Jump to: navigation, search

HeadsetValidation

The following test cases can help you verify that headset-specific features work with the SIP Endpoint SDK.

USB Headsets

  • Simple Incoming and Outgoing call with SIP Endpoint. Audio should be fine with headset.
  • Second call from SIP Endpoint while first call is on hold. Audio should be fine with headset.
  • Microphone and Speaker settings in the SIP Endpoint SDK should select the connected headset as Default settings.
  • Volume control should be controlled using connected USB headset.
  • Call can be muted using the mute functionality of the USB headset.
  • Plugging in or unplugging the headset in the middle of the call should result in media stream properly redirected to or from this device. There is a known issue for this case.
  • Answering or disconnecting the call using the call control button of the headset will not work right now, as it requires specific integration and development from the SIP Endpoint SDK.

Bluetooth Headsets

  • Simple Incoming and Outgoing call with SIP Endpoint. Audio should be fine with headset.
  • Second call from SIP Endpoint while first call is on hold. Audio should be fine with headset.
  • Microphone and Speaker settings in the SIP Endpoint SDK should select the connected headset as Default settings.
  • Audio should work properly when the user is roaming around while in a call.
  • When the user is out of range, audio will be disturbed and the audio is restored once the user is back in range.
  • Volume control should be controlled using the Bluetooth headset.
  • Call can be muted using the mute functionality of the Bluetooth headset.
  • Plugging in or unplugging the headset in the middle of the call should result in media stream properly redirected to or from this device. There is a known issue for this case.
  • Answering or disconnecting the call using the call control button of the headset will not work right now, as it requires specific integration and development from the SIP Endpoint SDK.
This page was last edited on December 20, 2013, at 05:14.
blog comments powered by Disqus