Jump to: navigation, search

Configuration Options

LRM Application object

You can set the following configuration options in the [lrm] section on the Options tab of each LRM Application object.

data-retention-days
Default Value: 400
Valid Values: Integer
Changes Take Effect: After restart

Specifies the number of days that LRM keeps data in the database.

lrm-excluded-time-1, lrm-excluded-time-2, lrm-excluded-time-3
Default Value: None
Valid Values: HH:MM:SS (hours, minutes, seconds);(duration in seconds, maximum value is 600)
Changes Take Effect: After restart

Optional. Specifies the time interval (start time, and duration in seconds) for which LRM does not calculate concurrent seats.

For example, a value of 18:00:00;600 means that LRM does not calculate concurrent seats for 10 minutes (600 seconds), starting at 1800 hours.

Warning
  • If you do not use one or more of these options, remove them from the Options tab of the LRM Application object.
  • If you use the option without specifying a value, or with a value in the incorrect format (for example, an empty string), LRM does not work properly and cannot calculate concurrent seats.

lrm-network-switch
Default Value: false
Valid Value: false or true
Changes Take Effect: After restart

Specifies the presence of the network switch under LRM.

schedule
Default Value: 01:00
Valid Value: HH:MM[:SS]
Changes Take Effect: After restart

Specifies the time of day when the LRM executes the statistics gathering job.

nightly_data_calculation_max_days
Default Value: 7
Valid Value: Integer
Changes Take Effect: After restart

Specifies the maximum number of days for which the nightly scheduled job will calculate ICON and GVP data, if the LRM missed calculating data for some days.

first_time_data_calculation_max_days
Default Value: 2
Valid Value: Integer
Changes Take Effect: After restart

Specifies the maximum number of days the nightly scheduled job will calculate ICON and GVP data for the first time the LRM runs the statistics job.

schedule-retry-max
Default Value: 0
Valid Value: Integer
Changes Take Effect: After restart

Specifies the number of times the LRM should attempt to retry the nightly statistics gathering job if it fails.

schedule-retry-delay
Default Value: 30
Valid Value: Integer
Changes Take Effect: After restart

Specifies the delay (in minutes) after the previous statistics job has failed before it tries to run the job again.

DAP Application object

Set the following configuration option in the [lrm] section on the Options tab of the DAP Application object.

role
Default Value: main
Valid Value: main or icon
Changes Take Effect: Immediately

Specifies the role of the DAP. Set the LRM DAP value to main and the ICON DAP value icon.

GAX Application object

Set the following configuration options in the [lrm] section on the Options tab of the GAX Application object.

agentgroup_enabled
Default Value: false
Valid Value: true or false
Changes Take Effect: Immediately

Specifies whether Agent group usage reporting is enabled.

license_type
Default Value: concurrent
Valid Value: concurrent or enabled
Changes Take Effect: Immediately

Specifies either enabled or concurrent as the license type. When set to enabled, only enabled seat information is shown. When concurrent, both the enabled and concurrent seat information are shown. By default, LRM reports using concurrent seats.

operation_type
Default Value: compliance
Valid value: compliance or hosted
Changes take Effect: Next user login

Specifies whether LRM operates in either hosted mode or compliance mode. When operating in hosted mode, all LRM features are available. When operating in compliance mode, the following features are not available: reports for tenants, and provisioned count configuration.

placegroup_enabled
Default Value: false
Valid Value: true or false
Changes Take Effect: Immediately

Specifies whether Place Group usage reporting is enabled.

This page was last edited on July 31, 2014, at 19:46.
Comments or questions about this documentation? Contact us for support!