GIR-GVP Port Capacity Test Results Summary
Criteria
System Port Capacity is the maximum number of ports (Port Density or PD) or rate (Call Arrivals Per Second or CAPS) that a GIR-GVP system can handle; this number must maximize the usage of hardware resources, while maintaining all criteria within the predefined threshold.
Because CPU usage is the usual deciding factor for peak port capacity, this section presents results that correlate to CPU usage (and other criteria such jitter buffer and max delta from sample recordings) to track the quality of recording.
The following criteria are required for an installation to reach the 95th percentile of quality analysis, from a sample RTP stream:
- Packet Loss <= 1%
- Max Jitter Buffer <= 30ms
- Max Delta <= 200ms
Summary of Performance Testing Results
Table 3: GIR-GVP Port Capacity on Physical Servers
| Test Profiles | HW profile | OS | Peak Ports | Comment |
| SW Profile 1 (32 Kbps bit rate) | HW Profile 1 | Windows 2008 R2 x64 | 200 (preferred) | |
| SW Profile 1 (32 Kbps bit rate) | HW Profile 1 | Windows 2008 R2 x64 | 220 (peak) | If some of audio quality criteria can be ignored or waived. |
| SW Profile 1a (16 Kbps bit rate) | HW Profile 1 | Windows 2008 R2 x64 | 240 (preferred) | |
| SW Profile 1a (16 Kbps bit rate) | HW Profile 1 | Windows 2008 R2 x64 | 270 (peak) | If some of audio quality criteria can be ignored or waived. |
| SW Profile 1a (16 Kbps bit rate) | HW Profile 6 | Windows 2008 R2 x64 | 350 (preferred) | 8 Dispatchers (= # of cores) |
| SW Profile 1a (16 Kbps bit rate) | HW Profile 6 | Windows 2008 R2 x64 | 450 (peak) | If some of audio quality criteria can be ignored or waived. 8 Dispatchers (= # of cores) |
| SW Profile 1b (8 Kbps bit rate Mono) | HW Profile 6 | Windows 2008 R2 x64 | 450 (preferred) | 8 Dispatchers (= # of cores) |
| SW Profile 1b Profile 1b (8 Kbps bit rate Mono) | HW Profile 6 | Windows 2008 R2 x64 | 600 (peak) | If some of audio quality criteria can be ignored or waived. 8 Dispatchers (= # of cores) |
| SW Profile 3a (16 Kbps bit rate) | HW Profile 1 | Windows 2008 R2 x64 | 210 (preferred) | |
| SW Profile 3 (16 Kbps bit rate) | HW Profile 1 | Windows 2008 R2 x64 | 270 (peak) | If some of audio quality criteria can be ignored or waived. |
| SW Profile 1(32 Kbps bit rate) | HW Profile 3 | Windows 2008 R2 x64 | 240 (preferred) | |
| SW Profile 1 (32 Kbps bit rate) | HW Profile 3 | Windows 2008 R2 x64 | 360 (peak) | If some of audio quality criteria can be ignored or waived. |
| SW Profile 1a (16 Kbps bit rate) | HW Profile 1 | RedHat EL 6.5 x64 | 150 (preferred) | |
| SW Profile 1a (16 Kbps bit rate) | HW Profile 1 | RedHat EL 6.5 x64 | 210 (peak) | If some of audio quality criteria can be ignored or waived. |
| SW Profile 1a (16 Kbps bit rate) | HW Profile 6 | RedHat EL 6.6 x64 | 220 (preferred) | |
| SW Profile 1a (16 Kbps bit rate) | HW Profile 6 | RedHat EL 6.6 x64 | 240 (peak) | If some of audio quality criteria can be ignored or waived. |
| SW Profile 1a (16 Kbps bit rate) | HW Profile 6 | RedHat EL 6.6 x64 | 300 (preferred) | 8 Dispatchers (= # of cores) |
| SW Profile 1a (16 Kbps bit rate) | HW Profile 6 | RedHat EL 6.6 x64 | 360 (peak) | If some of audio quality criteria can be ignored or waived. 8 Dispatchers (= # of cores) |
| SW Profile 1b (8 Kbps bit rate) | HW Profile 6 | RedHat EL 6.6 x64 | 600 (preferred) | 8 Dispatchers (= # of cores) |
| SW Profile 1a (8 Kbps bit rate) | HW Profile 6 | RedHat EL 6.6 x64 | 650 (peak) | If some of audio quality criteria can be ignored or waived. 8 Dispatchers (= # of cores) |
| SW Profile 2a (16 Kbps bit rate) | HW Profile 1 | RedHat EL 6.5 x64 | 90 (preferred) | |
| SW Profile 2a (16 Kbps bit rate) | HW Profile 1 | RedHat EL 6.5 x64 | 150 (peak) | If some of audio quality criteria can be ignored or waived. |
| SW Profile 3a (16 Kbps bit rate) | HW Profile 1 | RedHat EL 6.5 x64 | 150 (preferred) | |
| SW Profile 3a (16 Kbps bit rate) | HW Profile 1 | RedHat EL 6.5 x64 | 210 (peak) | If some of audio quality criteria can be ignored or waived. |
Table 4: GIR-GVP Port Capacity on Virtual Machines (VMs)
| SW Profile | HW profile | OS | Port Capacity | Comment |
| SW Profile 1 (32 Kbps bit rate) | VM Profile 1 | VM vSphere 5.1 Windows 2008 R2 x64 |
300 (preferred) | 3 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 1 (32 Kbps bit rate) | VM Profile 1 | VM vSphere 5.1 Windows 2008 R2 x64 |
360 (peak) | 3 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 1 (32 Kbps bit rate) | VM Profile 2 | VM vSphere 5.1 Windows 2008 R2 x64 |
360 (preferred) | 3 VMs: each VM uses 4 vCPU & 1 MCP installed per VM. |
| SW Profile 1 (32 Kbps bit rate) | VM Profile 2 | VM vSphere 5.1 Windows 2008 R2 x64 |
390 (peak) | 3 VMs: each VM uses 4 vCPU & 1 MCP installed per VM. |
| SW Profile 1 (32 Kbps bit rate) | VM Profile 3 | VM vSphere 5.1 Windows 2008 R2 x64 |
520 (preferred) | 4 VMs: each VM uses 3 vCPU & 1 MCP installed per VM. |
| SW Profile 1 (32 Kbps bit rate) | VM Profile 3 | VM vSphere 5.1 Windows 2008 R2 x64 |
600 (peak) | 4 VMs: each VM uses 3 vCPU & 1 MCP installed per VM. |
| SW Profile 1 (32 Kbps bit rate) | VM Profile 4 | VM vSphere 5.1 Windows 2008 R2 x64 |
600 (preferred) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 1 (32 Kbps bit rate) | VM Profile 4 | VM vSphere 5.1 Windows 2008 R2 x64 |
660 (peak) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 1a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5 Windows 2008 R2 x64 |
720 (peak) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 1a (32 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5 Windows 2008 R2 x64 |
840 (peak) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 2 (32 Kbps bit rate MP3 + WAV) | VM Profile 4 | VM vSphere 5.1 Windows 2008 R2 x64 |
360 (preferred) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 2 (32 Kbps bit rate MP3 + WAV) | VM Profile 4 | VM vSphere 5.1 Windows 2008 R2 x64 |
540 (peak) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 3a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5/ Windows 2008 R2 x64 | 480 (preferred) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 3a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5/ Windows 2008 R2 x64 | 840 (peak) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 1a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5/ RH EL 6.5 x64 | 540 (preferred) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 1a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5/ RH EL 6.5 x64 | 660 (peak) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 2a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5/ RH EL 6.5 x64 | 480 (preferred) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 2a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5/ RH EL 6.5 x64 | 600 (peak) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 3a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5/ RH EL 6.5 x64 | 540 (preferred) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 3a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5/ RH EL 6.5 x64 | 660 (peak) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 4a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5/ RH EL 6.5 x64 | 480 (preferred) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
| SW Profile 4a (16 Kbps bit rate) | VM Profile 4 | VM vSphere 5.5/ RH EL 6.5 x64 | 600 (peak) | 6 VMs: each VM uses 2 vCPU & 1 MCP installed per VM. |
Parameter Adjustments
These adjustments achieve higher port capacity:
Parameter Value Adjustments Yielding Higher Port Capacity
| Parameter | Default Value | Adjusted Value |
|---|---|---|
| mpc.recordnumparallelpost | 30 | 300 |
| mpc.recordpostretrybackoff | 120000 | 15000 |
| mpc.recordpostretrycount | 3 | 1 |
| mpc.mediamgr.recordwritetimeinterval | 1000 | 10000 |
| fm.http_proxy | <not empty> | <empty> (squid bypassed) |
This page was last edited on September 25, 2017, at 12:29.
Comments or questions about this documentation? Contact us for support!