Known Issues and Recommendations
The Known Issues and Recommendations section is a cumulative list for all 8.5.x releases of E-mail Server. This section provides the latest information on known issues and recommendations associated with this product. It includes information on when individual items were found and, if applicable, corrected. The Resolved Issues section for each release describes the corrections and may list additional issues that were corrected without first being documented as Known Issues.
See also Internationalization Issues.
In release 22.214.171.124 and later, embedded images are not supported in Thunderbird clients. They are displayed as attachments.
When E-mail Server is working with Exchange Web Services, to ensure that it correctly converts CP932 to MS932 in the Subject line, set the Locale to Japan: Control Panel -> Region and Language -> Administrative -> Change system locale... -> Japanese (Japan).
The Installation Wizard incorrectly allows you to pick Java 8 as a supported version. Java 7 is the only supported version.
|ID: ESR-11063||Found In: 8.5.102.02||Fixed In: 126.96.36.199|
When operating with Exchange 2007, there is the following issue when an email with an attachment is sent to multiple users: if one of the recipient email addresses is not valid, delivery fails for all recipients. As a workaround, upgrade to Exchange version 2010 or higher.
|ID: ESR-10974||Found In: 8.5.101.08||Fixed In:|
The exchange-version option is missing from the [smtp-client] section of the E-mail Server template. This option specifies the version of the corporate Exchange Server that E-mail Server connects to.
- Default Value: No default value
- Valid Values: A valid exchange server version, such as Exchange2007_SP1, Exchange2010, Exchange2010_SP1, Exchange2010_SP2, Exchange2010_SP3, Exchange2013, Office365
- Changes Take Effect: At the next pop cycle
|ID: ESR-10859||Found In: 8.5.101.07||Fixed In: 8.5.102.02|
E-mail Server does not connect to the expected Configuration Server port in the following scenario:
- Configuration Server has an 'autodetect' port configured in addition to a 'default' port.
- At startup E-mail Server connects to the 'autodetect' port.
- The primary Configuration Server is stopped.
- E-mail Server reconnects to the 'default' port of Configuration Server backup instead of the 'autodetect' port.
As a workaround, in the E-mail Server Application configure a connection to the Configuration Server Application, selecting the 'autodetect' port.
|ID: ESR-10692||Found In: 8.5.101.02||Fixed In:|
Configuring E-mail Server to use Java 1.6 does not enable IPv6. When E-mail Server is configured to use Java 1.6, it uses IPv4 to listen on its ESP port and connect to other servers. IPv6 is enabled with Java 1.7 only.
|ID: ESR-10327||Found In: 8.1.400.10||Fixed In:|
After disconnecting from Configuration Server, E-mail Server is unable to process both inbound and outbound emails until the connection is re-established.
|ID: ESR-9563||Found In: 8.5.000.07||Fixed In:|
Under high loads on the database, to avoid inconsistencies such as duplicated inbound e-mails, E-mail Server should have the timeout of its connection to UCS set to a higher value than the sum of the two following values:
-The timeout of UCS's connection to its Database Access Point (DAP). Default value is 60s.
-The value of the UCS option third-party-max-queueing-time (in the 'settings' section). Default value is 15,000 ms.
This means that the E-mail Server option settings/ucs-reconnect-timeout should be higher than 75,000 ms; for example, 80,000 ms.
|ID: ESR-8351||Found In: 8.1.200.00||Fixed In:|
For E-mail Server to use an Exchange Web Server connector, you must select JDK 1.7 (or higher when available) when installing E-mail Server.
|ID: ESR-7706||Found In: 8.1.400.09||Fixed In:|
When using E-mail Server with an Exchange Web Services connector, in the rare case of an e-mail with an HTML part formatted as UTF-7 and containing a Byte Order Mark (BOM) character, an incorrect character may be displayed at the beginning of the text.
|ID: ESR-7645||Found In: 8.1.400.06||Fixed In:|
In some Non-Delivery Reports (NDR), Exchange Server puts the wrong address in the 'to' field of the e-mail header.
|ID: ESR-7406||Found In: 8.1.400.01||Fixed In:|
Information in this section is included for international customers.
There are no internationalization issues for this product.