Voice routing
Your Business Edition Premise system comes pre-configured with the tools and data needed to route inbound calls to your agents, typically including:
- Auto-attendant (IVR) menus
- Audio resources
- Reporting categories
Administrators can perform many voice routing tasks without prior knowledge of Genesys software. To learn more about voice routing, see Voice routing overview.
Genesys Administrator Extension and parameter groups
[+] How Business Edition Premise uses GAX parameter groups
To perform any of the following tasks, open GAX (http://UI VM name or IP address:8080/gax), go to Operations > Parameter groups, select the appropriate parameter group, and complete the task.
To use Internet Explorer 10 to access Genesys Administrator Extension, you must add the following to the IE Trusted Sites:
- http://your UI VM domain
- about:blank
Hours
Declare an emergency
Declaring an emergency plays the Emergency announcement.
Change the value of Emergency declared to True.
Change open hours or set special days
The parameter Open hours sets the standard hours that your office is open and accepting calls.
Use the Special day parameter to set:
- The dates or days of the week on which your office is closed for the entire day.
- The dates or days of the week on which your office is closed for only part of the day. In these cases, you use the Time Ranges field in GAX to set the hours that you will be open on that date.
Specific dates set in Open hours are treated as special days. Hours set for the same date in Special day override those set in Open hours; for example, if Open hours specifies that you are open from 9AM to noon on December 31, and Special day sets the hours of 11AM-2PM for the same date, callers who call at 10AM on that date hear the Closed announcement. Similarly, in both parameters, date patterns higher in the list take precedence over those lower in the list.
In Open Hours, select a day of the week or a date. Important: To specify open hours on specific dates, you must place the date above all day-of-week entries.
In Special Day, add or select a date. To close for the entire date, leave the Time Ranges field empty.
Audio and announcements
Activate greetings
Greeting 2 plays after Announcement-Greeting 1 if Greetings activated is True and an Announcement-Greeting 2 file is uploaded.
To activate greetings, change the value of Greetings activated to True.
Change announcements
Select a different audio resource for any of the parameters below.
| Parameter | Description |
|---|---|
| Announcement-Auto attendant menu | Played if the auto-attendant menu is activated; Important: if you change this menu announcement, you must also change the corresponding targets for the touch tone parameters. |
| Announcement-Closed | Played if the service is closed |
| Announcement-Emergency | Played if Emergency declared is activated |
| Announcement-Greeting 1 | Played if Greetings activated is True |
| Announcement-Greeting 2 | Played after Announcement-Greeting 1 if Greetings activated is True and an Announcement-Greeting 2 file is uploaded |
| Announcement-Special day | Played for a special day |
| Music File | Music played while the caller is in the queue |
Change personality
You can switch among personalities defined by your provider, possibly to accommodate another language or speaker.
Change the value of Personality to another personality.
Change the value of Auto attendant menu activated to True.
Change target for touch tones
Change the value of any of the Touch tone parameters to a new target agent group.
Distribution
Set target agent groups
Targets 1-4 are the four agent groups, in sequence, to which calls are routed. You can skip a target as needed; calls are routed from Target 1 to Target 3 if Target 2 is empty.
Set target timeouts
Change the timeout for each group as needed. The default for Target 1 timeout is 300 seconds, or 5 minutes; the others are set to 1 second.
Set a target overflow number
Optionally, you can assign a Target overflow telephone number, which serves as the "last resort" number to which a call is transferred when none of the other target agent groups answers within their timeout (or if no target agent group is specified). Important: this value cannot be a routing point (such as 6000).
Priority
Tune priorities
You can adjust the priority of calls using the four priority tuning options. Over time, unanswered calls receive higher and higher priority, ensuring that calls do not remain in the queue for excessive lengths of time.
- Priority start sets the initial call priority; you typically have little reason to change the default of 1.
- Priority interval sets the number of seconds between priority increments. If you set the priority interval to 60 seconds, for example, and the priority increment is 1, then after 5 minutes of wait time, the call would have a priority level of 6, pushing it ahead of calls with priority values of 1-5.
- Priority Increment sets the number to add to the priority value each time the priority interval is exceeded. As the priority levels are relative, a setting of 1 typically works.
- Priority limit sets the upper limit for priority increments; all calls at the maximum priority level receive equal treatment.
Reporting
Assign reporting categories
The five default business parameters (Service, Segment, Product, Department, and Flow) represent reporting categories and are completely customizable to your business model. You can assign different combinations of these parameters to each of your Inbound and Distribution parameter groups, to distinguish them in reporting and enable you to identify the unique properties of the parameter group.
Change the value of any of the five reporting categories (business attributes) to adjust to changes in your Inbound or Distribution parameter groups.