Jump to: navigation, search


Section: settings
Default Value: 0
Valid Values: Any integer from 0-7000
Changes Take Effect: Immediately

Specifies the number of characters from the whole client message that the log prints, starting from the beginning of the message.


Section: settings
Default Value: true
Valid Values: true, false
Changes Take Effect: Immediately

Prohibits or allows the printing of (attached) user data in the log output. A value of true prohibits printing.

Deploying a Chat Solution

This page outlines the essential steps of deploying a Chat Solution.


To deploy Chat Server, perform the following steps:

  • Create a Chat Server application in configuration. Make sure that the following configuration is specified correctly:
    • Ports. At least 3 ports must be configured with the following IDs: default, webapi and ESP. Additionally, if KPI must be exposed via REST API, port with ID health must be added.
    • Connections. Chat Server must be connected to Interaction Server and UCS, and optionally Chat Server could be connected to the Configuration Server application (usually confserv) and Message Server. Setting addp is recommended for all these connections.
    • Endpoints. The endpoints:*tenant_dbid* section must be renamed to contain an appropriate tenant ID value (for example endpoints:1) and the default option must be initialized with a queue name (to which Chat Server will submit interactions).
    • Logs. By default logs are configured to hide all possible sensitive data - which however might not be convenient if troubleshooting is required. Decide on how you want to set the hide-attached-data and message-log-print-size options in the settings section and options in the log-filter-data section.
    • Set up Chat Server High Availability configuration if needed.
    • Connect other applications to the Chat Server application:
      • Interaction Server must be connected to the ESP port (addp is recommended for this connection).
      • GMS must be connected to the webapi port (addp is not recommended for this connection due to short living nature of these connections).
  • Install the Chat Server installation package (IP).
  • Configure other applications to work with chat channels:
    • Create/modify capacity rule to include the chat media type.
    • Create/modify workflow (using either IR Designer or Composer) to route a chat interaction. For information about sending messages to a chat session refer to How to Send Message or Notice to Chat Session from Workflow.
    • Enable GMS to provide chat API (by adding the chat.customer-support section).
    • Configure agents (persons in configuration) with a chat channel access.
    • Adjust configuration of Workspace (agent desktop) if needed. For WDE review the chat.* and chatserver.* options and for the openmedia.workitem-channels option add the chat value.

Interaction Server Cluster Support

Please refer to Interaction Server Cluster documentation (in particular, review Special Considerations for Media Servers in Suggested Deployment Configuration) in order to configure Chat Server to work with Interaction Server Cluster.

The ESP Configuration Must Be Symmetrical section means that in order to be able to send ESP messages from workflow to Chat Server using Interaction Server Cluster, each Interaction Server node in the cluster must have its own connection to ESP port of Chat Server.
This page was last modified on January 24, 2017, at 15:11.


Comment on this article:

blog comments powered by Disqus