Click Shared Modules in the navigation bar to manage your shared modules. Shared modules are small pieces of applications that you can use in one or more applications. If you change a shared module, you are also changing all of the applications that use that module.
There are four types of shared modules:
- Self Service - Used within the Self Service phase of an application.
- Assisted Service - Used within the Assisted Service phase of an application, or within the Initialize phase with certain restrictions (see the note below).
- Templates - Used with the Callback block. These templates are read-only and cannot be edited or deleted. Click Hide Templates to hide these shared modules in the list.
- Digital - Used within Digital application types.
- You cannot switch the type after you create the shared module.
- Before you publish a module, you must ensure the module is adequately developed for use within applications. It should have well-defined input and output parameters that can be specified in the host application.
- The Route Agent, Route Call, Voice Mail, and Callback blocks are not supported in Assisted Service type shared modules if the shared module is used in the Initialize phase.
Modules can be used in different ways, depending on how you are planning your application. Currently, you can use modules with the following blocks:
Larger application flows can often be difficult to manage. By dividing a larger application into smaller segments of individual flows, you can then "stitch" it back together using Shared Module blocks. This helps to make the flow size more manageable and also promotes reuse within and across applications.
Routing blocks (as "Busy Treatments")
You can use Self Service type modules to play busy treatments for callers (for example, play them some music while they wait to be connected with an agent). They can also be used to keep callers updated about their estimated wait times and, if the times seem excessive, offer them additional services (such as Callback). These modules will loop automatically until the call is routed, the caller hangs up, or the timeout specified in the routing block expires -- at which point the next block in the application is triggered.
Start Treatment block
The Start Treatment block also offers busy treatments to callers, but works a bit differently than the ones offered by routing blocks. Typically, you would use this block in the Assisted Service phase when you want to start a busy treatment (for example, play an audio file to callers while they wait to speak with an agent) and then move on to the routing blocks, without interrupting the playback to the caller.
Click Add Module to create a new module. At this stage, it does not have a version number associated with it and it is not visible to applications. In the pop-up window, enter a name for the module in the Name field and specify in the Type drop-down whether this module is for the Self Service or Assisted Service phase.
When you are editing a module, you can perform the following actions:
- Save Flow - Save and validate changes to the module. Each save creates an incremented revision.
- Create Version - Create a new version of the module and make it available to applications. You must specify the following information:
- Version label - The version number (for example, 1.0).
- Notes - Relevant information for use of this module.
You can import a shared module that was previously exported from another Designer workspace by clicking Import Module. Click Choose file to browse to the location of the archived file, then click Upload.
If everything looks ok, click Confirm. Designer will import all versions of the module that were exported to the archived file and upgrade any versions that need to be upgraded.
Click Settings in a Shared Module to access its settings.
In the Audio Resource Collection drop-down menu, select Inherits Audio Collection from Calling Context if you want the shared module to inherit its audio collection from the host application. Otherwise, select an audio collection in the drop-down list if you want the shared module to only use a specific audio collection.
You have one shared module that is used within two applications.
First, open the shared module and click Settings. In the pop-up window, select the Audio Resource Collection drop-down menu and choose Inherits Audio Collection from Calling Context.
Next, in the module's Play Message block, specify the type is Announcement and ensure the Variable? check box is checked. Choose a variable name (this example uses greeting).
Finally, in each application's Audio Collections, create an announcement called greeting. When playing the Play Message block, the call searches the inherited calling context audio collection for greeting.
Milestone Path Prefix
Specify a prefix to use with this application's milestone paths.
DTMF Options Tab
This tab enables you to set global DTMF commands for your shared module. These DTMF keys can be used at any time within the shared module to trigger a specified action.
To set a global DTMF command, select the drop-down menu beside the corresponding DTMF key that you want to use. In the drop-down menu, select a target block for the DTMF key. Click OK when you are done setting global DTMF commands.
Your shared module (Shared Module A) might interact with another shared module (Shared Module B) that also has global DTMF commands. In this case, Designer processes DTMF commands in this order:
- By block. For example, a DTMF command within a User Input block or a Menu block that expects this DTMF command.
- By global setting in Shared Module B.
- By global setting in Shared Module A.
- By global setting in the host application.
If the DTMF command is not used by one of the above, Designer discards the command.
The following additional operations are available in the Actions column:
- List module versions - Lists the available versions.
- List module consumers - Lists applications that use any version of this module.
- Clone module - Clone the selected module and save it with a new name.
- Export module - Export the selected module for use in another Designer workspace. When you export a module, all versions of that module are exported, including the unpublished version.
- Delete module - Deletes all versions of this module. Published applications that already use the module (in other words, applications that have already generated their code) are not affected.