Jump to: navigation, search

http Section

Important
From release 8.1.512.08 forward, the functionality enabled by the options in this section is no longer supported.

This is a user-configurable section. You can choose any name for this section, provided that it matches the name that you specify for an option in the [listeners] section. Use the options described below to set parameters for this connection.

Example:

[http-9090]

port=9090

transport=tcp

protocol=http




  


port

Default Value: No default value
Valid Values: Any integer in the range of 1 to 65535
Changes Take Effect: After restart


Note: From release 8.1.512.08 forward, the functionality enabled by this option is no longer supported.

Specifies the number of the port that ICON opens for HTTP listening.

Warning: The value for the port option must not coincide with the ICON Application object communication port that is opened for client connections.

protocol

Default Value: sip
Valid Values: http, sip
Changes Take Effect: Immediately


Note: From release 8.1.512.08 forward, the functionality enabled by this option is no longer supported.

Specifies the application-level protocol for the configured listener. Change the value to http to enable access to interfaces that are exposed through HTTP in ICON and that display performance counters.

Note: The HTTP interface is not available by default.

transport

Default Value: TCP
Valid Values: TCP (Transmission Control Protocol)
Changes Take Effect: Immediately


Note: From release 8.1.512.08 forward, the functionality enabled by this option is no longer supported.

Specifies the transport layer protocol for the connection between ICON and its client.

Feedback

Comment on this article:

blog comments powered by Disqus
This page was last modified on November 30, 2017, at 12:47.