Jump to: navigation, search

Local Control Agent (LCA)

To enable the Management Layer to control the startup and status of applications and solutions, and manage application failures, you must install an instance of Local Control Agent on every computer that is to run either Genesys server applications or third-party server applications you want to control with Management Layer.

Notes on Configuring the LCA Port

  • The LCA port must be set to a value of 2000 or greater. When the LCA port is specified within the range of 1-1999, LCA starts on port number 4999 (default value).
  • If the LCA port value is changed in the Host configuration while Solution Control Server (SCS) is connected to LCA, SCS does not disconnect from and reconnect to LCA; instead, the new LCA port value takes effect after LCA restarts.
  • If you change the LCA port value for the LCA installed as a Windows Service, you must also change the LCA port number in the LCA startup parameters in the Registry Editor. The LCA Registry Key is located at:
       HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\<lca_service_name>\ImagePath
    The value must have the following format:

       <full path>\lca.exe <LCA port number> -service <lca_service_name>

    Change the LCA port number to the current value.

Installing Local Control Agent

Important
All running LCA processes must be stopped before installing another LCA.

  1. Stop all LCA processes that are running. If there are any LCA processes that are running when you begin the installation, the installation process will stop, and not restart until you have stopped those processes (see Step 4).
  2. On the Management Framework product CD in the appropriate management_layer/lca/<operating_system> directory, locate a shell script called install.sh.
  3. Type the file name at the command prompt, and press Enter.
  4. Type Enter. This action will have one of the two following results.
    • If there are any LCA processes still running, you must exit from the installation and have to stop these processes before you can restart it.
    • Otherwise, you continue with the installation.
  5. To specify the hostname for this LCA, do one of the following:
    • Type the name of the host, and press Enter.
    • Press Enter to select the current host.
  6. Enter the Configuration Server host name, and press Enter.
  7. Enter the Configuration Server network port, and press Enter.
  8. Enter the Configuration Server user name, and press Enter.
  9. Enter the Configuration Server password, and press Enter.
  10. To specify the destination directory, do one of the following:
    • Press Enter to accept the default.
    • Enter the full path of the directory, and press Enter.
  11. If the target installation directory has files in it, do one of the following:
    • Type 1 to back up all the files in the directory, and press Enter. Then specify the path to which you want the files backed up, and press Enter.
    • Type 2 to overwrite only the files in this installation package, and press Enter. Then type y to confirm your selection, and press Enter. Use this option only if the application already installed operates properly.
    • Type 3 to erase all files in this directory before continuing with the installation, and press Enter. Then type y to confirm your selection, and press Enter.
    The list of file names will appear on the screen as the files are copied to the destination directory.
  12. For the product version to install, do one of the following:
    • Type 32 to select the 32-bit version, and press Enter.
    • Type 64 to select the 64-bit version, and press Enter.
  13. If you are authorized to modify startup (RC) files, you are prompted to add LCA to the startup files. Do one of the following:
    • Press Enter to add LCA to the startup files.
    • Type n to leave LCA out of the startup files, and press Enter.
      Important
      On UNIX systems, LCA 8.1.0 and earlier is installed with the autostart capability created automatically for run level 3. If you are using another run level, you must modify your operating system startup scripts by adding the startup of LCA.

  1. Stop all LCA processes that are running.
  2. On the Management Framework product CD in the appropriate management_layer\lca\windows directory, locate and double-click setup.exe to start the Genesys Installation Wizard.
  3. Use the About button on the wizard's Welcome page to view the read_me file. The file also contains a link to the server's Release Notes file.
  4. Click Next to start the installation.
  5. On the Connection Parameters to the Genesys Configuration Server page, specify the host name, port, user name, and password for Configuration Server, and then click Next.
  6. On the Choose Destination Location page, the wizard displays the default folder C:\Program Files\GCTI\Local Control Agent.
    If necessary, do one of the following:
    • Click Browse to select another destination folder.
    • Click Default to reinstate the default folder, C:\Program Files\GCTI\Local Control Agent.
  7. On the Ready to Install page, do one of the following:
    • Click Back to update any installation information.
    • Click Install to proceed with the installation.
  8. On the Installation Complete page, click Finish.

As a result of the installation, the wizard adds Application icons to the:

  • Windows Start menu, under Programs > Genesys Solutions > Management Layer.
  • Windows Add or Remove Programs window, as a Genesys server.
  • Windows Services list, as a Genesys service, with Automatic startup type.
Important
Because the Management Layer functionality requires LCA to be always running while its host computer is up, LCA is installed as a Windows Service with the autostart capability.

LCA Log Options

Local Control Agent supports the unified set of log options (common log options) to allow precise configuration of log output. For a complete list of unified log options and their descriptions, see the "Common Log Options" section of the Framework Configuration Options Reference Manual.

If you do not specify any log options for LCA, the default values apply. To specify log options for LCA, modify the lca.cfg configuration file that was created during LCA deployment, and is located in the same directory as the LCA executable. The LCA configuration file has the following format:

[log]
<log option name> = <log option value>
<log option name> = <log option value>
...

A sample LCA configuration file is available in the Framework Configuration Options Reference Manual.

Configuring ADDP Between Solution Control Server and Local Control Agent

Advanced Disconnection Detection Protocol (ADDP) is enabled automatically between Solution Control Server (SCS) and LCA. By default, SCS generates polling messages to LCA. If SCS does not receive messages from LCA within this interval, SCS sends a polling message. A lack of response to the polling message from LCA within the same time period is interpreted as a loss of connection.

If you want to change the ADDP timeout between SCS and LCA, configure the addp-timeout option. If you also want to enable LCA polling messages to SCS, configure the addp-remote-timeout option. Both of these options are set in the annex of the Host object configured for the computer on which LCA runs. For detailed instructions on specifying these options, refer to the Framework Configuration Options Reference Manual.

To avoid false disconnect states that might occur because of delays in the data network, Genesys recommends setting the ADDP timeouts to values equal to or greater than ten seconds.

For more information about ADDP, see Advanced Disconnection Detection Protocol.

Retrieved from "https://docs.genesys.com/Documentation:FR:Dep:DepLCA:Current (2019-08-25 08:27:13)"
This page was last modified on January 31, 2019, at 10:02.

Feedback

Comment on this article:

blog comments powered by Disqus