transport.5
Section: sip
Default Value:
Valid Values:
Changes Take Effect: At start/restart
defines transport layer for SIP stack and the network interfaces that are used to process SIP requests Format: sip.transport.x = transport_name
type:ip:port [parameters]
where transport_name is any string; type is udp/tcp/tls; ip is the IP address of the network interface that accepts incoming SIP messages; If ip is an IPv6 address, [] must be used. To define a transport to listen to all IPv4 interfaces, use "any" or "any4" for ip. To define a transport to listen to all IPv6 interfaces, use "any6" for ip. port is the port number where SIP stack accepts incoming SIP messages;
[parameters] defines any extra SIP transport parameters. Note that this is for LMSIP2.
Example:
cert=[cert path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS certificate to be used key=[key path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS key to be used. type=[Type of secure transport] Applicable to SIPS only and is optional. The type of secure transport to be used and value can be TLSv1, SSLv2, SSLv3, SSLv23. Default to SSLv23. password=[password] Applicable to SIPS only and is optional. The password associated with the certificate and key pair. Required only if key file is password protected. cafile=[CA cert path and filename] Mandatory for TLS mutual authentication. The path and the filename of the certificate to be used for verifying the peer. The same certificate specified in cert=[cert path and filename] parameter can be used as the value here if using only 1 certificate is preferred. verifypeer=true Mandatory for TLS mutual authentication. This parameter turns on the TLS mutual authentication. verifydepth=[max depth for the certificate chain verification] Applicable only to TLS mutual authentication. This parameter sets the maximum depth for the certificate chain verification. For the default Genesys certificate provided, the recommended value is 1.
transport.4
Section: sip
Default Value:
Valid Values:
Changes Take Effect: At start/restart
defines transport layer for SIP stack and the network interfaces that are used to process SIP requests Format: sip.transport.x = transport_name
type:ip:port [parameters]
where transport_name is any string; type is udp/tcp/tls; ip is the IP address of the network interface that accepts incoming SIP messages; If ip is an IPv6 address, [] must be used. To define a transport to listen to all IPv4 interfaces, use "any" or "any4" for ip. To define a transport to listen to all IPv6 interfaces, use "any6" for ip. port is the port number where SIP stack accepts incoming SIP messages;
[parameters] defines any extra SIP transport parameters. Note that this is for LMSIP2.
Example:
cert=[cert path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS certificate to be used key=[key path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS key to be used. type=[Type of secure transport] Applicable to SIPS only and is optional. The type of secure transport to be used and value can be TLSv1, SSLv2, SSLv3, SSLv23. Default to SSLv23. password=[password] Applicable to SIPS only and is optional. The password associated with the certificate and key pair. Required only if key file is password protected. cafile=[CA cert path and filename] Mandatory for TLS mutual authentication. The path and the filename of the certificate to be used for verifying the peer. The same certificate specified in cert=[cert path and filename] parameter can be used as the value here if using only 1 certificate is preferred. verifypeer=true Mandatory for TLS mutual authentication. This parameter turns on the TLS mutual authentication. verifydepth=[max depth for the certificate chain verification] Applicable only to TLS mutual authentication. This parameter sets the maximum depth for the certificate chain verification. For the default Genesys certificate provided, the recommended value is 1.
transport.3
Section: sip
Default Value:
Valid Values:
Changes Take Effect: At start/restart
defines transport layer for SIP stack and the network interfaces that are used to process SIP requests Format: sip.transport.x = transport_name
type:ip:port [parameters]
where transport_name is any string; type is udp/tcp/tls; ip is the IP address of the network interface that accepts incoming SIP messages; If ip is an IPv6 address, [] must be used. To define a transport to listen to all IPv4 interfaces, use "any" or "any4" for ip. To define a transport to listen to all IPv6 interfaces, use "any6" for ip. port is the port number where SIP stack accepts incoming SIP messages;
[parameters] defines any extra SIP transport parameters. Note that this is for LMSIP2.
Example:
cert=[cert path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS certificate to be used key=[key path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS key to be used. type=[Type of secure transport] Applicable to SIPS only and is optional. The type of secure transport to be used and value can be TLSv1, SSLv2, SSLv3, SSLv23. Default to SSLv23. password=[password] Applicable to SIPS only and is optional. The password associated with the certificate and key pair. Required only if key file is password protected. cafile=[CA cert path and filename] Mandatory for TLS mutual authentication. The path and the filename of the certificate to be used for verifying the peer. The same certificate specified in cert=[cert path and filename] parameter can be used as the value here if using only 1 certificate is preferred. verifypeer=true Mandatory for TLS mutual authentication. This parameter turns on the TLS mutual authentication. verifydepth=[max depth for the certificate chain verification] Applicable only to TLS mutual authentication. This parameter sets the maximum depth for the certificate chain verification. For the default Genesys certificate provided, the recommended value is 1.
transport.2
Section: sip
Default Value: transport2 tls:any:5069 cert=$InstallationRoot$/config/x509_certificate.pem key=$InstallationRoot$/config/x509_private_key.pem
Valid Values:
Changes Take Effect: At start/restart
defines transport layer for SIP stack and the network interfaces that are used to process SIP requests Format: sip.transport.x = transport_name
type:ip:port [parameters]
where transport_name is any string; type is udp/tcp/tls; ip is the IP address of the network interface that accepts incoming SIP messages; If ip is an IPv6 address, [] must be used. To define a transport to listen to all IPv4 interfaces, use "any" or "any4" for ip. To define a transport to listen to all IPv6 interfaces, use "any6" for ip. port is the port number where SIP stack accepts incoming SIP messages;
[parameters] defines any extra SIP transport parameters. Note that this is for LMSIP2.
Example:
cert=[cert path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS certificate to be used key=[key path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS key to be used. type=[Type of secure transport] Applicable to SIPS only and is optional. The type of secure transport to be used and value can be TLSv1, SSLv2, SSLv3, SSLv23. Default to SSLv23. password=[password] Applicable to SIPS only and is optional. The password associated with the certificate and key pair. Required only if key file is password protected. cafile=[CA cert path and filename] Mandatory for TLS mutual authentication. The path and the filename of the certificate to be used for verifying the peer. The same certificate specified in cert=[cert path and filename] parameter can be used as the value here if using only 1 certificate is preferred. verifypeer=true Mandatory for TLS mutual authentication. This parameter turns on the TLS mutual authentication. verifydepth=[max depth for the certificate chain verification] Applicable only to TLS mutual authentication. This parameter sets the maximum depth for the certificate chain verification. For the default Genesys certificate provided, the recommended value is 1.
transport.1
Section: sip
Default Value: transport1 tcp:any:5068
Valid Values:
Changes Take Effect: At start/restart
defines transport layer for SIP stack and the network interfaces that are used to process SIP requests Format: sip.transport.x = transport_name
type:ip:port [parameters]
where transport_name is any string; type is udp/tcp/tls; ip is the IP address of the network interface that accepts incoming SIP messages; If ip is an IPv6 address, [] must be used. To define a transport to listen to all IPv4 interfaces, use "any" or "any4" for ip. To define a transport to listen to all IPv6 interfaces, use "any6" for ip. port is the port number where SIP stack accepts incoming SIP messages;
[parameters] defines any extra SIP transport parameters. Note that this is for LMSIP2.
Example:
cert=[cert path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS certificate to be used key=[key path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS key to be used. type=[Type of secure transport] Applicable to SIPS only and is optional. The type of secure transport to be used and value can be TLSv1, SSLv2, SSLv3, SSLv23. Default to SSLv23. password=[password] Applicable to SIPS only and is optional. The password associated with the certificate and key pair. Required only if key file is password protected. cafile=[CA cert path and filename] Mandatory for TLS mutual authentication. The path and the filename of the certificate to be used for verifying the peer. The same certificate specified in cert=[cert path and filename] parameter can be used as the value here if using only 1 certificate is preferred. verifypeer=true Mandatory for TLS mutual authentication. This parameter turns on the TLS mutual authentication. verifydepth=[max depth for the certificate chain verification] Applicable only to TLS mutual authentication. This parameter sets the maximum depth for the certificate chain verification. For the default Genesys certificate provided, the recommended value is 1.
transport.0
Section: sip
Default Value: transport0 udp:any:5068
Valid Values:
Changes Take Effect: At start/restart
defines transport layer for SIP stack and the network interfaces that are used to process SIP requests Format: sip.transport.x = transport_name
type:ip:port [parameters]
where transport_name is any string; type is udp/tcp/tls; ip is the IP address of the network interface that accepts incoming SIP messages; If ip is an IPv6 address, [] must be used. To define a transport to listen to all IPv4 interfaces, use "any" or "any4" for ip. To define a transport to listen to all IPv6 interfaces, use "any6" for ip. port is the port number where SIP stack accepts incoming SIP messages;
[parameters] defines any extra SIP transport parameters. Note that this is for LMSIP2.
Example:
cert=[cert path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS certificate to be used key=[key path and filename] Applicable to SIPS only and mandatory if using SIPS. The path and the filename of the TLS key to be used. type=[Type of secure transport] Applicable to SIPS only and is optional. The type of secure transport to be used and value can be TLSv1, SSLv2, SSLv3, SSLv23. Default to SSLv23. password=[password] Applicable to SIPS only and is optional. The password associated with the certificate and key pair. Required only if key file is password protected. cafile=[CA cert path and filename] Mandatory for TLS mutual authentication. The path and the filename of the certificate to be used for verifying the peer. The same certificate specified in cert=[cert path and filename] parameter can be used as the value here if using only 1 certificate is preferred. verifypeer=true Mandatory for TLS mutual authentication. This parameter turns on the TLS mutual authentication. verifydepth=[max depth for the certificate chain verification] Applicable only to TLS mutual authentication. This parameter sets the maximum depth for the certificate chain verification. For the default Genesys certificate provided, the recommended value is 1.
ssl_version
Section: fm
Default Value: 0
Valid Values:
Changes Take Effect: At start/restart
Set what version of SSL to attempt to use. By default, the SSL library will automatically detect the correct version. This parameter can be used to override this automatic detection, for situations where the wrong version is chosen.
9.0.013.03
Voice Platform Call Control Platform Release Notes
| Release Date | Release Type | Restrictions | AIX | Linux | Solaris | Windows |
|---|---|---|---|---|---|---|
| 10/11/18 | General | X | X |
Helpful Links
Releases Info
Product Documentation
Genesys Products
What's New
This release contains the following new features and enhancements:
- Call Control Platform (CCP) supports Windows Server 2016 Standard edition. See the Genesys Voice Platform page in the Genesys Supported Operating Environment Reference Guide for more detailed information and a list of all supported operating systems.
- CCP now uses OpenSSL libraries version 1.0.2j.
- CCP supports the TLSv1, TLSv1.1, and TLSv1.2 versions of Transport Layer Security (TLS).
- CCP supports the SSLv2, SSLv3, and SSLv23 versions of Secure Sockets Layer (SSL).
- The sip.transport.<n> type = (default is TLSv1_2) and ssl_version = (default is 0) configuration options support the versions of TLS and SSL mentioned above.
- transport.0
- transport.1
- transport.2
- transport.3
- transport.4
- transport.5
Resolved Issues
This release contains the following resolved issues:
CCP is no longer blocked while waiting for an SSL connection to a web server through an HTTPS proxy to finish. (GVP-37123)
CCP no longer restarts when it receives SIP response 491 followed by SIP CANCEL message for an INVITE message in Conferencing. (GVP-21697)
CCP no longer deadlocks in a race condition, in the time between a SIP response to a dialog and the dialog cancellation on the application level. (GVP-21237)
CCP no longer terminates unexpectedly while a fetched document is being compiled. (GVP-21113)
Upgrade Notes
No special procedure is required to upgrade to release 9.0.013.03.