Jump to: navigation, search

Related Configuration Options

The configuration options can be configured in the main Connector section and in the link-%s section. Options configured in the link-%s section take precedence over options configured in the main Connector section and are applied on that particular link.

The following configuration option enables or disables the Keep-Alive feature:

kpl-interval

Default Value: 10
Valid Value: Any integer from 0-600
Changes Take Effect: Immediately
Related Feature: Keep-Alive Feature Handling

Specifies a keep-alive time interval (in seconds). To check network connectivity, CSTA Connector issues a dedicated KPL request to BroadWorks XSP at the interval specified when there is no other activity on the link. A value of 0 (zero) disables this feature.

This configuration option can be configured in both the Connector and in the link-%s sections. The options configured in the link-%s section take precedence over the options configured in the Connector section and are applied to this particular link. See, the kpl-tolerance option.


kpl-tolerance

Default Value: 0 (zero)
Valid Value: Any integer from 0-10
Changes Take Effect: Immediately
Related Feature: Keep-Alive Feature Handling

Specifies the number of failed keep-alive requests that CSTA Connector permits before considering the XSP link as unresponsive. When an unresponsive link is detected, CSTA Connector closes and reopens this particular XSP link.

This configuration option can be configured in both the Connector and in the link-%s sections. The options configured in the link-%s section take precedence over the options configured in the Connector section and are applied to this particular link. See, the kpl-interval option.


This page was last edited on March 26, 2013, at 13:01.
Comments or questions about this documentation? Contact us for support!