Jump to: navigation, search

Related Configuration Options

The following configuration options control the unregistered DNs:

accept-dn-type

Default Value: +acdqueue +announcement +data +extension +position +routedn +routequeue +trunk +voicemail
Valid Values:
+/-acdqueue—Accepts or rejects registration on DN of type ACD Queue (AddressTypeQueue)
+/-announcement—Accepts or rejects registration on DN of type Music Port (AddressTypeAnnouncement)
+/-data—Accepts or rejects registration on DN of type Modem (AddressTypeDataChannel)
+/-extension—Accepts or rejects registration on DN of type Extension (AddressTypeDN)
+/-position—Accepts or rejects registration on DN of type Position (AddressTypePosition)
+/-routedn—Accepts or rejects registration on DN of type Routing Point (AddressTypeRouteDN)
+/-routequeue—Accepts or rejects registration on DN of type Route Queue (AddressTypeRouteQueue)
+/-trunk—Accepts or rejects registration on DN of type trunk or tie line (AddressTypeTrunk)
+/-voicemail—Accepts or rejects registration on DN of type Voice Mail (AddressTypeVoiceChannel)
Changes Take Effect: Immediately

Defines the supported set of device types that are not configured in the Configuration Layer, but that T-Server can register.

Note: All possible values are listed here, however, this set is T-Server specific.


acd-position

Default Value: 0 (zero)
Valid Value: Switch-specific types for DN of type ACD Position supported by T-Server
Changes Take Effect: Immediately

Defines the switch-specific type that T-Server uses for registration of DNs of type ACD Position (AddressTypePosition) that are not configured in the Configuration Layer.


acd-queue

Default Value: 0 (zero)
Valid Value: Switch-specific types for DN of type ACD Queue supported by T-Server
Changes Take Effect: Immediately

Defines the switch-specific type that T-Server uses for registration of DNs of type ACD Queue (AddressTypeQueue) that are not configured in the Configuration Layer.


data

Default Value: 0 (zero)
Valid Value: Switch-specific types for DN of type Data Channel (Modem in the configuration environment) supported by T-Server
Changes Take Effect: Immediately

Defines the switch-specific type that T-Server uses for registration of DNs of type Modem (AddressTypeDataChannel) that are not configured in the Configuration Layer.


default-dn-type

Default Value: none, extension, position
Valid Values:

  • acdqueue—T-Server uses the AddressTypeQueue value
  • announcement—T-Server uses the AddressTypeAnnouncement value
  • data—T-Server uses the AddressTypeDataChannel value
  • extension—T-Server uses the AddressTypeDN value
  • none—T-Server assigns the DN type using the PBX-provided information
  • position—T-Server uses the AddressTypePosition value
  • trunk—T-Server uses the AddressTypeTrunk value
  • voicemail—T-Server uses the AddressTypeVoiceChannel value

Changes Take Effect: Immediately

Defines the value that T-Server applies for the AttributeAddressType attribute when the client does not provide it or provides the value, AddressTypeUnknown, instead.

Note: All possible values are listed here, however, this set is T-Server specific.


dn-del-mode

Default Value:idle
Valid Values: never, idle, force, Timeout Value Format

  • never—T-Server does not unregister the DN with the PBX and the device-related information is never deleted from the T-Server memory.
  • idle—T-Server unregisters the DN with the PBX and the device-related information is deleted from the T-Server memory as soon as there are no more calls on this device.
  • force—T-Server unregisters the DN with the PBX and the device-related information is deleted from the T-Server memory regardless of whether any calls exist on that DN.
  • Timeout Value Format—T-Server applies a defined delay before unregistering the DN after the last call has left that DN. The valid value, idle is equivalent to setting the Timeout Value to 0 (zero).

Changes Take Effect: Immediately

Defines how T-Server handles device and device-related information when the DN is not configured in the Configuration Layer and there are no clients registered on that DN.

extension

Default Value: 0 (zero)
Valid Value: Switch-specific types for DN of type Extension supported by T-Server
Changes Take Effect: Immediately

Defines the switch-specific type that T-Server uses for registration of DNs of type Extension (AddressTypeDN) that are not configured in the Configuration Layer.


music

Default Value: 0 (zero)
Valid Value: Switch-specific types for DN of type Music Port supported by T-Server
Changes Take Effect: Immediately

Defines the switch-specific type that T-Server uses for registration of DNs of type Music Port (AddressTypeAnnouncement) that are not configured in the Configuration Layer.


reg-delay

Default Value: 1000 milliseconds
Valid Values: 0-5000
Changes Take Effect: Immediately

Defines the time (in milliseconds) that T-Server waits for the DN Created notification from Configuration Server before it starts processing the registration request from the client as a request for a DN not configured in the Configuration Layer.

reg-silent

Default Value: true
Valid Values: true, false
Changes Take Effect: Immediately

  • If this option is set to a value of true, T-Server reports EventRegistered for on-demand registration with the PBX when the procedure is completed.
  • If this option is set to a value of false, T-Server reports EventRegistered as early as possible during the PBX registration procedure.

routing-point

Default Value: 0 (zero)
Valid Value: Switch-specific types for DN of type Routing Point supported by T-Server
Changes Take Effect: Immediately

Defines the switch-specific type that T-Server uses for registration of DNs of type Routing Point (AddressTypeRouteDN) that are not configured in the Configuration Layer.


routing-queue

Default Value: 0 (zero)
Valid Value: Switch-specific types for DN of type Routing Queue supported by T-Server
Changes Take Effect: Immediately

Defines the switch-specific type that T-Server uses for registration of DNs of type Routing Queue (AddressTypeRouteQueue) that are not configured in the Configuration Layer.


trunk

Default Value: 0 (zero)
Valid Value: Switch-specific types for DN of type Routing Point supported by T-Server
Changes Take Effect: Immediately

Defines the switch-specific type that T-Server uses for registration of DNs of type Trunk or Tie Line (AddressTypeTrunk) that are not configured in the Configuration Layer.


voicemail

Default Value: 0 (zero)
Valid Value: Switch-specific types for DN of type Voice Mail supported by T-Server
Changes Take Effect: Immediately

Defines the switch-specific type that T-Server uses for registration of DNs of type Voice Mail (AddressTypeVoiceChannel) that are not configured in the Configuration Layer.


This page was last edited on June 12, 2013, at 22:08.
Comments or questions about this documentation? Contact us for support!