Call Data Block

From Genesys Documentation
Jump to: navigation, search
This topic is part of the manual Designer User's Guide for version Current of Designer.

Use this block to read and write data that can be accessed from both inside and outside the application.

Related documentation:

The Call Data block enables you to read and write data that can be accessed from both inside and outside the application.

The data format consists of key-value pairs (KVP). For every key in the call data, you can associate a value with it. This value can be represented as an integer, character string, binary (boolean) type, or as a list of KVPs.

While data in application variables only exist within the application, information stored in call data can persist and be retrieved even after the application has stopped running. This allows an application to retrieve information about an interaction that was created before the application started running or preserve information about a customer or interaction that can be processed later by another application.

Using this block

You can add the block to the Self Service or Assisted Service phase, but the block can behave differently depending on the phase in which it is used. These differences are noted where applicable, so be sure to review the information carefully when setting up the block.

In addition, the following recommendations and guidelines must be followed when using this block:

Use fixed key names

Make sure to use fixed key names that won't change based on time, date, a varying ID of any kind, ANI, DNIS, or any other variables that can change between successive calls or digital interactions handled by the application. For example, avoid a key name like myKeyName + ANI, where ANI is the system variable that is automatically set by Designer.

Warning
Using dynamically changing key names is not recommended. They can cause significant performance issues and may be blocked in a future version of Designer without notice.

Restricted variable names

There are certain variable names used by Designer that must not be updated by the Call Data block. See Restricted variable names for a list of these names.

Secure and sensitive data

DO NOT attach sensitive data, such as personally identifiable information (PII) or secure variables, to user data in the Call Data block. Otherwise, this information is captured by platform logs and reported in Designer Analytics.

Syntax requirements

When entering values, you must escape quote characters by using a preceding backslash. For example:

  • Correct: Joe\'s Pizza
  • Incorrect: Joe's Pizza

The Call Data block only accepts string type keys and values, so you do not need to enclose these values in single quotes.

Read Data tab

Use the Read Data tab to specify keys to be read from Call Data and stored into application variables. You can toggle the key being read between a variable and a string.

Edit Data tab

Use the Edit Data tab to specify key-value pairs to be written to the call data. There are some differences in how this block works, depending on whether it is added to the Self Service or Assisted Service phase. Make sure to review the details for each phase, below, so that you are aware of these differences.

Use this data for async chat (does not apply to voice)

If enabled, this option allows the key-value pairs to be carried forward from the current chat session and used later in asynchronous chat sessions that start while the interaction is still being processed. For example, if a customer starts a chat session and is transferred to an agent, Designer can retrieve the KVPs from that session if the customer resumes activity in the chat window after the initial session timed out. This option is disabled by default.

Self Service phase

If this block is in the Self Service phase, use the Edit Data tab to specify key-value pairs to be written to the call data (see an example). When used in Self Service, the Call Data block has the following restrictions:

  • Non-variable key names must follow standard JavaScript rules for variable names, even if the keys are not variables. For example, key names must only contain alphanumeric characters (no spaces) and not match any of the restricted variable names.
  • Call data cannot be deleted. In the Self Service phase, the Edit Data tab does not have the Remove option, as is available in the Assisted Service phase.

When a key-value pair list is used as a value in the user data for a Call Data block in the Self Service phase, the user data is attached to the call, but the platform encodes any special characters that appear in the user data, such as single quotation marks ('), double-quotation marks ("), backslashes (\), commas (,), colons (:), semicolons (;), and so on.

You can specify literal or variable values (or a combination) for each KVP, using one of the following options:

Variable Key + Variable Value

If you enable the variable checkbox for Key, the variable checkbox for Value is automatically selected and its dropdown menu is disabled (i.e. grayed out). Whichever variable you select for Key is also applied to Value. In this case, Designer will update the Key in the call data with the name of the variable and the Value with the value that is stored in it:

Des call data edit 01.png

Literal Key + Literal Value

You can also enter literal values for both Key and Value. In this case, the entries are not required to match; each value is written to the call data as specified:

Des call data edit 03.png

Literal Key + Variable Value

If using a literal value for Key and specifying a variable for Value, make sure that the name of the variable you select does NOT match the entry provided for Key. Otherwise, the call data won’t be updated correctly.

Des call data edit 02.png

Assisted Service phase

If this block is in the Assisted Service phase, use the Edit Data tab to specify key-value pairs to be written to the call data, either by adding data with new keys (Add/Update operation), updating data for existing keys (Add/Update operation), or deleting data for existing keys (Remove operation):

  • Add/Update - Add or update data with the specified key. This operation automatically adds the key-value if the specified key does not yet exist in the Call Data, or, if the provided key does exist in the Call Data, it automatically updates data for the key. You can toggle both the key and the value independently between a variable and a string.
  • Remove - Provide the key for data you want to delete, which you can toggle between a variable and a string. At runtime, if the key you try to delete does not exist, nothing happens.

You can also add or remove a list of key-value pairs in a single operation with a JavaScript (JSON) object. For more information, see Using JSON objects to update or remove key-value pairs.

If you need to update a large amount of key-value pairs (i.e. 30 or more), see Adding or Removing Large Amounts of Key-Value Pairs.

Advanced tab

If this block is in the Assisted Service phase, use the Advanced tab to add an extension as a key-value pair to the key. Click Add Extension Data to add an extension as a key-value pair to this block. The value type can be a string or integer.

If you want to use a variable for the Key or Value, select the Variable checkbox and then select a variable from the drop-down menu. If the Value is an integer, select the Integer checkbox.

You do not need to enclose extension values in quotes. However, if the quote is part of the value, you must escape the quote character by using a preceding backslash (see Syntax requirements).

Important
Designer displays an error message if Extension Data is added, but the Key and Value settings are not defined.
This example shows a few different ways that key-value pairs can be added as extensions:

Des add extension example.png

Examples

This section contains a few examples of how you can use the Call Data block.

Self Service

In this example, we'll use the Call Data block to specify a key-value pair to be written to the call data. We've created a variable called CustomerSegment that Designer will use to store the segment detail about the customer (for example, Bronze) and we want to associate its value with the segment key in the call data.

On the Edit Data tab, we'll click Add Data to specify a new key-value pair. For the Key field, we'll enter segment. For the Value, we'll enable the Variable checkbox and select the CustomerSegment variable we created earlier.

Watch:

Des call data self service ex.gif

For more information about using the Edit Data tab in the Self Service phase, see Self Service phase.

Assisted Service

This example shows how you can assign the value of a key-value pair in the Call Data block to a variable in the Assisted Service phase.

First, initialize your variables as various data types (integer, character string, binary [boolean], and so on), and create a variable for your key-value pair (in this example, we are using var_kvp):

Des call data initialize.png

Next, initialize a variable as a list of key-value pairs using the Assign Variables block. In this example, we've done this using ECMAScript on the Advanced Scripting tab:

Des call data assign kvp.png

Finally, add the user data as a key-value pair in the Call Data block:

Des call data block.png

Using JSON objects to update or remove key values

You can use the Advanced Scripting tab of the Assign Variables block to create a JSON object that can update or remove key values in a single operation. In this example, we've created a JSON object that will update the value for one key to Sales and delete the value for another by assigning it a value of undefined:

Des call data kvp 02.png

You can then use the Call Data block to reference this JSON object and perform the operation. On the Edit Data tab, select the variable that contains the JSON object:

Des assign var advanced kvp1.png

This method can also be used to make bulk updates to a large amount of key-value pairs (i.e. 30 or more), as described in the next example.

Adding or removing large numbers of key-value pairs

To add or delete several (i.e. 30 or more) key-value pairs, use the Advanced Scripting tab of an Assign Variables block to create a JSON object that lists each of the keys you want to modify.

For example, to remove a large amount of key-value pairs, create a script that assigns each key a 'null' (or undefined) value. In this example, we've defined an object called jsonData and assigned each of its keys a value of null:

Des assign var advanced kvp.png

If you wanted to add/update the keys, simply use the script to assign the desired values to each key. You can then reference this JSON object as a variable in the Call Data block to perform the desired operation:

Des assign var advanced kvp2.png

Note that the operations are processed in smaller batches, to prevent too many requests from being processed at one time.

Tip
This method can be used in conjunction with the standard key-value pair operations described in Edit Data tab

Restricted variable names

The following variable names are used by the Designer application and must not be updated by the Call Data block.

  • _CB_N_CUSTOMER_ABANDONED_WHILE_WAITING_FOR_AGENT
  • _CB_SERVICE_ID
  • _CB_T_CALLBACK_ACCEPTED
  • _CB_T_CUSTOMER_CONNECTED
  • _CB_T_SERVICE_START
  • _COMPLETE_CS
  • _SEND_FINAL_UE
  • CustomerSegment
  • EXECUTION_MODE
  • GMS_UserData
  • gvp-tenant-id
  • gsw-ivr-profile-name
  • GSYS_IVR
  • GSYS_SystemApplicationDisposition
  • IApplication
  • IApplicationVersion
  • IPurpose
  • orsurl
  • orssessionid
Warning

The addition, updating, and removal of Call Data do not happen instantaneously while the application is running. The application starts the operation to edit the Call Data, and then continues to the next block, without waiting for confirmation that the Call Data is successfully modified.

Thus, there is no guarantee that the "write" operation has finished—a subsequent "read" operation could potentially give you either an old value or an updated value on different runs through the application.

For this reason, Genesys recommends that you do not write a key-value pair and then attempt to read back the same key from the Call Data within an application. If you need to access a Call Data value that was already edited within the application, Genesys recommends that you use the corresponding application variable.

Retrieved from "https://all.docs.genesys.com/DES/Current/Designer/CallData (2024-03-19 08:38:32)"
Comments or questions about this documentation? Contact us for support!