Release Note

Genesys Agent Scripting

8.1.x

Genesys Telecommunications Laboratories, Inc. © 2012–2017

Contents

Introduction

Release Number AIX HP-UX PA HP-UX IPF Linux Solaris Windows
8.1.202.08 [09/11/17] – Hot Fix           X
8.1.202.07 [12/14/16] – Hot Fix           X
8.1.202.01 [07/01/16] – General           X
8.1.201.20 [04/15/16] – Hot Fix           X
8.1.201.18 [01/27/16] – Hot Fix           X
8.1.201.15 [07/01/15] – Hot Fix           X
8.1.201.13 [03/18/15] – Hot Fix           X
8.1.201.11 [03/03/15] – Hot Fix           X
8.1.201.10 [01/29/15] – Hot Fix           X
8.1.201.09 [11/20/14] – Hot Fix           X
8.1.201.07 [10/02/14] – Hot Fix           X
8.1.201.03 [08/28/14] – General           X
8.1.200.17 [03/03/14] – Hot Fix           X
8.1.200.16 [01/30/14] – Hot Fix           X
8.1.200.13 [07/29/13] – Hot Fix           X
8.1.200.12 [05/16/13] – General           X
8.1.100.04 [11/29/12] – Hot Fix           X
8.1.100.03 [09/27/12] – General           X
8.1.000.21 [08/10/12] – Hot Fix           X
8.1.000.16 [04/20/12] – General           X

Link to 7.2 Product Release Note (Cumulative)
Known Issues and Recommendations
Discontinued Support
Internationalization
Additional Information


Introduction

This release note applies to all 8.1 releases of Genesys Agent Scripting.

Use of Third-Party Software

Genesys follows applicable third-party redistribution policies to the extent that Genesys solutions utilize third-party functionality. For additional information about third-party software used in this product, see the Read Me. Please contact your Customer Care representative if you have any questions.


Release Number 8.1.202.08 [09/11/17] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features that were introduced in this release of Genesys Agent Scripting.

Corrections and Modifications

There are no corrections or modifications in this release.

Top of Page


Release Number 8.1.202.07 [12/14/16] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features that were introduced in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following correction and modification:


GAS assigner can now successfully initialize AIL factory in the GAD environment. Previously, when the GAD customization was used, the system displayed the message, "ERROR GAS.Assigner Ail Factory has not been initialized yet". (GAS-1087)


Top of Page


Release Number 8.1.202.01 [07/01/16] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. This section describes new features that were introduced in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following correction and modification:


GAS now successfully creates a WAR deployment. Previously, the WAR deployment failed when a user did not have permissions for the file writing operation. (GAS-1037)


Top of Page


Release Number 8.1.201.20 [04/15/16] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features that were introduced in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


You can now use operations with attached data in custom Genesys Agent Scripting (GAS) actions and custom JSP code for multimedia. If you need to work in JSP code with interactions of any media type, use the function GASGenesysUtils.findAnyInteraction(interactionId, placeId, recordId). (GAS-1024)

Note: See the Known Issues and Recommendations section for detailed information about the limited support.


An exception no longer occurs when GAS fails to connect to a web service. (GAS-1031)


You can now use wildcards and regular expressions for the LIKE operation of Assignment Rules. (GAS-1029)


Top of Page


Release Number 8.1.201.18 [01/27/16] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features that were introduced in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


Genesys Agent Scripting no longer uses excess memory when the agent is logged in, and releases outbound interactions as soon as the interactions are done. Previously, when working with outbound campaigns, the web server gradually increased in memory usage if the agent was not logged out. (GAS-952)


When Genesys Agent Scripting Studio opens a new, renamed, or copied project book, default styles and images are now copied to the working folder. (GAS-997)


Genesys Agent Scripting no longer exposes database connection passwords in trace logs for the oracle.ucp.jdbc.PoolDataSource driver. (GAS-1005)


Top of Page


Release Number 8.1.201.15 [07/01/15] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. This section describes new features that were introduced in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


Agent Interaction Layer (AIL) events no longer affect non-active interactions when cleaning up HTTP sessions. (GAS-985)


Genesys Agent Scripting now supports special characters in campaign descriptions. Previously, if the outbound campaign description contained special characters, the getActiveOutboundRecord request failed. (GAS-977)


Genesys Agent Scripting now inserts images in pages correctly. Previously, the image was not copied because the target directory was not created. (GAS-970)


Top of Page


Release Number 8.1.201.13 [03/18/15] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following correction and modification:


Genesys Agent Scripting now implements the XML interface that displays the Mark Done & Get Next Record button. (GAS-963)


Top of Page


Release Number 8.1.201.11 [03/03/15] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


Agent Interaction Layer (AIL) events are now processed in a queued executor. (GAS-952)


Interaction data requests to the main client application are now available for integrated Genesys Agent Scripting web applications via the JavaScript getGASData(key) function. The getGASData(key) function uses the following key string values: interaction, agent, contact, and attached-data. (GAS-950)


Top of Page


Release Number 8.1.201.10 [01/29/15] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


The Genesys Agent Scripting Web application now uses the following HTTP cache control headers:

(GAS-929)


Genesys Agent Scripting web applications can now run without Genesys integration. (GAS-946)


The style sheet references in the web application HTML pages are now placed correctly if the custom HTML layout is used.(GAS-947)


Top of Page


Release Number 8.1.201.09 [11/20/14] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following correction and modification:


Genesys Agent Scripting now processes pending interaction sessions correctly. Previously, interaction sessions might have been incorrectly dropped when the inactivity timeout expired. (GAS-937).


Outbound originated interactions are now correctly Marked Done. Previously, the Outbound interaction might have been incorrectly Marked Done when transferred. (GAS-931, GAS-938).


Top of Page


Release Number 8.1.201.07 [10/02/14] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following correction and modification:


You can now to choose to include the namespace prefix for tag names in the WSDL import wizard. (GAS-917)


Top of Page


Release Number 8.1.201.03 [08/28/14] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. This section describes new features that were introduced in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


Genesys Agent Scripting no longer generates a NumberFormatException error when an agent attempts to close an Outbound Campaign interaction. (GAS-897)


Genesys Agent Scripting no longer generates a NullPointerException error when using the WDSL import wizard. (GAS-896)


Genesys Agent Scripting, with custom code, can now save the scroll position after a button press (which can be applicable for long pages) when the page loads. (GAS-841)


Top of Page


Release Number 8.1.200.17 [03/03/14] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following correction and modification:


Execution of the RecordProcessed user event now depends on the Genesys Agent Scripting Support Mark Done feature (GAS Editor > File > Settings > Advanced), which is applied after rule re-deploying.

If this support is on (in this case Interaction Workspace Done button is hidden), an interaction should be marked done from the Genesys Agent Scripting script. If this support is off, an interaction should be marked done from Interaction Workspace (in this case IWS marks an outbound record processed by itself, the Genesys Agent Scripting script passes the markProcessed step). (GAS-881)


Top of Page


Release Number 8.1.200.16 [01/30/14] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


Genesys Agent Scripting no longer appends the jsessionid to the parameters of the WSDL request. (GAS-844)


Genesys Agent Scripting now relies on a distinct jsessionid in the URL for each interaction. Previously, Genesys Agent Scripting used and cleared cookies on each HTTP request causing other web browser controls in the same Interaction Workspace to work incorrectly. (GAS-851)


Genesys Agent Scripting no longer loads the default Welcome page with inbound calls. Previously, the default Welcome page loaded occasionally, and the GAS->File->Settings->Advanced->Save Page Navigation needed to be turned on when saving the session to stop it from loading. (GAS-856)


Genesys Agent Scripting now displays all labels in the Target Environment -> Configuration File -> G_System_DB_Provider screen corresponding to the fully qualified driver name. Previously, the com.microsoft.sqlserver.jdbc.SQLServerDriver field was labeled as had MSSQL2005 jdbc SQLServerDriver. (GAS-858)


Genesys Agent Scripting no longer generates an exception when opening an interaction involving a connection to Universal Contact Server. (GAS-862)


Genesys Agent Scripting now correctly recognizes number values where an integer is required. (GAS-863)


Top of Page


Release Number 8.1.200.13 [07/29/13] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


Genesys Agent Scripting can now create a .war file when using a network path. Previously, in this scenario, the .war file was empty. (GAS-724, ER# 311126363)


Genesys Agent Scripting now correctly passes a numeric type field to a defined API interface with JSP code for different locales. Previously, this field was formatted as a currency-type field. (GAS-801, ER# 322398492)


Genesys Agent Scripting now handles multiple interactions for Interaction Workspace integrations simultaneously. (GAS-831, ER# 324223813)


Genesys Agent Scripting now properly imports the WSDL with several schemas. (GAS-833, ER# 324631819)


Genesys Agent Scripting now recognizes and updates the active Outbound record in a chain (even if that active Outbound record changed during processing). (GAS-834, ER# 325127954)


Top of Page


Release Number 8.1.200.12 [05/16/13] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. This section describes new features that were introduced in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


On IIS, the Interaction Workspace window now closes for an Outbound + SIP interaction after the Mark Done action is completed. (ER# 309346441)


The copy, cut, and paste operations now behave correctly. (ER# 264906528)


Genesys Agent Scripting now correctly indents HTML lines inside the Java Script code correctly. Previously, when a tab was inserted on a page row, and after switching between the HTML view and the page view and back, the designer added another tab at the beginning of the row. (ER# 315059346)


Genesys Agent Scripting now correctly assigns rules for a project book that was copied from another project book. Previously, when deploying the assignment rules from a new project book, the rules were erased from the original project book. (ER# 315059346)


Genesys Agent Scripting no longer experiences the NullPointerException exception on the second transfer, and it is possible to suspend the script after a transfer. (ER#s 316691247, 314748061)


Genesys Agent Scripting no longer encounters the org.xml.sax.SAXParseException: Premature end of file exception. Previously, this exception occurred intermittently. (ER# 307031782)


The Genesys_Initialization process flow has been removed from the list of process flows. Previously, this process flow caused unexpected behavior. (ER# 306532727)


An OutOfMemory exception no longer occurs in the Genesys Agent Scripting server (on Tomcat) if the Genesys Agent Scripting Application has incorrect parameters such as name, host, and others. (ER# 306966217)


The Genesys Agent Scripting development environment can now import project books created in pre-8.1.x versions of Genesys Agent Scripting. (ER# 305921549)


Genesys Agent Scripting now supports early JavaServer Pages (JSP) compilation. (ER# 314748069)


Top of Page


Release Number 8.1.100.04 [11/29/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following correction and modification:


The Genesys Agent Scripting user interface now preserves the session state when encountering network or script errors upon a user’s action. Previously, in this scenario, a Page Not Found message was occasionally displayed. (ER# 310405583)


Top of Page


Release Number 8.1.100.03 [09/27/12] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. This section describes new features that were introduced in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


Rule assignment now works correctly with all script objects. Previously, rule assignment failed for some Script objects that were incorrectly modified or were from old versions of Genesys Agent Scripting. (ER# 305142048)


Performance of Genesys Agent Scripting Server on Tomcat is improved. Previously, unoptimized code made for some slower HTTP requests, which led to Interaction Workspace freezing. (ER# 305133411)


Now you can correctly attach a script, via attached data, to an interaction. Previously, an attached script was not displayed in Interaction Workspace. (ER# 301742108)


Genesys Agent Scripting development environment now remains open and correctly displays errors in XML, when importing XML. Previously, Genesys Agent Scripting closed when it encountered XML errors. (ER# 301194119)


Top of Page


Release Number 8.1.000.21 [08/10/12] – Hot Fix

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

This is a hot fix for this product. There are no new features or functionality in this release of Genesys Agent Scripting.

Corrections and Modifications

This release includes the following corrections and modifications:


The Interaction Workspace plugin for Genesys Agent Scripting no longer freezes the Interaction Workspace user interface on agent desktops because of web server access problems. (ER# 304590240)


The Interaction Workspace plugin for Genesys Agent Scripting is now correctly initialized during ClickOnce deployment. (ER# 303271157)


The Interaction Workspace plugin for Genesys Agent Scripting now ignores environment entries that are incomplete for Genesys Agent Scripting 8.1.x. Such scripts, created by previous versions of Genesys Agent Scripting, could previously cause the plugin to freeze. (ER# 300751873)


Top of Page


Release Number 8.1.000.16 [04/20/12] – General

Supported Operating Systems
New in This Release
Corrections and Modifications

Supported Operating Systems

The operating systems supported by this release are listed in the Contents, above.

New in This Release

There are no restrictions for this release. This section describes new features that were introduced in the initial 8.1 release of Genesys Agent Scripting.

3rd-party Software Support
(in addition to software already supported)

Database Providers
Please install database drivers for the platform of your choice:

Corrections and Modifications

This release includes the following corrections and modifications that were made between Release 7.2 or earlier releases and the initial 8.1 release:


Genesys Agent Scripting now provides SILENCE(32) as a possible value for the Genesys Outbound Call Result. (ER# 295516035)


Top of Page


Known Issues and Recommendations

This section provides the latest information on known issues and recommendations associated with this product.


When autofocus is disabled on the GAS tab in WDE, the GAS tab becomes optional which may lead to an unwanted condition where an agent cannot mark the interaction as Done. In this case it is recommended that the Support Mark Done feature (found under File > Settings > Advanced tab) is disabled when option interaction-workspace/agent-scripting.auto-focus is set to false. (GAS-1101)
Found In:  8.1.202.08 Fixed In: 

Genesys Agent Scripting editor requires an installed version of Microsoft Visio to be activated before Genesys Agent Scripting editor can be launched. (GAS-1084)
Found In:  8.1.202.07 Fixed In: 

When using a network path that requires authentication GAS might close unexpectedly. (GAS-1062)
Found In:  8.1.202.01 Fixed In: 

The Split Columns and Merge Columns operation is instead splitting and merging selected cells. (GAS-1064)
Found In:  8.1.201.22 Fixed In: 

A table heading missalignment can occur when increasing the number of cells in a row. (GAS-1065)
Found In:  8.1.201.22 Fixed In: 

In GAS editor, columns cannot be added or deleted in tables that have Headers. (GAS-1066)
Found In:  8.1.201.22 Fixed In: 

GAS cannot create a WAR deployment in some cases, and the following error will occur: Cannot find the file \GenesysDemo.war. (GAS-1037)

Found In:  8.1.201.20 Fixed In:  8.1.202.01

The following restrictions apply to email, chat, and Outbound Push Preview support:

(GAS-1024)

Found In:  8.1.201.20 Fixed In: 

Script Suspend and Script Resume do not work for Outbound Push Preview campaigns. (GAS-1018)

Found In:  8.1.201.18 Fixed In: 

Some content in the Genesys Agent Scripting Deployment Guide is misleading. On page 21, in the "Supported Software" section, the heading "Version Control Server Databases Support" should be "Supported Databases".


Genesys Agent Scripting does not support integration with IIS on Windows 2012.


Genesys Agent Scripting WSDL support is limited to WSDL 1.1 with the following restrictions:

  1. Partial support for importing schemas
  2. Partial support for XSD schema types:

Genesys Agent Scripting supports SOAP with the following restrictions:

Genesys Agent Scripting supports HTTP 1.1; however, the advanced HTTP 1.1 features (like authentication) are not supported.

The Genesys Agent Scripting Editor supports WSDL and SOAP with the help of the XML interfaces. For more information, see the following sections in the "XML Interfaces" topic of the Genesys Agent Scripting User's Guide:

(GAS-935)


Genesys Agent Scripting Editor does not retrieve data from a database that uses a 64-bit Oracle driver.

Workaround: Genesys recommends using a 32-bit Oracle driver on a 64-bit Windows server. (GAS-943).


Genesys Agent Scripting looks for Roboto fonts that do not exist in a web application.

Workaround: Download the Roboto font face kit from one of available locations, and place them in the CSS. (GAS-954)

Found In:  8.1.201.10 Fixed In: 

Genesys Agent Scripting loses pending interaction data on failover.

Workaround: Use the Workspace Desktop Edition interface to handle these interactions. (GAS-942)

Found In:  8.1.201.09 Fixed In: 

Attached data cannot be applied to an Outbound Preview interaction before the call is initiated. (GAS-939)

Found In:  8.1.201.07 Fixed In: 

Multiple simultaneous interactions are not supported for the ASPX platform. (GAS-923)

Found In:  8.1.201.07 Fixed In: 

The pre-compilation feature does not work correctly for all JSP files over HTTPS. (GAS-914)

Found In:  8.1.201.03 Fixed In: 

Genesys Agent Scripting sometimes cannot find an interaction on a transfer. If you are experiencing this behavior, consider disabling auto-answer for that DN. (GAS-870)

Found In:  8.1.200.16 Fixed In: 

Attached data is discarded if added on the Outbound Preview Interaction leg of a call. (GAS-839)

Found In:  8.1.200.13 Fixed In: 

In the "Configuration" section of the "Load Balancing and Failover" chapter in the Genesys Agent Scripting Deployment Guide, any instance of error.node.html?script1=gas or /error.node.html?script1=gas1&script2=gas2 should be read as /error.node.html. (ER# 323107543)

Found In:  8.1.200.12 Fixed In:  8.1.201.03

In some situations, static file requests might cause load balancing to work incorrectly after a failover.

Workaround: Reconfigure Apache and Tomcat so that when requests for both static files are received, the jsp files are directed to the same Tomcat node. Use the following steps as an example:

  1. Deploy the Genesys Agent Scripting script to the Apache public directory (for example, htdocs).
  2. Modify the Apache load balancing configuration using the following as an example:
    ProxyPassMatch /gdemo/.*\.jsp balancer://gas-cluster
    stickysession=JSESSIONID|jsessionid nofailover=On
    ProxyPassReverse /gdemo balancer://gas-cluster stickysession=JSESSIONID|jsessionid

    <Proxy /gdemo >
    Order deny,allow
    Allow from all
    </Proxy>

    <Proxy balancer://gas-cluster >
    BalancerMember ajp://host:27009 route=worker0
    BalancerMember ajp://host:28009 route=worker1
    BalancerMember ajp://host:38009 route=worker2
    </Proxy>

    ErrorDocument 500 /error.node.html
    ErrorDocument 501 /error.node.html
    ErrorDocument 502 /error.node.html
    ErrorDocument 503 /error.node.html
    ErrorDocument 504 /error.node.html
    ErrorDocument 505 /error.node.html

(ER# 319073476)

Found In:  8.1.200.12 Fixed In: 

The Apache JMeter page is not available in the Interaction Workspace window.

Workaround: For test purposes, create a new page with the <%@ include file="WWGURLView.jsp" %> html, and add it to a catalog using the Genesys Agent Scripting Editor.

(ER# 312460600)

Found In:  8.1.200.12 Fixed In: 

When compiling to a network path, the Web Application Archive (.WAR) file is empty. (ER# 311126363)

Found In:  8.1.200.12 Fixed In: 

If you try to install Genesys Agent Scripting over an existing version, an "severe internal error" message is displayed and the installation is halted, without stating the reason for this action.

Workaround: Uninstall the existing version first, then install the new version. (ER# 304588947)

Found In:  8.1.001.03 Fixed In: 

Genesys Agent Scripting development environment cannot perform a simulation if you use the GenesysDemo project book and Genesys_Initialization as the default process flow.

Workaround: Use a different project book and/or a different process flow. (ER# 306532727)

Found In:  8.1.001.01 Fixed In:  8.1.200.12

A duplicate G_Agent_IW_Role field is created after a project book upgrade and import from version 7.2 to version 8.1.

Workaround: Manually remove one of the G_Agent_IW_Role fields from the Genesys Agent Scripting Editor Field List. (ER# 307227865)

Found In:  8.1.001.01 Fixed In: 

An OutOfMemory exception may occur in the Genesys Agent Scripting server (on Tomcat) if the Genesys Agent Scripting Application has incorrect parameters such as name, host, and others.

Workaround: You must correct the incorrect parameters. (ER# 306966217)

Found In:  8.1.001.01 Fixed In:  8.1.200.12

Genesys Agent Scripting development environment can not import project books created in pre-8.1.x versions of Genesys Agent Scripting into a Genesys Agent Scripting 8.1.x project book that is currently opened. (ER# 305921549)

Found In:  8.1.000.21 Fixed In:  8.1.200.12

Uninstalling Genesys Agent Scripting removes all sample files that were hanged by the user.

Workaround: If you are upgrading to a newer version of Genesys Agent Scripting and you wish to save changed sample files, save them to a thumb drive or an external directory before uninstalling the old version of Genesys Agent Scripting. (ER# 305720555)

Found In:  8.1.000.20 Fixed In: 

Genesys Agent Scripting can be uninstalled while it is running. Do not do it.

Workaround: To uninstall Genesys Agent Scripting correctly, first exit the program. (ER# 299008183)

Found In:  8.1.000.17 Fixed In: 

Interactions no script attached remain pending on the DN, because Mark Done has not been performed for them. (ER# 304367350)

Found In:  8.1.000.17 Fixed In: 

The Genesys Agent Scripting window in Genesys Agent Desktop displays null for a contact during a voice interaction. (ER# 299008186)

Found In:  8.1.000.17 Fixed In: 

If the Genesys Agent Scripting server is started after an agent is logged in, on that agent's first call for an Outbound campaign, there is no information on interaction. All subsequent calls get the correct interaction information. (ER# 298194754)

Found In:  8.1.000.16 Fixed In: 

From the Genesys Agent Scripting Development Environment, if a script contains text for a language that is not installed on the user's computer, switching edit modes corrupts the text. (ER# 297864655)

Found In:  8.1.000.16 Fixed In: 

Genesys Agent Scripting may display a run-time exception may be shown during an Outbound Campaign interaction.

Workaround: Click on the AGENT SCRIPT area and press F5 to refresh agent Scripting page. (ER# 297808420)

Found In:  8.1.000.16 Fixed In: 

In Windows 2008 with User Account Protection enabled, opening any Project Book without manually asking for administrator rights generates a not valid error.

Workaround: Modify the Genesys Agent Scripting shortcut to run as an administrator of the Genesys Agent Scripting Development Environment. (ER# 291651681)

Found In:  8.1.000.16 Fixed In: 

Recommendation for the Microsoft SQL Server JDBC driver: Use JDK 1.5 or higher; this driver does not support JDK 1.4. (ER# 296842120)

Found In:  8.1.000.16 Fixed In:  8.1.200.12

Recommendation for the Oracle JDBC drivers: Use JDK 1.5 or higher; these drivers do not support JDK 1.4. (ER# 296842118)

Found In:  8.1.000.16 Fixed In:  8.1.200.12

Genesys Agent Scripting does not provide SILENCE(32) as a possible value for the Genesys Outbound Call Result (ER# 295516035)

Found In:  7.2.002.11 Fixed In:  8.1.000.16

Top of Page


Discontinued Support

This section documents features that are no longer supported in this software. This cumulative list is in release-number order with the most recently discontinued features at the top of the list. For more information on discontinued support for operating environments and databases, see Discontinued Support in the Genesys Supported Operating Environment Reference Guide.


IBM DB2 8.1/8.2 is no longer supported.

Discontinued As Of: 8.1.202.07

Microsoft Internet Explorer 8 is no longer supported.

Discontinued As Of: 8.1.202.07

Microsoft Windows XP is no longer supported.

Discontinued As Of: 8.1.201.03

Microsoft Windows Vista is no longer supported.

Discontinued As Of: 8.1.202.07

Microsoft SQL Server 2005 is no longer supported.

Discontinued As Of: 8.1.202.07

Microsoft SQL Server 2000x is no longer supported. (ER# 289895541)

Discontinued As Of: 8.1.000.16

Microsoft Windows Server 2003 is no longer supported.

Discontinued As Of: 8.1.202.07

Microsoft Windows Server 2000 32 bit is no longer supported. (ER# 289895536)

Discontinued As Of: 8.1.000.16

Netscape (all versions) is no longer supported. (ER# 289895546)

Discontinued As Of: 8.1.000.16

Oracle 10g is no longer supported.

Discontinued As Of: 8.1.202.07

Oracle versions 8.1.7 and 9 are no longer supported. (ER# 289895546, 289895553)

Discontinued As Of: 8.1.000.16

Red Hat Enterprise Linux AS version 3 is no longer supported. (ER# 289895582)

Discontinued As Of: 8.1.000.16

The PDF XML Interface option from the XML Wizard is no longer supported. (ER# 297230481, 294896525)

Discontinued As Of: 8.1.000.16

Top of Page


Internationalization

Information in this section is included for international customers.


There are no known internationalization issues in this release.


Top of Page


Additional Information

Additional information on Genesys Telecommunications Laboratories, Inc. is available on our Customer Care website. The following documentation also contains information about this software. Please consult the Deployment Guide and User Guide first.

Product documentation is provided on the Customer Care website, the Genesys Documentation website, and the Documentation Library DVD (produced monthly).

Note: For the DVD, the New Documents on this DVD page indicates the production date for that disc. Due to disc production schedules, documentation on the Genesys Documentation website may be more up-to-date than what is available on disc immediately after a product is released or updated. To determine the version of a document, check the version number that is located on the second page in PDFs or on the About This File topic in Help files.

Top of Page