TRouteType

Syntax

typedef enum {
	RouteTypeUnknown,
	RouteTypeDefault,
	RouteTypeLabel,
	RouteTypeOverwriteDNIS,
	RouteTypeDDD,
	RouteTypeIDDD,
	RouteTypeDirect,
	RouteTypeReject,
	RouteTypeAnnouncement,
	RouteTypePostFeature,
	RouteTypeDirectAgent,
	RouteTypePriority,
	RouteTypeDirectPriority
	RouteTypeAgentID
	RouteTypeCallDisconnect
	RouteTypeIDMAX
} TRouteType;

Values

• RouteTypeUnknown — Route type is unknown.
• RouteTypeDefault — Routing should be performed according to configuration preset by the switch.

Important

The routing application instructs T-Server to route the call to a selected target DN. If the selected target DN is empty, T-Server may instruct the switch to route the call to the default target defined by the switch.

• RouteTypeLabel — Routing should be performed according to the switch-specific label.
• RouteTypeOverwriteDNIS — The original DNIS is requested to be overwritten with the number specified by the parameter dnis.
• RouteTypeDDD — Route to the domestic (in-country) number specified by the parameter destination.
• RouteTypeIDDD — Route to the international number specified by the parameter destination.
• RouteTypeDirect — Reserved.
• RouteTypeReject — The request for routing has been rejected.
• RouteTypeAnnouncement — Specific to an AT&T Network.
• RouteTypePostFeature — Specific to an AT&T Network.
• RouteTypeDirectAgent — Route to the specific agent number specified by the parameter destination (specific to the Avaya Communication Manager).
• RouteTypePriority — Routing should be performed according to configuration for calls that have priority feature preset by the switch (specific to the Avaya Communication Manager).
• RouteTypeDirectPriority — Routing should be performed to the specific agent number specified by the parameter destination according to configuration for calls that have priority feature preset by the switch (specific to the Avaya Communication Manager).
• RouteTypeAgentID — Routing should be performed to the agent specified by the parameter AgentID.
• RouteTypeCallDisconnect — Call is to be released from the route point using the CTI link.
• RouteTypeIDMAX — See comments in the TMessageType entry.