Jump to: navigation, search

Setting up your user profile

Warning
This User's Guide applies ONLY to the Legacy SIP Feature Server 8.1.200.xx release. Unless you have been told to use this documentation, use the current 8.1.2 User's Guide.

User profiles are not available for all users.

To set up or edit your user profile:

  1. Log into the Feature Server User Web application (<Feature Server IP address>:8080/fs/user).
  2. At the bottom of the page, click Edit.
  3. Select a time zone. Select Default to use the system time zone.
  4. Configure your call settings:
    Setting Values
    (default value in bold)
    Description
    Reject Call On Not Ready Off, On Rejects calls when you are not ready on a device.
    Call Waiting On, Off Allows incoming call even if another call is in progress.
    No Answer Timeout 30 sec, 5 to 60 seconds (in 5-second intervals) Specifies the length of time, in seconds, that Feature Server waits for you to answer a ringing call.
    Voicemail Enabled Yes, No Works in combination with Call Waiting and Do Not Disturb.
    • If Voicemail Enabled is set to off, second calls are rejected if Do Not Disturb (DND) is set and Call Waiting is set to off.
    • If Voicemail Enabled is set to on, second calls are forwarded to voicemail if Do Not Disturb (DND) is set and Call Waiting is set to off
    Forward All Calls to Default (Not Set), Voicemail, <dialed number> Immediately forwards all calls to voicemail or to the specified dialed number.
    Forward On No Answer Default (Not Set), Voicemail, <dialed number> After the No Answer Timeout value, forwards calls to voicemail or to the specified dialed number.
    Forward On Busy Default (Not Set), Voicemail, <dialed number> When you are on a call, forwards calls to voicemail or to the specified dialed number.
  5. Click Save changes.
This page was last edited on August 21, 2015, at 23:47.
Comments or questions about this documentation? Contact us for support!