Jump to: navigation, search

DR Peer and Remote Site Deployment

The following tasks describe the steps necessary to deploy SIP Business Continuity in the following scenario:

  • Two sites, S1 and S2, are configured as a DR peer. You want to call the agents in the DR peer from a third site S3.

Unless otherwise stated, refer to the Framework 8.1 SIP Server Deployment Guide for information about the configuration options.

Deploying SIP Business Continuity With a Remote Site

  1. On the third switch, configure two Trunk DNs, and configure the contact option on each DN as follows:
    • First DN: contact=<FQDN of DR peer>
    • Second DN: contact=<FQDN of DR peer>
  2. On both DNs, do no configure the auto-redirect-enabled option.
All other options can remain the same. However, if you want, you can use the options priority and capacity to indicate the preference of one trunk over the other.

Configure ISCC COF access between the following sites:

  • The remote site and the first DR pair site.
  • The remote site and the second DR pair site.
Refer to the Framework 8.1 SIP Server Deployment Guide for instructions. Set the following options in the extrouter section on each SIP Server:
  • cof-feature=true
  • default-network-call-id-matching=sip

This page was last edited on September 23, 2015, at 02:45.
Comments or questions about this documentation? Contact us for support!