Jump to: navigation, search

Audio Tones Configuration

The following sections outline the general configuration for audio tones.


Media Server

The following table describes the options required for audio tones when using Media Server:

Section Name Parameter Name Description
Conference record_recorddnhearstone Specifies whether the RecordDN (Party A) hears the repeating tone.
Conference record_otherdnhearstone Specifies whether the OtherDN (Party B) hears the repeating tone.

Media Server allows you to configure whether the recording gets the audio tone as well. When the audio tone is injected into the call, Media Server distinguishes between what the participant hears and what the participant says. The above two configuration parameters affect what the participant hears.


Section Name Parameter Name Description
Conference record_chan2source Specifies the recorded media that represents the first participant (Record DN) in the recording session.
  • recorddnsays
  • otherdnhears

If the Other DN is configured to receive consent and you want the consent to be recorded, set the value to otherdnhear.

Conference record_otherdnhearstone Specifies the recorded media that represents the second participant (Other DN) in the recording session.
  • otherdnsays
  • recorddnhears

If the Record DN is configured to receive consent and you want the consent to be recorded, set the value to recorddnhear.

This page was last edited on October 2, 2019, at 19:20.
Comments or questions about this documentation? Contact us for support!