Release Note

iWD Manager

8.0.x

Genesys Telecommunications Laboratories, Inc. © 2010–2016

Contents

Introduction

Release Number AIX HP-UX Linux Solaris Tru64 UNIX Windows
8.0.003.34 [11/24/16] – Hot Fix X   X X   X
8.0.003.33 [02/18/14] – Hot Fix X   X X   X
8.0.003.32 [12/23/13] – Hot Fix X   X X   X
8.0.003.31 [10/15/13] – Hot Fix X   X X   X
8.0.003.30 [08/22/13] – Hot Fix X   X X   X
8.0.003.29 [08/15/13] – Hot Fix X   X X   X
8.0.003.28 [07/31/13] – Hot Fix X   X X   X
8.0.003.26 [05/28/13] – Hot Fix X   X X   X
8.0.003.25 [05/14/13] – Hot Fix X   X X   X
8.0.003.24 [04/25/13] – Hot Fix X   X X   X
8.0.003.23 [03/29/13] – Hot Fix X   X X   X
8.0.003.22 [02/01/13] – Hot Fix X   X X   X
8.0.003.21 [10/19/12] – Hot Fix X   X X   X
8.0.002.24 [10/12/12] – Hot Fix X   X X   X
8.0.003.20 [09/05/12] – Hot Fix X   X X   X
8.0.003.19 [08/24/12] – Hot Fix X   X X   X
8.0.002.23 [08/02/12] – Hot Fix X   X X   X
8.0.003.18 [07/19/12] – Hot Fix X   X X   X
8.0.002.22 [06/29/12] – Hot Fix X   X X   X
8.0.003.17 [04/12/12] – Hot Fix X   X X   X
8.0.003.16 [03/09/12] – General X   X X   X
8.0.003.14 [02/17/12] – Hot Fix X   X X   X
8.0.003.11 [01/16/12] – Hot Fix X   X X   X
8.0.003.09 [12/02/11] – General X   X X   X
8.0.002.21 [11/01/11] – General X   X X   X
8.0.002.20 [10/12/11] – Hot Fix X   X X   X
8.0.002.19 [09/16/11] – Hot Fix X   X X   X
8.0.002.17 [08/11/11] – Hot Fix X   X X   X
8.0.002.16 [08/05/11] – Hot Fix X   X X   X
8.0.002.15 [07/14/11] – Hot Fix X   X X   X
8.0.002.11 [04/19/11] – Hot Fix X   X X   X
8.0.002.10 [04/05/11] – Hot Fix X   X X   X
8.0.002.08 [03/11/11] – General X   X X   X
8.0.001.06 [11/30/10] – General X   X X   X
8.0.000.20 [09/17/10] – General X         X

Link to 7.6 Product Release Note (Cumulative)
Known Issues and Recommendations
Discontinued Support
Internationalization
Additional Information


Introduction

As of February 1, 2012, Genesys is no longer an affiliate of Alcatel-Lucent; any indication of such affiliation within Genesys products or packaging is no longer applicable. Please see the Genesys website at http://www.genesys.com for more details.

This release note applies to all 8.0 releases of iWD Manager, a graphical user interface for both technical and business configuration of the iWD solution, including the configuration of business rules and real-time management of tasks for business users.

Use of Third-Party Software

Genesys follows applicable third-party redistribution policies to the extent that Genesys solutions utilize third-party functionality. For additional information on third-party software used in this product, see the Read Me. Please contact your Genesys Customer Care representative if you have any questions.


Release Number 8.0.003.34 [11/24/16] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release contains no corrections or modifications.

Top of Page


Release Number 8.0.003.33 [02/18/14] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release contains no corrections or modifications.

Top of Page


Release Number 8.0.003.32 [12/23/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release contains no corrections or modifications.

Top of Page


Release Number 8.0.003.31 [10/15/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release.

Corrections and Modifications

This release contains the following corrections and modifications:


Thread management and connection management in iWD Manager have been improved. Previously, unnecessary threads and connections were being created which, in high load situations, could lead to slowdowns and occasional OutOfMemory exceptions. This is now controlled by configuring a new parameter, iwd.connectorKeepAlive in the iwd.properties file. This parameter defines how long connections to Interaction Servers and Configuration Servers should be maintained since the user's last activity on iWD Manager. The default value is set to 0 (zero), which means that the connection will be kept alive for the life of the user's current session. This parameter has no impact on the iWD Runtime Node. (IWD-3416)


Top of Page


Release Number 8.0.003.30 [08/22/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release.

Corrections and Modifications

This release contains the following corrections or modifications:


iWD Manager now works correctly under load. Previously, it issued Error 500 messages in the browser session while browsing interactions. (IWD-3379)


Top of Page


Release Number 8.0.003.29 [08/15/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release.

Corrections and Modifications

This release contains the following corrections or modifications:


iWD Manager no longer stops responding if it receives a new browse request before the previous request is finished. Previously, in this scenario, iWD Manager sometimes stopped responding, if it received a new request to browse interactions before the previous requests had a chance to finish. (IWD-3367)


Top of Page


Release Number 8.0.003.28 [07/31/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release.

Corrections and Modifications

This release contains the following corrections or modifications:


iWD Manager's Global Task List now correctly handles the updates of the Interaction Server Database configuration. Previously, it was necessary to restart the iWD Manager application. (IWD-3348)


iWD Manager no longer sends the request RequestChangeProperties to the Interaction Server, if the requested interaction was not found. (IWD-3126)


Top of Page


Release Number 8.0.003.26 [05/28/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release contains the following corrections or modifications:


A problem with the handling of the maximum limit of snapshots has been corrected. Previously, if the maximum number of snapshots taken by iWD Manager was reached, an error was displayed. Now, iWD Manager correctly releases unused or old snapshots. (ER# 321741468)


Top of Page


Release Number 8.0.003.25 [05/14/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release contains no corrections or modifications.

Top of Page


Release Number 8.0.003.24 [04/25/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

There are no corrections and modifications in this release.

Top of Page


Release Number 8.0.003.23 [03/29/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of iWD Manager.

Corrections and Modifications

This release contains the following corrections and modifications:


By default, Global Task List now sorts the tasks by their creation date. Previously they were sorted by interaction ID. (ER# 312616495)


After login, iWD Manager now automatically switches to the last open iWD tenant. Previously it defaulted to the System tenant. (ER# 312616467)


iWD Manager now uses the correct SQL statement to verify connectivity to its configuration database on MSSQL. Previously, it tried to use the statement intended for the Oracle database. (ER# 319490286)


The Is Assigned and Is Not Assigned filter criteria now work correctly when a task is manipulated from the Global Task List. However, all filters, including the default ones, need to be manually modified: the Is Assigned and Is Not Assigned criteria must be removed and added again, and the filter should be saved. (ER# 319464972)


Top of Page


Release Number 8.0.003.22 [02/01/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of iWD Manager.

Corrections and Modifications

This release contains the following corrections and modifications:


Problems with the Is Held, Is Not Held and Is Overdue filter parameters have been fixed. Customer-built filters that use these parameters will need to be rebuilt. ER# 311566119)


Top of Page


Release Number 8.0.003.21 [10/19/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release contains no corrections or modifications.

Top of Page


Release Number 8.0.002.24 [10/12/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix release for this product. There are no new features or functionality in this release.

Corrections and Modifications

This release contains the following corrections or modifications:


Error handling has been improved. Previously, it failed with a NullPointerException error if the user did not have access to the Interaction Server application. (ER# 308130398)


Top of Page


Release Number 8.0.003.20 [09/05/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this release. There are no new features or functionality in this release.

Corrections and Modifications

This release includes the following corrections and modifications since the previous release of this software:


Response times for iWD Manager's Global Task List have been improved in this release. (ER# 307005902)


Top of Page


Release Number 8.0.003.19 [08/24/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this release. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release includes the following corrections and modifications since the previous release of this software:


iWD Manager now properly reconnects to its configuration database if the connection is lost. Previously in this scenario, iWD Manager required a DB Init/Upgrade procedure to reconnect. (ER# 300209890 and ER# 301988077)


Top of Page


Release Number 8.0.002.23 [08/02/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release contains no corrections or modifications.

Top of Page


Release Number 8.0.003.18 [07/19/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this release. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release includes the following corrections and modifications since the previous release of this software:


Advanced filtering by date now works correctly on Oracle databases. Previously, it failed to retrieve any tasks. (ER# 303224801)


An incorrect error message (indicating database initialization/upgrade required) that was appearing during login has now been removed. (ER# 301988077)


Top of Page


Release Number 8.0.002.22 [06/29/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this release. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release contains no corrections or modifications.

Top of Page


Release Number 8.0.003.17 [04/12/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release includes no corrections or modifications.

Top of Page


Release Number 8.0.003.16 [03/09/12] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. This section describes new features and functionality that were introduced in this release of iWD Manager:

Corrections and Modifications

This release includes the following corrections and modifications:


Interaction Server database update scripts now execute correctly. (ER# 294870526)


Top of Page


Release Number 8.0.003.14 [02/17/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this release. This section describes new features and functionality that were introduced in this release of iWD Manager:

To upgrade your environment from any iWD 8.0.002.xx release to any iWD 8.0.003.xx release, please refer to the upgrade procedure document at https://sites.google.com/a/iwdlab.com/iwd8/deployment/upgrade-procedure.

Corrections and Modifications

This release includes the following corrections and modifications since the previous release of this software:


iWD Manager now correctly works with Internet Explorer 8. Previously, when creating linear rules, it was not possible to select an action from the dropdown list. (ER# 291666004)


The Interaction Server database and Interaction Server event log database update scripts for Oracle are now correct. Previously they contained incorrect data types. (ER# 290955168)


Top of Page


Release Number 8.0.003.11 [01/16/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this release. This section describes new features and functionality that were introduced in this release of iWD Manager:

To upgrade your environment from any iWD 8.0.002.xx release to any iWD 8.0.003.xx release, please refer to the upgrade procedure document at https://sites.google.com/a/iwdlab.com/iwd8/deployment/upgrade-procedure.

Corrections and Modifications

This release includes the following corrections and modifications since the previous release of this software:


When searching for tasks in the Global Task List that match a specific capture ID, iWD Manager now returns all the matching tasks. Previously only the first task was returned. (ER# 288247116 )


Inconsistencies in the display of dates in the Global Task List view have been resolved. (ER# 283964424)


Top of Page


Release Number 8.0.003.09 [12/02/11] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. Refer to the iWD 8.0.003.x Upgrade Procedure to upgrade your environment from iWD 8.0.002.x release to the new iWD 8.0.003.x release. The iWD 8.0.003.x Upgrade Procedure is available at https://sites.google.com/a/iwdlab.com/iwd8/deployment/upgrade-procedure.

This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

This release includes the following correction and modification since the previous release of this software:


iWD Manager now correctly uses the JDBC URL when working with Microsoft SQL. Previously, this setting was ignored. (ER# 287110565)


iWD Manager now correctly handles scenarios in which permissions prevent a configuration object from being read. Previously in this scenario, iWD Manager failed while trying to process the configuration. (ER# 277125222)


Top of Page


Release Number 8.0.002.21 [11/01/11] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

This release includes the following correction and modification since the previous release of this software:


iWD Manager now correctly closes the connection to Configuration Server. Previously, iWD Manager was unable to properly disconnect, which resulted in degraded performance over time. (ER# 284320925)


Top of Page


Release Number 8.0.002.20 [10/12/11] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix release of this product. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

There are no corrections or modifications in this release.

Top of Page


Release Number 8.0.002.19 [09/16/11] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix release of this product. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

There are no corrections or modifications in this release.

Top of Page


Release Number 8.0.002.17 [08/11/11] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix release of this product. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

There are no corrections or modifications in this release.

Top of Page


Release Number 8.0.002.16 [08/05/11] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix release of this product. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

This release includes the following corrections and modifications since the previous release of this software:


Previously, under rare circumstances, iWD Manager failed during the login procedure with an error message regarding incorrect locale (fr_). This issue has been resolved. (ER# 277894241)


iWD Manager is now able to read Stat Server configuration from Configuration Server when there are multiple Stat Servers that each have a significant number of options. Previously, iWD Manager was not able to read Stat Server configuration in this scenario. (ER# 278081787)


Top of Page


Release Number 8.0.002.15 [07/14/11] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix release of this product. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

There are no corrections or modifications in this release.

Top of Page


Release Number 8.0.002.11 [04/19/11] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix release of this product. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

This release includes the following corrections and modifications since the previous release of this software:


Images are now displayed properly in iWD Manager Help.


iWD Manager now correctly handles situations when the primary and backup Interaction Servers are both down while an agent is browsing interactions in the Global Task List. Previously, iWD Manager generated HTTP Error 500 in the browser and rendered the browsing session invalid. (ER# 269761221)


Top of Page


Release Number 8.0.002.10 [04/05/11] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix release of this product. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

This release includes the following corrections and modifications since the previous release of this software:


Images are now displayed properly in iWD Manager Help.


Top of Page


Release Number 8.0.002.08 [03/11/11] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

This release includes the following corrections and modifications since the previous release of this software:


iWD Manager now properly connects to Interaction Server in warm standby mode after switchover between the primary and backup Interaction Servers. Previously, an error was displayed in iWD Managerís Global Task List view when the backup Interaction Server became the primary. (ER# 264741140)


The iwd_custom_fields_[databaseType].sql script provided with the iWD Manager IP has been updated. It now contains the correct Data Type for the IWD_businessValue column for MS SQL Server and Oracle. (ER# 266587471)


iWD Manager now allows you to sort the Global Task List by Business Value. (ER# 264347022)


In iWD Manager, the Global Task List now allows you to filter tasks that are in queues outside of the default iWD Business Process (IWDBP). (ER# 264347018)


iWD now correctly sends log messages to the Message Server that is configured as the backup Messager Server when it is running in Primary mode. (ER# 264287428)


The default user can now view interactions in iWD Manager's Global Task List. Previously, the default user was unable to view interactions in the Global Task List even with a default place specified in the Annex tab of the default Person object. Note that the default user is unable to edit interactions. (ER# 263203925)


The Person who is logged into iWD Manager is no longer required to have permission to read objects in the Environment tenant in order to view interactions in the Global Task List. (ER# 258677030)


The Rule name is now updated correctly when a rule is imported that has the same ID and a different name. (ER# 258677015)


Top of Page


Release Number 8.0.001.06 [11/30/10] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

This release includes the following corrections and modifications since the previous release of this software:


On the History tab of the Global Task List, system attribute updates are now correctly filtered if Interaction Server is using an Oracle database. (ER# 263239313)


Backup Configuration Server is now supported. (ER# 260153759)


The Rule name is now correctly updated when a rule is imported that has the same ID (but different name) of an existing rule. (ER# 258677015)


Top of Page


Release Number 8.0.000.20 [09/17/10] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. This section describes new features that were introduced in this release of iWD Manager.

Corrections and Modifications

There are no corrections or modifications included in this release.

Top of Page


Known Issues and Recommendations

This section provides the latest information on known issues and recommendations associated with this product.

Under load, iWD Manager's Global Task List may issue an occasional Error 500 error message in the browser session. This is caused by an internal exception while retrieving interaction snapshots.

Workaround: Click the OK button and repeat the previous action, it is not necessary to restart the application or browser session. (IWD-3379)

Found In:  8.0.003.29 Fixed In:  8.0.003.30

In some cases, the iWD Manager application can stop responding, if the Global Task List is repeatedly refreshed before the previous requests had a chance to finish.

Workaround: Restart the iWD Manager application.

Found In:  8.0.003.26 Fixed In:  8.0.003.30

iWD_Manager.sh and iWD_RuntimeNode.sh files, which are generated during installations of Linux with Websphere, contain DOS style line feeds which render them unusable.

Workaround: Edit the files before executing and remove the extra carriage return symbols (^M). (ER# 323699151)

Found In:  8.0.003.26 Fixed In:  8.0.003.28

Not all strings are localized on the Security Policies screen of iWD Manager. Some strings are still in English only. (ER# 298102013)

Found In:  8.0.003.16 Fixed In: 

The out-of-the-box Global Task List filters and the criteria that a user adds when creating a custom Global Task List filter, are not localized on the Filter screen of iWD Manager. (ER# 298102028)

Found In:  8.0.003.16 Fixed In: 

The word "Confirm" is not localized in the Confirm dialog in iWD Manager. (ER# 298187551)

Found In:  8.0.003.16 Fixed In: 

On the Metric templates screen, the iWD Manager user interface does not display a localized tooltip when the user hovers his mouse over the Add icon (the green plus [+] symbol). (ER# 298101850)

Found In:  8.0.003.16 Fixed In: 

In release 8.0.003 Interaction Server databases are updated from iWD Manager. However, if the Interaction Server databases were initialized with scripts provided in iWD release 8.0.002 or earlier, then Oracle and DB2 updates will not fully succeed.

Workaround: Use the update SQL scripts from the installation package.(ER# 294870526)

Found In: 8.0.003.14 Fixed In: 8.0.003.16

iWD Manager does not support underscores in Configuration Server host names.

Workaround: Use IP addresses instead of host names. (ER# 289479460)

Found In: 8.0.003.09 Fixed In: 

iWD Manager displays only the first 64 bytes of the applied rule names in the History Tab of the Global Task List. To display the entire name, after you install this pre-release, complete the following steps:

  1. Open Configuration Manager and navigate to the Multimedia folder.
  2. Locate the EventLog_DAP Database Access Point.
  3. Click the Options tab.
  4. In the [esp-service-data] section, double-click the RulesApplied configuration option.
  5. Change the iwd_rules default to iwd_rules;string;4000 or to your required maximum value.

Note: The string size should not exceed the size of the iwd_rules field of the RPT_ESP table. The string size in the eventlog_update_mssql.sql script that currently ships with iWD is set to varchar 4000. (ER# 284795616)

Found In: 8.0.003.09 Fixed In: 8.0.003.14

Connectivity issues can arise when you are running iWD Manager on WebSphere Application Server 7 with an Oracle iWD Manager database.

Workaround: Restart the application server. (ER# 282620481)

Found In: 8.0.002.19 Fixed In: 

The UNIX script files to build web application archive (WAR) files for WebSphere are incorrect.

Workaround: Build the WAR files manually. See https://sites.google.com/a/iwdlab.com/iwd8/deployment/building-wars-on-websphere-unix for details. (ER# 269856451)

Found In: 8.0.002.08 Fixed In: 8.0.003.09

Figure 3 ("Task Life Cycle") in the intelligent Workload Distribution 8.0 Deployment Guide currently shows that Assigned tasks can be Held/Resumed. This is incorrect; Assigned tasks cannot be put on hold.

Found In Document Version:  8.0.002.00 Fixed In Document Version:  8.0.003.00

The description of the HoldTask message in Appendix A of the intelligent Workload Distribution 8.0 Deployment Guide incorrectly states "Only tasks that are not held, completed, canceled, or rejected can be held". It should state "Only tasks that are not held, assigned, completed, canceled, or rejected can be held".

Found In Document Version:  8.0.002.00 Fixed In Document Version:  8.0.003.00

The ACME Sample Application webforms will generate an error message when you try to submit them to create a task. This is because in 8.0.001.06, the Web Service Capture Point now has a mandatory parameter createdDateTime. This parameter must be present in the createTask message, but its value can be NULL.

Workaround: Edit the dbutility.php file. This file is included as part of the ACME sample when you install the iWD Manager IP. If you choose the default destination path it will be in C:\Program Files\GCTI\iWD Manager\acme\web. Add the following row to the dbutility.php file:
$params->createdDateTime = NULL;

This row should be added between these existing rows near the bottom of the file:
$params->activationDateTime = NULL;
$params->dueDateTime = NULL;

Found In: 8.0.001.06 Fixed In: 8.0.002.08

The password encoder that is mentioned in the iWD 8.0 Deployment Guide is not available in the installation package for Windows. The password encoder is included in the Solaris installation package.

Workaround: The password encoder can be downloaded from https://sites.google.com/a/iwdlab.com/iwd8/general/password-encoder.

Found In: 8.0.001.06 Fixed In: 8.0.002.08

The script provided in the iWD Manager IP, which updates the Interaction Server interactions database type with iWD custom fields, includes an unsupported Data Type for the IWD_businessValue column for MS SQL Server and Oracle. This unsupported Data Type prevents the user from being able to sort the Global Task List by the Business Value column.

Workaround: You can manually edit the iwd_custom_fields_[databaseType].sql script to change the data type for IWD_businessValue. For MS SQL Server, change this from int to numeric. For Oracle, change this from integer to number. If you have already run this script on your database, you can manually modify the column through your database management console. (ER# 266587471)

Found In: 8.0.001.06 Fixed In: 8.0.002.08

In iWD Manager, the Global Task List does not allow you to sort tasks by Tenant ID and Business Value. (ER# 264347022)

Found In: 8.0.001.06 Fixed In: 8.0.002.08

In iWD Manager, the Global Task List does not allow you to filter tasks that are in queues outside of the default iWD Business Process (IWDBP). (ER# 264347018)

Found In: 8.0.001.06 Fixed In: 8.0.002.08

In iWD Manager, the Pending filter does not display tasks that are in queues that are outside of the default iWD Business Process (IWDBP). (ER# 264347011)

Found In: 8.0.001.06 Fixed In: 

iWD Manager's age calculation for interactions is incorrect. (ER# 264346979)

Found In: 8.0.001.06 Fixed In: 8.0.003.09

iWD does not send log messages to the Message Server that is configured as the backup Messager Server when it is running in Primary mode. (ER# 264287428)

Found In: 8.0.001.06 Fixed In: 8.0.002.08

The default user cannot view interactions in iWD Manager's Global Task List even with a default place specified in the Annex tab of the default Person object.

Workaround:

  1. In Configuration Manager, create a new Access Group (or use an existing Access Group).
  2. In iWD Manager, create a new security role in your tenant, and map it to Access Group in Step 1.
  3. In iWD Manager, add all permissions to this role.
  4. In Configuration Manager, under your tenant (which is mapped to the iWD tenant), create an agent and a place. Assign the place to the agent, and assign the agent to the Access Group.

(ER# 263203925)

Found In: 8.0.001.06 Fixed In: 8.0.002.08

The information in the "Interaction Custom Properties" section in the intelligent Workload Distribution 8.0 Deployment Guide applies to sorting by columns in the Global Task List as well as filtering by columns in the Global Task List.

Found In Document Version:  8.0.001.00 Fixed In Document Version:  8.0.002.00

When using Internet Explorer 8 as a browser for iWD Manager, performance degradation might occur over time.

Workaround: Restart the browser or use an alternate browser. The recommended browser for iWD Manager is Firefox. (ER# 258677036)

Found In: 8.0.000.20 Fixed In: 8.0.003.11

iWD Manager does not support backup Configuration Server. During installation, specify the primary Configuration Server information when you are prompted for the backup Configuration Server information. If there is no backup Configuration Server in your environment, you still must enter the Configuration Server details in both places during installation. (ER# 260153759)

Found In: 8.0.000.20 Fixed In: 8.0.001.06

When connection to the iWD Configuration database is lost and restored, iWD Manager asks for database initializing/upgrade on login. This error can be ignored, and you should try to log in again. In some cases, you might need to try several times before you can successfully log into iWD Manager. (ER# 258677033)

Found In: 8.0.000.20 Fixed In: 8.0.001.06

The Person who is logged into iWD Manager must have permission to read objects in the Environment tenant in order to view interactions in the Global Task List. (ER# 258677030)

Found In: 8.0.000.20 Fixed In: 8.0.002.08

The Rule name is not updated when a rule is imported that has the same ID and a different name. (ER# 258677015)

Found In: 8.0.000.20 Fixed In: 8.0.001.06

Top of Page


Discontinued Support

This section documents features that are no longer supported in this software. This cumulative list is in release-number order with the most recently discontinued features at the top of the list. For more information on discontinued support for operating environments and databases, see "Discontinued Support" in the Genesys Supported Operating Environment Reference Guide.


iWD 8.0 does not support the hierarchical multi-tenancy feature available in iWD 7.6.1. In iWD 8.0, managed tenants can only be configured one level deep, below the System tenant.

Discontinued As Of: 8.0.000.20

iWD 8.0 no longer includes the simulator distribution point and simulator distribution point assigner and completer services. Instead, an Interaction Server agent simulator is available as part of the eServices Support Tools package that can be requested from Genesys Order Management.

Discontinued As Of: 8.0.000.20

Internet Explorer 6 is no longer supported.

Discontinued As Of: 8.0.000.20

Top of Page


Internationalization

Information in this section is included for international customers.


Language Packs are supported in the 8.0.003.16 release of this product. Language Packs enable installers to select the language in which the user interface and online help files are displayed. For details about which Language Packs are available, including languages, see the iWD Release Notes section of the Genesys Documentation website.


Top of Page


Additional Information

Additional information on Genesys Telecommunications Laboratories, Inc. is available on our Customer Care website. The following documentation also contains information about this software. Please consult the Deployment Guide first.

Product documentation is provided on the Customer Care website, the Genesys Documentation website, and the Documentation Library DVD (produced monthly).

Note: For the DVD, the New Documents on this DVD page indicates the production date for that disc. Due to disc production schedules, documentation on the Genesys Documentation website may be more up-to-date than what is available on disc immediately after a product is released or updated. To determine the version of a document, check the version number that is located on the second page in PDFs or on the About This File topic in Help files.

Top of Page