Genesys Voice Platform 8.5 Product Alerts
Media Control Platform (MCP) v8.5.178.xx does not reuse the SIP request’s TCP connection when responding to the request. Subsequently, MCP tries to initiate a new TCP connection to the FQDN or IP (and port) present in the VIA header of the request.
As a result, MCP might fail to send a SIP response to the request if the remote doesn't accept a new TCP connection. For example, the remote is a F5 load balancer or Genesys Composer.
If you have installed MCP v8.5.178.xx, Genesys recommends you uninstall this version and install/upgrade to MCP v184.108.40.206 or a later version.
Reporting Server aggregated reports (data) do not maintain time zone information because, as designed, report generation uses the time zone format used by the host on which Reporting Server is installed. For consistent reports, Genesys recommends that you locate the Reporting Server, Genesys Administrator, and Genesys Administrator UI in the same time zone.
Resource Manager (RM) v220.127.116.11 does not reuse the SIP request’s TCP connection when responding to the request. Subsequently, RM tries to initiate a new TCP connection to the FQDN or IP (and port) present in the VIA header of the request.
As a result, RM might fail to send a response to the request if the FQDN cannot be resolved. If the request happens to be a SIP OPTIONS request, then SIP can put RM out of service. (GVP-24000)
If you have downloaded RM v18.104.22.168, Genesys recommends you uninstall this version and reinstall RM v22.214.171.124.
Starting from Media Control Platform (MCP) 8.5.176.xx and Resource Manager (RM) 8.5.175.xx, the default value for SIP TLS communications for various interfaces has been changed to TLSv1_2. Setting TLSv1_2 as default value avoids the security issues associated with the SSLv23 which allowed MCP and RM to downgrade to the vulnerable SSLv2 and SSLv3 protocols.
This means that when using the default configuration, the new MCP 8.5.176.xx and RM 8.5.175.xx versions and above will not support any protocols lower than TLSv1_2 for SIP TLS communications.
- In scenarios where MCP or RM communicates with other components that support TLSv1 or TLSv1_1 protocols, the default configuration parameters corresponding to those SIP TLS interfaces on MCP or RM must be changed appropriately.
- If only one MCP or RM is upgraded to the latest version, then modify the default configuration for both the MCP and RM to use TLSv1 to support interfacing with other MCPs and RMs running in older versions.
Upgrading the Resource Manager to 126.96.36.199 might cause conferencing issues in the Media Control Platform. Workaround: Upgrade the Media Control Platform to 188.8.131.52 or higher versions. Or, configure the gvp.policy.voicexml-recording-allowed option to false in the tenant properties, to disable the IVR recording functionality.
VP Reporting Plugin for GAX versions 184.108.40.206 and 220.127.116.11 may not generate Call Peaks Report appropriately. Genesys recommends that customers use this feature in a lower version of the software until an appropriate resolution is provided for this issue. The latest version for this plugin is 18.104.22.168.
The Media Server DVD for the 17 April 2015 release of GVP 8.5.1 is missing the VP Reporting Plugin for GAX 22.214.171.124 in the Linux Installation Package (IP). That omission will be corrected soon; until then you can download the Linux IP through Genesys software download.
Deploy with GAX, not with GA: IMPORTANT! Functionality for deploying Genesys Voice Platform components to remote and local hosts has been discontinued in Genesys Administrator as of version 8.1.303. This functionality is now available in Genesys Administrator Extension; please refer to documentation for Genesys Administrator Extension for details.
Optimize Red Hat Enterprise Linux Performance Tip: GVP 8.1.7 and above support Red Hat Enterprise Linux (RHEL) 6. However, GVP components run at lower capacities on RHEL 6.x, as compared to RHEL 5.x when using ext4. Thus, expect the best performance from GVP while using RHEL 5, or using RHEL 6 with ext3.
Customers using the VP Reporting Plugin for GAX (version 126.96.36.199 or lower) should not upgrade to GAX version 188.8.131.52—this combination has not been qualified.
MCP releases 184.108.40.206, 220.127.116.11, and 18.104.22.168 consume excessive memory during Third Party Recording. Other recording configurations, such as MSML GIR recording, are not impacted. This behavior is scheduled to be corrected in the next release of GVP 8.5.1, scheduled for 9 September 2015.
MCP now correctly interprets the specification RFC2616 and does not revalidate an HTTP response that contains a “must-revalidate” directive until it has become “stale”(expired).
To achieve the previous behavior (revalidate any response that contains a “must-revalidate” directive) with the version 8.5.1 MCP IP (18 December 2015 and later), configure your application servers/web servers to return the following directives with each HTTP response that requires immediate revalidation:
Cache-Control: max-age=0 and must-revalidate
A memory growth issue discovered in Resource Manager 22.214.171.124 was fixed in Resource Manager version 126.96.36.199. Previously, Resource Manager memory grew excessively when connected to SNMP Master Agent.
Correction: The initial IP ReadMe for components incorrectly stated that GVP 8.5.0 supports 32-bit RHEL 6.
All GVP 8.x versions support live upgrades, in-service migration, and mixed modes.
GVP 8.x HTTP Digest Authentication, for the Conversation Manager Solution.
The GVP User Interface (GVPUI) in Genesys Administrator provides scaling options for multi-site reporting by aggregating reports from multiple independent Reporting Servers, allowing administrators to view an aggregation of data across multiple sites.
For optimal performance, Genesys recommends a maximum number of 750 tenants per multi-tenant deployment.
Genesys recommends using static IP addresses for all GVP machines running Windows or Linux.
Sometimes while using Genesys Interaction Recording (GIR), you may see a message similar to Recv failure: Connection was reset in MCP logs when you try to post recording files to Amazon S3, and fail. Workaround: Configure the MCP configuration parameter [fm].http_proxy to be empty (containing no value), to disable SQUID/proxy server caching. (GVP-20940)
If a child tenant is assigned a Logical Resource Group (LRG) by its parent tenant, and then is moved within the hierarchy, the LRG remains assigned until the assignment is manually removed. (ER# 247518907)
In multi-tenant deployments, child tenant users must be given logon access to Genesys Administrator before they can view and download their reporting data. You can grant access to child tenants by completing the following tasks, the procedures for which can be found in Framework 8.0 Genesys Administrator Help:
- Create a new tenant by using the Manually Creating New Tenants procedure. You can view the newly created tenant, in the provisioning > Environment > Tenants panel. If you do not see the new tenant immediately, log out and log back in again.
- Create a new user by using the Creating Users procedure.
- Add the new user to a group by using the Add Users by Using the Task Panel procedure.
- Create a new role, add the new user to the role, and assign permissions by using the information in the Users: Overview section.
- Select Environment > Applications, double-click the default application, and grant Read and Write permissions to the user.
- Log out of Genesys Administrator, then log in again as the new user.
In some instances, the Media Server might not be able to play prompts on Linux. To work around this issue, add the machine’s IP address to the /etc/hosts file, and then restart the Media Control Platform. For example:
127.0.0.1 localhost localdomain.localhost
188.8.131.52 machine1.domain.com machine1
Voice Platform Resource Manager Release Notes
|Release Date||Release Type||Restrictions||AIX||Linux||Solaris||Windows|
This release contains the following new features and enhancements:
- Resource Manager (RM) now uses OpenSSL libraries version 1.0.2j. RM supports these versions of Transport Layer Security (TLS): TLSv1.2, TLSv1.1, and TLSv1; and these versions of Secure Sockets Layer (SSL): SSLv2, SSLv3, and SSLv23.
- The following configuration options support the versions of TLS and SSL listed above:
- proxy.sip.transport.<n> type = (default is TLSv1_2)
- registrar.sip.transport.<n> type = (default is TLSv1_2)
- monitor.sip.transport.<n> type = (default is TLSv1_2)
- subscription.sip.transport.<n> type = (default is TLSv1_2)
- Note: Please refer to the 8.5 Product Alerts before upgrading RM to this version.
- RM now checks the write permission of the directory in which the SQLite DB file will be created and does not start if the DB file fails to open.
- You can now override the policy setting for IVR recording by enabling a new configuration option voicexml-recording-allowed in the [rm] section of the Resource Manager application.
- When set to true (the default), RM enables the IVR recording, provided the relevant tenant or IVR Profile policy options are also enabled appropriately.
- When set to false, RM disables the IVR recording, although the relevant tenant or IVR Profile policy options are enabled.
This release contains the following resolved issues:
RM no longer terminates abnormally when its recorder UserAgent receives the non-REGISTER SIP requests with wrong transports in the VIA header. (GVP-23525)
RM no longer enters into an unresponsive state when the Configuration Server switches from primary to backup or vice-versa. (GVP-23454)
RM now clears the Call data properly for a recording call leg when the corresponding resource (recordingclient, recordingserver) goes offline. (GVP-23412)
RM now retries another MCP for a call within the Logical Resource Group when RM switches from the treatment service to use the MSML service. (GVP-23378)
When using SIP Secure, the RM no longer terminates abnormally. Also, the issue of calls getting dropped is now resolved. (GVP-23562)
No special procedure is required to upgrade to release 184.108.40.206.