Create a section with the name specified by the link-n-name option—for example, [connector1].
    • In the section dedicated to the Connector—for example, [connector1]—specify the following options:
      • hostname—Set to the host name where this Connector runs.
      • port—Set to the port number of this Connector.
      • protocol—Set to tcp, the transport protocol to be used between T-Server and this Connector.
    Configuration example for a single Connector:
    [TServer]
    link-1-name=connector1
    [connector1]
    hostname=computer1.lyncdco.lab
    port=9001
    protocol=tcp

    Configuration example for three Connectors:
    [TServer]
    link-1-name=connector1
    link-2-name=connector2
    link-3-name=connector3
    [connector1]
    hostname=computer1.lyncdco.com
    port=9001
    protocol=tcp
    [connector2]
    hostname= computer2.lyncdco.com
    port=9001
    protocol=tcp
    [connector3]
    hostname= computer3.lyncdco.com
    port=9001
    protocol=tcp
  5. Configure the following configuration options in the [extrouter] section:
    • cast-type = route pullback
    • use-data-from = current
    • event-propagation = list

Other configuration options enable or disable supported T-Server functionality.
See Configuration Options for option descriptions. See Multi-Site Support for information about multi-site functionality. See High Availability for information about the High Availability configuration.

Installing T-Server

Prerequisites: T-Server Application object is created in the Genesys configuration environment.

  1. In the directory to which the T-Server installation package was copied, locate and double-click Setup.exe to start the installation.
  2. When prompted, specify the connection parameters to the Configuration Server associated with this T-Server.
  3. When prompted, select the T-Server Application object you configured in Configuring T-Server from the list of applications.
  4. Specify the license information that T-Server is to use: either the full path to, and the name of, the license file, or the license server parameters.
  5. Specify the destination directory into which T-Server is to be installed.
  6. Click Install to begin the installation.
  7. Click Finish to complete the installation.

By default, T-Server is installed as a Genesys service (Windows Services) with Automatic startup type.

Starting T-Server

Before starting T-Server, be sure that the following components are running:

  • Configuration Server
  • License Manager

You can start and stop Framework components using the Management Layer, a startup file, a manual procedure, or the Windows Services Manager. With all these methods, command-line parameters are usually required for a server application in addition to an executable file name.

Starting T-Server on Windows manually

Start T-Server from either the Start menu or the MS-DOS window. If you use the MS-DOS window, go to the directory where T-Server is installed, and type the following command-line parameters:

mslync_server.exe -host <Configuration Server host> -port <Configuration Server port> -app <T-Server Application> -l <license address> -nco [X]/[Y]


For starting server applications using the Management Layer or the Windows Services Manager, see Starting and Stopping Framework Components in the Management Framework Deployment Guide.

Stopping T-Server

To stop a server application on Windows, do one of the following:

  • Type Ctrl+C in the application's console window.
  • Click End Task in the Windows Task Manager.

For stopping server applications using the Management Layer or the Windows Services Manager, see Starting and Stopping Framework Components in the Management Framework Deployment Guide.

Configuration Options


Back to Deployment Summary

Feedback

Comment on this article:

blog comments powered by Disqus
This page was last modified on April 4, 2018, at 14:50.